资产管理标准与技术ISO技术委员会（TC）、分技术委员会委员会（SC）下设共2373个工作组（WG）信息查询。
| 编号 | 英文名称 | 中文 | 状态 |
|---|---|---|---|
| ISO/TC 2/WG 13 | Washer and non-threaded fasteners | 垫圈和无螺纹的紧固件 | 活动 |
| ISO/TC 2/WG 17 | Stainless steel fasteners | 不锈钢紧固件 | 活动 |
| ISO/TC 2/WG 18 | Pre-applied adhesive systems for threaded fasteners | 用于螺纹紧固件的预涂胶粘剂系统 | 活动 |
| ISO/TC 4/WG 15 | Parts library - Reference dictionary | 零件库 - 参考字典 | 活动 |
| ISO/TC 4/WG 18 | Rolling bearing vocabulary | 滚动轴承的词汇 | 活动 |
| ISO/TC 4/WG 24 | Imperfections of ceramic rolling elements | 陶瓷轧制元件的不完善之处 | 活动 |
| ISO/TC 4/WG 25 | Cleanliness for rolling bearings | 滚动轴承的清洁度 | 活动 |
| ISO/TC 4/SC 4/WG 5 | Symbols, terms and definitions associated with GPS | 与GPS相关的符号、术语和定义 | 活动 |
| ISO/TC 4/SC 4/WG 7 | Characteristics and tolerance values associated with GPS | 与GPS相关的特性和公差值 | 活动 |
| ISO/TC 4/SC 5/WG 1 | Dimensions and tolerances | 尺寸和公差 | 活动 |
| ISO/TC 4/SC 5/WG 4 | Revision of ISO 12297-1 | 对ISO 12297-1的修订 | 活动 |
| ISO/TC 4/SC 7/WG 2 | Spherical plain bearings rod ends for hydraulic fluid power cylinders | 用于液压流体动力缸的调心滑动轴承杆端 | 活动 |
| ISO/TC 4/SC 8/WG 9 | Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings | 滚动轴承--普遍载荷轴承的修正参考寿命的计算方法 | 活动 |
| ISO/TC 5/SC 2/WG 20 | Laying of ductile iron pipelines | 铺设球墨铸铁管线 | 活动 |
| ISO/TC 5/SC 2/WG 22 | Life cycle analysis and recycling | 生命周期分析和回收利用 | 活动 |
| ISO/TC 5/SC 2/WG 23 | External protection | 外部保护 | 活动 |
| ISO/TC 5/SC 2/WG 24 | Internal Protection | 内部保护 | 活动 |
| ISO/TC 5/SC 2/WG 26 | Design and asset management | 设计和资产管理 | 活动 |
| ISO/TC 5/SC 2/WG 27 | Materials in contact with drinking water | 与饮用水接触的材料 | 活动 |
| ISO/TC 5/SC 10/WG 8 | Definition of nominal size and nominal pressure | 公称尺寸和公称压力的定义 | 活动 |
| ISO/TC 6/WG 3 | Optical properties | 光学特性 | 活动 |
| ISO/TC 6/WG 7 | Cores for reels of paper | 卷轴的纸芯 | 活动 |
| ISO/TC 6/WG 14 | Recycling | 回收利用 | 活动 |
| ISO/TC 6/WG 15 | Pulp Methods | 制浆方法 | 活动 |
| ISO/TC 6/WG 16 | Lignin Analyses | 木质素分析 | 活动 |
| ISO/TC 6/SC 2/WG 25 | Surface roughness | 表面粗糙度 | 活动 |
| ISO/TC 6/SC 2/WG 26 | Microbiological test methods | 微生物测试方法 | 活动 |
| ISO/TC 6/SC 2/WG 27 | Tissue test methods | 组织测试方法 | 活动 |
| ISO/TC 6/SC 2/WG 39 | Joint ISOTC 6/SC 2 - ISO/TC 130 WG: Printability testing | ISOTC 6/SC 2 - ISO/TC 130联合工作组：可印刷性测试 | 活动 |
| ISO/TC 6/SC 2/WG 45 | Corrugated fibreboard test methods | 波纹纤维板的测试方法 | 活动 |
| ISO/TC 6/SC 2/WG 47 | Water absorptiveness of paper and board | 纸和纸板的吸水率 | 活动 |
| ISO/TC 6/SC 2/WG 48 | Bond strength | 粘合强度 | 活动 |
| ISO/TC 8/WG 3 | Special offshore structures and support vessels | 特殊的海上结构和支持船只 | 活动 |
| ISO/TC 8/WG 4 | Maritime security | 海上安全 | 活动 |
| ISO/TC 8/WG 6 | Ship recycling | 船舶回收 | 活动 |
| ISO/TC 8/WG 8 | Liquid and gas fueled vessels | 以液体和气体为燃料的船只 | 活动 |
| ISO/TC 8/WG 10 | Smart shipping | 智能航运 | 活动 |
| ISO/TC 8/WG 11 | Dredgers | 挖泥船 | 活动 |
| ISO/TC 8/WG 12 | Aquatic nuisance species | 水生有害物种 | 活动 |
| ISO/TC 8/WG 14 | Maritime education and training | 海事教育和培训 | 活动 |
| ISO/TC 8/SC 1/WG 1 | Lifesaving appliances and arrangements | 救生设备和安排 | 活动 |
| ISO/TC 8/SC 1/WG 2 | Miscellaneous Safety Equipment | 杂项安全设备 | 活动 |
| ISO/TC 8/SC 1/WG 3 | Fire protection | 火灾保护 | 活动 |
| ISO/TC 8/SC 2/WG 3 | Environmental response | 环境反应 | 活动 |
| ISO/TC 8/SC 2/WG 4 | Management of ship waste | 船舶废弃物的管理 | 活动 |
| ISO/TC 8/SC 2/WG 5 | Anti-fouling systems on ships | 船舶上的防污系统 | 活动 |
| ISO/TC 8/SC 2/WG 10 | Exhaust gas cleaning systems | 废气净化系统 | 活动 |
| ISO/TC 8/SC 2/WG 11 | Ships’ energy efficiency data collection | 船舶能源效率数据收集 | 活动 |
| ISO/TC 8/SC 2/WG 12 | Marine liquefied hydrogen transfer arms | 船用液化氢气输送武器 | 活动 |
| ISO/TC 8/SC 2/WG 13 | In-water cleaning of ship's biofouling | 船舶生物污损的水内清洗 | 活动 |
| ISO/TC 8/SC 3/WG 7 | Heating, ventilation and air conditioning | 供暖、通风和空调 | 活动 |
| ISO/TC 8/SC 3/WG 10 | Ship Utilities in Port | 港口的船舶公用设施 | 活动 |
| ISO/TC 8/SC 3/WG 15 | Pressure/vacuum valves for cargo tanks and devices to prevent the passage of flame | 货舱的压力/真空阀和防止火焰通过的装置 | 活动 |
| ISO/TC 8/SC 3/WG 17 | Remote shutdown systems | 远程关机系统 | 活动 |
| ISO/TC 8/SC 3/WG 18 | Drain facilities for oil and water tanks | 油箱和水箱的排水设施 | 活动 |
| ISO/TC 8/SC 3/WG 19 | Alternative fuels machinery systems and components | 替代燃料机械系统和部件 | 活动 |
| ISO/TC 8/SC 4/WG 2 | Deck machinery | 甲板机械 | 活动 |
| ISO/TC 8/SC 4/WG 3 | Outfitting | 装备 | 活动 |
| ISO/TC 8/SC 4/WG 4 | Ship's mooring and towing fittings | 船舶的停泊和拖曳装置 | 活动 |
| ISO/TC 8/SC 4/WG 6 | Marine lifting appliances | 船舶起重设备 | 活动 |
| ISO/TC 8/SC 4/WG 7 | Marine cargo securing devices | 海上货物固定装置 | 活动 |
| ISO/TC 8/SC 4/WG 11 | Marine equipment with Hi-Mn steel for cryogenic temperature | 用于低温的高锰钢海洋设备 | 活动 |
| ISO/TC 8/SC 6/WG 1 | Gyro compasses | 陀螺罗盘 | 活动 |
| ISO/TC 8/SC 6/WG 3 | Magnetic compasses and binnacles | 磁罗盘和船帆 | 活动 |
| ISO/TC 8/SC 6/WG 5 | Night vision equipment for high speed craft | 高速飞船的夜视设备 | 活动 |
| ISO/TC 8/SC 6/WG 9 | Indicators | 指标 | 活动 |
| ISO/TC 8/SC 6/WG 16 | Ship Communication Network Systems | 船舶通信网络系统 | 活动 |
| ISO/TC 8/SC 6/WG 17 | Speed trial data analysis | 速度试验数据分析 | 活动 |
| ISO/TC 8/SC 7/WG 1 | Safety and sustainability management systems for inland waterways | 内陆航道的安全和可持续性管理系统 | 活动 |
| ISO/TC 8/SC 8/WG 14 | Propulsion system | 推进系统 | 活动 |
| ISO/TC 8/SC 8/WG 26 | Ship’s accommodation habitability | 船舶住宿的可居住性 | 活动 |
| ISO/TC 8/SC 8/WG 28 | Cabin system | 机舱系统 | 活动 |
| ISO/TC 8/SC 8/WG 29 | Wire rope lifting platform | 钢丝绳升降平台 | 活动 |
| ISO/TC 8/SC 8/WG 30 | Single-leaf doors | 单叶门 | 活动 |
| ISO/TC 8/SC 8/WG 31 | Ladders | 梯子 | 活动 |
| ISO/TC 8/SC 8/WG 32 | Alternative fuels for maritime sector | 海事部门的替代燃料 | 活动 |
| ISO/TC 8/SC 11/WG 2 | Maritime operational data model | 海上作业数据模型 | 活动 |
| ISO/TC 8/SC 11/WG 3 | Software-based PMS | 基于软件的PMS | 活动 |
| ISO/TC 8/SC 12/WG 2 | Safety and hull integrity | 安全性和船体完整性 | 活动 |
| ISO/TC 8/SC 12/WG 3 | Equipment | 设备 | 活动 |
| ISO/TC 8/SC 12/WG 5 | Quality assessment and acceptance criteria | 质量评估和验收标准 | 活动 |
| ISO/TC 8/SC 12/WG 6 | Environment and sustainability | 环境和可持续性 | 活动 |
| ISO/TC 8/SC 13/WG 1 | Submersibles | 潜水器 | 活动 |
| ISO/TC 8/SC 13/WG 2 | Ocean hydrometeorological observation | 海洋水文气象观测 | 活动 |
| ISO/TC 8/SC 13/WG 3 | Seawater desalination | 海水淡化 | 活动 |
| ISO/TC 8/SC 13/WG 4 | Marine environment impact assessment | 海洋环境影响评估 | 活动 |
| ISO/TC 8/SC 13/WG 5 | Coastal blue carbon | 沿海蓝碳 | 活动 |
| ISO/TC 8/SC 13/WG 6 | Seabed exploration | 海底勘探 | 活动 |
| ISO/TC 10/JWG 21 | Joint ISO/TC 10 - IEC/TC 3 WG: Work on the ISO 81355 series standards | ISO/TC 10 - IEC/TC 3联合工作组：ISO 81355系列标准的工作 | 活动 |
| ISO/TC 10/WG 16 | 3D models: Presentation of product definition data | 三维模型产品定义数据的展示 | 活动 |
| ISO/TC 10/WG 17 | Vocabulary of terms and definitions | 术语和定义的词汇表 | 活动 |
| ISO/TC 10/WG 18 | Drawing and writing instruments | 绘画和书写工具 | 活动 |
| ISO/TC 10/WG 19 | Harmonization ISO 129 and ISO 128 series | 统一ISO 129和ISO 128系列 | 活动 |
| ISO/TC 10/WG 20 | Design and documentation for manufacture, assembly, disassembly and end-of-life processing | 制造、装配、拆卸和报废处理的设计和文件 | 活动 |
| ISO/TC 10/SC 1/JWG 12 | TPD and GPS harmonization | TPD和GPS的协调 | 活动 |
| ISO/TC 10/SC 1/JWG 16 | Joint ISO/TC 10/SC 1 - IEC/TC 3 WG: Preparation of instructions for use | ISO/TC 10/SC 1-IEC/TC 3联合工作组：编写使用说明 | 活动 |
| ISO/TC 10/SC 1/WG 10 | ISO 7083 and Validation Team for TPD Symbols | ISO 7083和TPD符号的验证小组 | 活动 |
| ISO/TC 10/SC 6/WG 21 | Classification of technical requirements | 技术要求的分类 | 活动 |
| ISO/TC 10/SC 6/WG 22 | Three-dimensional modeling | 三维建模 | 活动 |
| ISO/TC 10/SC 6/WG 23 | Finite element analysis (FEA) | 有限元分析（FEA） | 活动 |
| ISO/TC 10/SC 8/WG 16 | New forms of construction documentation | 建筑文件的新形式 | 活动 |
| ISO/TC 10/SC 8/WG 18 | Principles for digital presentation for building and construction including prefabrication | 建筑和施工的数字展示原则，包括预制 | 活动 |
| ISO/TC 10/SC 10/JWG 10 | Joint ISO/TC 10/SC 10 - IEC/TC 3 WG: Reference designation system | ISO/TC 10/SC 10 - IEC/TC 3联合工作组：参照物指定系统 | 活动 |
| ISO/TC 10/SC 10/WG 9 | Diagrams and related data | 图表和相关数据 | 活动 |
| ISO/TC 10/SC 10/WG 13 | Graphical symbols for diagrams | 图表的图形符号 | 活动 |
| ISO/TC 12/WG 21 | Quantities and units - General | 数量和单位 - 一般 | 活动 |
| ISO/TC 17/WG 27 | Revision of ISO 14404-3 | 对ISO 14404-3的修订 | 活动 |
| ISO/TC 17/SC 1/WG 74 | Determination of oxygen after fusion in a current of inert gas | 在惰性气体电流中融合后氧气的测定 | 活动 |
| ISO/TC 17/SC 1/WG 75 | Determination of multi-element in low alloy steel by ICP-AES | 用ICP-AES测定低合金钢中的多元素含量 | 活动 |
| ISO/TC 17/SC 3/WG 16 | Technical delivery conditions for structural steels with improved atmospheric corrosion resistance | 提高耐大气腐蚀性的结构钢的技术交付条件 | 活动 |
| ISO/TC 17/SC 3/WG 17 | Technical delivery conditions for seismic-proof improved structural steels for building | 建筑用抗震改良结构钢的技术交付条件 | 活动 |
| ISO/TC 17/SC 3/WG 18 | Hot rolled longitudinally profiled steel plate | 热轧纵向异型钢板 | 活动 |
| ISO/TC 17/SC 7/WG 2 | Micrographic determination of the apparent grain size | 表观粒度的显微测定 | 活动 |
| ISO/TC 17/SC 7/WG 3 | Slow strain rate test | 慢速应变率试验 | 活动 |
| ISO/TC 17/SC 7/WG 4 | Determination of content of non-metallic inclusions — Micrographic method using standard diagrams | 测定非金属夹杂物的含量 - 使用标准图的显微方法 | 活动 |
| ISO/TC 17/SC 11/WG 25 | Steel castings | 钢铁铸件 | 活动 |
| ISO/TC 17/SC 16/WG 8 | Revision of ISO 15630-3 | 对ISO 15630-3的修订 | 活动 |
| ISO/TC 17/SC 16/WG 13 | Stainless steel (STS) bars for the reinforcement of concrete | 用于加固混凝土的不锈钢（STS）钢筋 | 活动 |
| ISO/TC 17/SC 16/WG 14 | Sustainability in prestressed and reinforcing steels | 预应力钢和加固钢的可持续性 | 活动 |
| ISO/TC 17/SC 16/WG 15 | Welded steel fabrics | 焊接的钢制织物 | 活动 |
| ISO/TC 17/SC 16/WG 16 | Revision of ISO 6934-5 | 对ISO 6934-5的修订 | 活动 |
| ISO/TC 17/SC 16/WG 17 | Revision of ISO 6934-2 | 对ISO 6934-2的修订 | 活动 |
| ISO/TC 17/SC 17/WG 10 | Non-parallel steel wire and cords for tyre reinforcement | 用于轮胎加固的非平行钢丝和钢丝绳 | 活动 |
| ISO/TC 17/SC 17/WG 17 | Carbon steel wire for bedding and seating springs | 用于衬垫和定位弹簧的碳钢丝 | 活动 |
| ISO/TC 17/SC 17/WG 18 | Steel wire rod for bridge cable wire | 桥梁电缆线用钢线杆 | 活动 |
| ISO/TC 17/SC 19/WG 1 | Non-destructive testing | 非破坏性测试 | 活动 |
| ISO/TC 20/SC 1/WG 3 | Solid state remote power controllers - Performance requirements and Hybrid remote power controller - Performance requirements | 固态远程电源控制器 - 性能要求和混合远程电源控制器 - 性能要求 | 活动 |
| ISO/TC 20/SC 1/WG 5 | Aircraft electric cables - General requirements | 飞机电缆 - 一般要求 | 活动 |
| ISO/TC 20/SC 1/WG 9 | Aircraft circuit breakers | 飞机断路器 | 活动 |
| ISO/TC 20/SC 1/WG 13 | Characteristics of aircraft electrical systems (Revision of ISO 1540) | 飞机电气系统的特性（ISO 1540的修订版） | 活动 |
| ISO/TC 20/SC 1/WG 15 | LED power light | LED电源灯 | 活动 |
| ISO/TC 20/SC 4/WG 3 | Supporting documents | 支持性文件 | 活动 |
| ISO/TC 20/SC 6/WG 1 | Atmosphere from 30 to 120 km | 30至120公里的大气层 | 活动 |
| ISO/TC 20/SC 8/WG 2 | Flight dynamics concepts, quantities and symbols | 飞行动力学的概念、数量和符号 | 活动 |
| ISO/TC 20/SC 10/WG 1 | Joint ISO/TC 20/SC 10 - ISO/TC 131/SC 7 WG: Seals and seal retainers | ISO/TC 20/SC 10 - ISO/TC 131/SC 7联合工作组：密封件和密封件固定装置 | 活动 |
| ISO/TC 20/SC 10/WG 3 | Tubing and tube retaining devices | 管子和管子固定装置 | 活动 |
| ISO/TC 20/SC 10/WG 6 | Couplings for rigid pipe | 用于刚性管道的联轴器 | 活动 |
| ISO/TC 20/SC 10/WG 8 | Hydraulic fluids and fluid contamination control | 液压油和液体污染控制 | 活动 |
| ISO/TC 20/SC 10/WG 9 | Hydraulic power and actuation equipment | 液压动力和驱动设备 | 活动 |
| ISO/TC 20/SC 10/WG 14 | Hose assemblies | 软管组件 | 活动 |
| ISO/TC 20/SC 14/WG 1 | Design engineering and production | 设计工程和生产 | 活动 |
| ISO/TC 20/SC 14/WG 2 | System requirements, verification and validation, interfaces, integration, and test | 系统要求、验证和确认、接口、集成和测试 | 活动 |
| ISO/TC 20/SC 14/WG 3 | Operations and support systems | 业务和支持系统 | 活动 |
| ISO/TC 20/SC 14/WG 4 | Space environment (natural and artificial) | 空间环境（自然和人工） | 活动 |
| ISO/TC 20/SC 14/WG 5 | Space System Program Management and Quality | 空间系统计划管理和质量 | 活动 |
| ISO/TC 20/SC 14/WG 6 | Materials and processes | 材料和工艺 | 活动 |
| ISO/TC 20/SC 14/WG 7 | Orbital Debris Working Group | 轨道碎片工作小组 | 活动 |
| ISO/TC 20/SC 14/WG 8 | Downstream space services and space-based applications | 下游空间服务和天基应用 | 活动 |
| ISO/TC 20/SC 16/JWG 7 | Joint ISO/TC 20/SC 16 - ISO/TC 43/SC 1 WG: Noise measurements for UAS (Unmanned Aircraft systems) | ISO/TC 20/SC 16 - ISO/TC 43/SC 1联合工作组：无人机系统（UAS）的噪声测量 | 活动 |
| ISO/TC 20/SC 16/WG 1 | General | 一般 | 活动 |
| ISO/TC 20/SC 16/WG 2 | Product manufacturing and maintenance | 产品制造和维护 | 活动 |
| ISO/TC 20/SC 16/WG 3 | Operations and procedures | 业务和程序 | 活动 |
| ISO/TC 20/SC 16/WG 4 | UAS Traffic Management | 无人机系统交通管理 | 活动 |
| ISO/TC 20/SC 16/WG 5 | Testing and evaluation | 测试和评估 | 活动 |
| ISO/TC 20/SC 16/WG 6 | UAS subsystems | 无人机系统子系统 | 活动 |
| ISO/TC 20/SC 16/WG 8 | Counter UAS | 应对无人机系统 | 活动 |
| ISO/TC 20/SC 17/WG 1 | Infrastructure and equipment for vertiports | 口岸的基础设施和设备 | 活动 |
| ISO/TC 20/SC 18/WG 1 | Surface treatment | 表面处理 | 活动 |
| ISO/TC 21/SC 3/WG 3 | Self-contained smoke alarms | 自带烟雾报警器 | 活动 |
| ISO/TC 21/SC 3/WG 5 | Planning and installation | 规划和安装 | 活动 |
| ISO/TC 21/SC 3/WG 6 | Smoke detectors | 烟雾探测器 | 活动 |
| ISO/TC 21/SC 3/WG 15 | Sound systems and alarm devices | 声音系统和警报装置 | 活动 |
| ISO/TC 21/SC 3/WG 16 | Definitions | 定义 | 活动 |
| ISO/TC 21/SC 3/WG 24 | Video fire detectors | 视频火灾探测器 | 活动 |
| ISO/TC 21/SC 3/WG 27 | Line-type heat detectors | 线路型热检测器 | 活动 |
| ISO/TC 21/SC 5/WG 9 | Sprinklers and nozzles | 洒水器和喷头 | 活动 |
| ISO/TC 21/SC 5/WG 10 | Valves | 阀门 | 活动 |
| ISO/TC 21/SC 5/WG 11 | Pipes and fittings | 管子和配件 | 活动 |
| ISO/TC 21/SC 6/WG 2 | Extinguishing powders | 灭火粉 | 活动 |
| ISO/TC 21/SC 6/WG 4 | Water-based fire extinguishing agents | 水基灭火剂 | 活动 |
| ISO/TC 21/SC 6/WG 8 | Vehicle mounted compressed air foam systems | 车载压缩空气泡沫系统 | 活动 |
| ISO/TC 21/SC 8/WG 5 | General Requirements | 一般要求 | 活动 |
| ISO/TC 21/SC 8/WG 6 | Physical properties and system design (extinguishants CF3I, FK-5-1-12, HCFC Blend A, HFC 125, HFC 227ea, HFC 23, HFC 236fa) | 物理特性和系统设计（灭火剂CF3I、FK-5-1-12、HCFC混合物A、HFC 125、HFC 227ea、HFC 23、HFC 236fa） | 活动 |
| ISO/TC 21/SC 8/WG 10 | Condensed aerosol fire extinguishing systems | 浓缩气溶胶灭火系统 | 活动 |
| ISO/TC 22/WG 17 | Code VIN – Code WMI | 代码VIN - 代码WMI | 活动 |
| ISO/TC 22/WG 18 | Exterior protection | 外部保护 | 活动 |
| ISO/TC 22/SC 31/JWG 1 | Joint ISO/TC 22/SC 31 - IEC/TC 69 WG: Vehicle to grid communication interface (V2G CI) | ISO/TC 22/SC 31-IEC/TC 69联合工作组：车辆与电网通信接口（V2G CI） | 活动 |
| ISO/TC 22/SC 31/WG 2 | Vehicle diagnostic protocols | 车辆诊断协议 | 活动 |
| ISO/TC 22/SC 31/WG 3 | In-vehicle networks | 车载网络 | 活动 |
| ISO/TC 22/SC 31/WG 4 | Network applications | 网络应用 | 活动 |
| ISO/TC 22/SC 31/WG 5 | Test equipment/Data eXchange Formats | 测试设备/数据交换格式 | 活动 |
| ISO/TC 22/SC 31/WG 6 | Extended vehicle/Remote diagnostics | 扩展的车辆/远程诊断 | 活动 |
| ISO/TC 22/SC 31/WG 9 | Sensor data interface for automated driving functions | 用于自动驾驶功能的传感器数据接口 | 活动 |
| ISO/TC 22/SC 32/WG 1 | Ignition Equipment | 点火设备 | 活动 |
| ISO/TC 22/SC 32/WG 2 | Environmental conditions | 环境条件 | 活动 |
| ISO/TC 22/SC 32/WG 3 | Electromagnetic compatibility | 电磁兼容性 | 活动 |
| ISO/TC 22/SC 32/WG 4 | Automotive electrical cables | 汽车电气电缆 | 活动 |
| ISO/TC 22/SC 32/WG 5 | Fuses and circuit breakers | 保险丝和断路器 | 活动 |
| ISO/TC 22/SC 32/WG 6 | On-board electrical connections | 车载电气连接 | 活动 |
| ISO/TC 22/SC 32/WG 8 | Functional safety | 功能安全 | 活动 |
| ISO/TC 22/SC 32/WG 9 | Electrical connections between towing and towed vehicles | 牵引车辆和被牵引车辆之间的电气连接 | 活动 |
| ISO/TC 22/SC 32/WG 10 | Optical components - Test methods and requirements | 光学元件 - 测试方法和要求 | 活动 |
| ISO/TC 22/SC 32/WG 11 | Cybersecurity | 网络安全 | 活动 |
| ISO/TC 22/SC 32/WG 12 | Software update | 软件更新 | 活动 |
| ISO/TC 22/SC 32/WG 13 | Safety for driving automation systems | 驾驶自动化系统的安全性 | 活动 |
| ISO/TC 22/SC 32/WG 14 | Safety and Artificial Intelligence | 安全和人工智能 | 活动 |
| ISO/TC 22/SC 33/WG 2 | Vehicle dynamics of passenger cars | 乘用车的车辆动力学 | 活动 |
| ISO/TC 22/SC 33/WG 3 | Driver assistance and 活动 safety functions | 驾驶员辅助和主动安全功能 | 活动 |
| ISO/TC 22/SC 33/WG 5 | Wheels | 轮子 | 活动 |
| ISO/TC 22/SC 33/WG 6 | Vehicle dynamics of heavy commercial vehicles and buses | 重型商用车和客车的车辆动力学 | 活动 |
| ISO/TC 22/SC 33/WG 9 | Test scenarios of automated driving systems | 自动驾驶系统的测试场景 | 活动 |
| ISO/TC 22/SC 33/WG 10 | Brake linings and friction couples | 制动器衬片和摩擦副 | 活动 |
| ISO/TC 22/SC 33/WG 11 | Simulation | 仿真度 | 活动 |
| ISO/TC 22/SC 33/WG 14 | Brake fluids | 制动液 | 活动 |
| ISO/TC 22/SC 33/WG 15 | Field load specification for brake modulation systems | 制动调节系统的现场负荷规范 | 活动 |
| ISO/TC 22/SC 33/WG 16 | 活动 Safety test equipment | 主动安全测试设备 | 活动 |
| ISO/TC 22/SC 34/WG 1 | Fuel filters | 燃油过滤器 | 活动 |
| ISO/TC 22/SC 34/WG 2 | Injection equipment | 注射设备 | 活动 |
| ISO/TC 22/SC 34/WG 3 | Air filters | 空气过滤器 | 活动 |
| ISO/TC 22/SC 34/WG 4 | Piston rings | 活塞环 | 活动 |
| ISO/TC 22/SC 34/WG 5 | Engine test code | 发动机测试代码 | 活动 |
| ISO/TC 22/SC 34/WG 6 | Water injection | 注水 | 活动 |
| ISO/TC 22/SC 34/WG 9 | Piston Pins | 活塞销轴 | 活动 |
| ISO/TC 22/SC 34/WG 11 | Separator performance, laboratory and engine test methods for crankcase ventilation systems | 曲轴箱通风系统的分离器性能、实验室和发动机测试方法 | 活动 |
| ISO/TC 22/SC 34/WG 14 | NOx reduction additive | 减少氮氧化物的添加剂 | 活动 |
| ISO/TC 22/SC 34/WG 17 | Road vehicles – Cleanliness of components | 公路车辆 - 部件的清洁度 | 活动 |
| ISO/TC 22/SC 35/WG 1 | Lighting and light-signalling | 照明和灯光信号 | 活动 |
| ISO/TC 22/SC 35/WG 2 | Safety glazing | 安全玻璃 | 活动 |
| ISO/TC 22/SC 35/WG 3 | Visibility | 可见性 | 活动 |
| ISO/TC 22/SC 36/WG 1 | Car collision test procedures | 汽车碰撞测试程序 | 活动 |
| ISO/TC 22/SC 36/WG 2 | Child restraint systems | 儿童约束系统 | 活动 |
| ISO/TC 22/SC 36/WG 3 | Instrumentation | 仪器仪表 | 活动 |
| ISO/TC 22/SC 36/WG 4 | Virtual testing | 虚拟测试 | 活动 |
| ISO/TC 22/SC 36/WG 5 | Anthropomorphic test devices | 拟人化的测试装置 | 活动 |
| ISO/TC 22/SC 36/WG 6 | Performance criteria expressed in biomechanical terms | 用生物力学术语表示的性能标准 | 活动 |
| ISO/TC 22/SC 36/WG 7 | Traffic accident analysis methodology | 交通事故分析方法 | 活动 |
| ISO/TC 22/SC 37/WG 1 | Safety aspects and terminology | 安全方面和术语 | 活动 |
| ISO/TC 22/SC 37/WG 2 | Performance and energy consumption | 性能和能源消耗 | 活动 |
| ISO/TC 22/SC 37/WG 3 | Rechargeable energy storage | 可充电的能源储存 | 活动 |
| ISO/TC 22/SC 37/WG 4 | Systems and components connected to electric propulsion systems | 与电力推进系统相连的系统和部件 | 活动 |
| ISO/TC 22/SC 37/WG 5 | Requirements for energy transfer | 能量传输的要求 | 活动 |
| ISO/TC 22/SC 37/WG 6 | Charging performance | 充电性能 | 活动 |
| ISO/TC 22/SC 38/WG 1 | Pollution and energy | 污染和能源 | 活动 |
| ISO/TC 22/SC 38/WG 2 | Electric mopeds and motorcycles | 电动轻便摩托车和摩托车 | 活动 |
| ISO/TC 22/SC 38/WG 3 | Functional safety | 功能安全 | 活动 |
| ISO/TC 22/SC 38/WG 5 | Controls | 控制措施 | 活动 |
| ISO/TC 22/SC 39/WG 3 | Controls, displays, and tell-tale localization | 控制、显示和提示性的定位 | 活动 |
| ISO/TC 22/SC 39/WG 5 | Symbols | 符号 | 活动 |
| ISO/TC 22/SC 39/WG 7 | Hand reach and R and H point determination | 手的伸长和R、H点的确定 | 活动 |
| ISO/TC 22/SC 39/WG 8 | TICS on-board-MMI | TICS-on-board-MMI | 活动 |
| ISO/TC 22/SC 40/WG 1 | Mechanical couplings | 机械联轴器 | 活动 |
| ISO/TC 22/SC 40/WG 3 | Negative pressure compartment for ambulances | 救护车的负压舱 | 活动 |
| ISO/TC 22/SC 40/WG 4 | Exterior fittings | 外部配件 | 活动 |
| ISO/TC 22/SC 41/JWG 5 | Joint ISO/TC 22/SC 41 - ISO/TC 197 WG: Fuel system components and refuelling connector for vehicles propelled by blends of natural gas and hydrogen | ISO/TC 22/SC 41 - ISO/TC 197联合工作组：以天然气和氢气混合物为动力的车辆的燃料系统部件和加注接头 | 活动 |
| ISO/TC 22/SC 41/JWG 10 | Joint ISO/TC 22/SC 41 - ISO/TC 188 WG: Alternative fuels propelled boats | ISO/TC 22/SC 41 - ISO/TC 188联合工作组：替代燃料推进的船只 | 活动 |
| ISO/TC 22/SC 41/WG 3 | Fuel system components and refuelling connector for vehicles propelled by gaseous fuel | 以气体燃料为动力的车辆的燃料系统部件和加油连接器 | 活动 |
| ISO/TC 22/SC 41/WG 4 | Fuel system components and refuelling connector for vehicles propelled by Liquefied Natural Gas (LNG) | 以液化天然气（LNG）为动力的车辆的燃料系统部件和加注连接器 | 活动 |
| ISO/TC 22/SC 41/WG 6 | Fuel system components and refuelling connector for vehicles propelled by Liquefied Petroleum Gas (LPG) | 以液化石油气（LPG）为动力的车辆的燃料系统部件和加气接头 | 活动 |
| ISO/TC 22/SC 41/WG 7 | General safety requirements for gaseous fuelled vehicles and terminology | 气体燃料车辆的一般安全要求和术语 | 活动 |
| ISO/TC 22/SC 41/WG 8 | Fuel system components and refueling connector for vehicles propelled by Dimethyl Ether (DME) | 以二甲醚（DME）为动力的车辆的燃料系统部件和加油连接器 | 活动 |
| ISO/TC 22/SC 41/WG 9 | Training, competence and conformity assessment | 培训、能力和合格评估 | 活动 |
| ISO/TC 23/WG 1 | Milking machines | 挤奶机 | 活动 |
| ISO/TC 23/SC 2/WG 10 | Revision of ISO 14982 (EMC) | ISO 14982（EMC）的修订 | 活动 |
| ISO/TC 23/SC 2/WG 11 | Enclosed agricultural cabs and environmental air quality | 封闭式农业驾驶室和环境空气质量 | 活动 |
| ISO/TC 23/SC 3/WG 14 | Environmental aspects of seeding equipment | 播种设备的环境问题 | 活动 |
| ISO/TC 23/SC 3/WG 24 | Safety of feed mixing machines (ISO 4254-19) | 饲料混合机的安全（ISO 4254-19） | 活动 |
| ISO/TC 23/SC 3/WG 25 | Robotic feed system | 机器人送料系统 | 活动 |
| ISO/TC 23/SC 4/WG 8 | Power take-off (PTO) and drawbar | 动力输出（PTO）和拉杆 | 活动 |
| ISO/TC 23/SC 4/WG 13 | Safety of Tractors | 拖拉机的安全 | 活动 |
| ISO/TC 23/SC 4/WG 14 | Revision of ISO 17567 | 对ISO 17567的修订 | 活动 |
| ISO/TC 23/SC 4/WG 15 | Front loader (ISO 4290) | 前置式装载机（ISO 4290） | 活动 |
| ISO/TC 23/SC 6/WG 5 | Portable sprayers | 便携式喷雾器 | 活动 |
| ISO/TC 23/SC 6/WG 6 | Sprayer cleaning | 喷雾器清洗 | 活动 |
| ISO/TC 23/SC 6/WG 20 | Aerial sprayers | 空中喷洒器 | 活动 |
| ISO/TC 23/SC 6/WG 21 | Methods for the laboratory measurement of spray drift - Wind tunnels | 喷雾漂移的实验室测量方法 - 风洞 | 活动 |
| ISO/TC 23/SC 6/WG 22 | Revision of ISO 4254-6 | 对ISO 4254-6的修订 | 活动 |
| ISO/TC 23/SC 6/WG 25 | Unmanned Aerial Spraying System (UASS) | 无人驾驶航空喷洒系统（UASS） | 活动 |
| ISO/TC 23/SC 6/WG 28 | Environmental requirements - Sprayers in use | 环境要求 - 使用中的喷雾器 | 活动 |
| ISO/TC 23/SC 6/WG 29 | Environmental requirements - New sprayers | 环境要求--新喷雾器 | 活动 |
| ISO/TC 23/SC 7/WG 12 | Combine harvesters, forage and cotton harvesters | 联合收割机、饲草和棉花收割机 | 活动 |
| ISO/TC 23/SC 7/WG 14 | Agricultural mowers and blades | 农业割草机和刀片 | 活动 |
| ISO/TC 23/SC 7/WG 15 | Loader wagons and forage transport wagons | 装载机车和饲草运输车 | 活动 |
| ISO/TC 23/SC 7/WG 16 | Safety of grape, olives and coffee harvesters | 葡萄、橄榄和咖啡收割机的安全问题 | 活动 |
| ISO/TC 23/SC 13/WG 2 | Snow throwers | 抛雪机 | 活动 |
| ISO/TC 23/SC 13/WG 13 | Lawnmowers | 割草机 | 活动 |
| ISO/TC 23/SC 14/WG 1 | Revision of ISO 11684:1995 | 对ISO 11684:1995的修订 | 活动 |
| ISO/TC 23/SC 14/WG 2 | Revision of ISO 3600:2015 | 对ISO 3600:2015的修订 | 活动 |
| ISO/TC 23/SC 15/JWG 4 | Joint ISO/TC 23/SC 15 - ISO/TC 127 WG: Traction assist systems/steep slope operation | ISO/TC 23/SC 15 - ISO/TC 127联合工作组：牵引力辅助系统/陡坡操作 | 活动 |
| ISO/TC 23/SC 15/WG 3 | Woody biomass reduction machinery, terminology and safety | 木质生物质还原机械、术语和安全 | 活动 |
| ISO/TC 23/SC 15/WG 6 | Study revision of ISO 11850 | 研究修订ISO 11850 | 活动 |
| ISO/TC 23/SC 15/WG 9 | Functional safety | 功能安全 | 活动 |
| ISO/TC 23/SC 17/WG 4 | Safety | 安全问题 | 活动 |
| ISO/TC 23/SC 18/WG 1 | Pressurized irrigation equipment - Definitions | 加压灌溉设备 - 定义 | 活动 |
| ISO/TC 23/SC 18/WG 3 | Irrigation sprinklers | 灌溉洒水车 | 活动 |
| ISO/TC 23/SC 18/WG 7 | Valves | 阀门 | 活动 |
| ISO/TC 23/SC 18/WG 8 | Remote monitoring and control technologies | 远程监测和控制技术 | 活动 |
| ISO/TC 23/SC 18/WG 10 | Filters | 过滤器 | 活动 |
| ISO/TC 23/SC 18/WG 13 | Implementation of pressurized irrigation systems | 实施加压灌溉系统 | 活动 |
| ISO/TC 23/SC 19/JWG 10 | Joint ISO/TC 23/SC 19/WG 10 - ISO/TC 127/SC 3: Common work between agricultural and earth moving machinery | ISO/TC 23/SC 19/WG 10 - ISO/TC 127/SC 3：农业和运土机械之间的共同工作 | 活动 |
| ISO/TC 23/SC 19/WG 1 | Applications and data interfaces | 应用和数据接口 | 活动 |
| ISO/TC 23/SC 19/WG 3 | Identification | 鉴定 | 活动 |
| ISO/TC 23/SC 19/WG 5 | Communication infrastructures | 通信基础设施 | 活动 |
| ISO/TC 23/SC 19/WG 8 | Safety and security | 安全与保障 | 活动 |
| ISO/TC 23/SC 19/WG 9 | Components and electrical systems | 组件和电气系统 | 活动 |
| ISO/TC 23/SC 19/WG 11 | Test | 测试 | 活动 |
| ISO/TC 24/SC 4/WG 1 | Representation of analysis data | 分析数据的表述 | 活动 |
| ISO/TC 24/SC 4/WG 2 | Sedimentation, classification | 沉淀、分类 | 活动 |
| ISO/TC 24/SC 4/WG 3 | Pore size distribution, porosity | 孔径分布，孔隙率 | 活动 |
| ISO/TC 24/SC 4/WG 5 | Liquid displacement methods | 液体置换方法 | 活动 |
| ISO/TC 24/SC 4/WG 6 | Laser diffraction methods | 激光衍射法 | 活动 |
| ISO/TC 24/SC 4/WG 7 | Dynamic light scattering | 动态光散射 | 活动 |
| ISO/TC 24/SC 4/WG 8 | Image analysis methods | 图像分析方法 | 活动 |
| ISO/TC 24/SC 4/WG 9 | Single particle light interaction methods | 单粒子光交互方法 | 活动 |
| ISO/TC 24/SC 4/WG 10 | Small angle X-ray scattering method | 小角度X射线散射法 | 活动 |
| ISO/TC 24/SC 4/WG 11 | Sample preparation and reference materials | 样品制备和参考材料 | 活动 |
| ISO/TC 24/SC 4/WG 12 | Electrical mobility and number concentration analysis for aerosol particles | 气溶胶颗粒的电流动性和数量浓度分析 | 活动 |
| ISO/TC 24/SC 4/WG 16 | Characterisation of particle dispersion in liquids | 颗粒在液体中分散的表征 | 活动 |
| ISO/TC 24/SC 4/WG 17 | Methods for zeta potential determination | 测定Zeta电位的方法 | 活动 |
| ISO/TC 24/SC 8/WG 1 | Test sieves and sieving | 测试筛和筛分 | 活动 |
| ISO/TC 24/SC 8/WG 2 | Industrial wire cloth | 工业用线布 | 活动 |
| ISO/TC 25/WG 16 | Materials and properties for design | 设计的材料和性能 | 活动 |
| ISO/TC 26/WG 1 | Revision of analysis method standards | 分析方法标准的修订 | 活动 |
| ISO/TC 27/SC 4/WG 7 | Manual sampling | 手动采样 | 活动 |
| ISO/TC 27/SC 5/WG 1 | Moisture, volatile matter and ash | 水分、挥发物和灰分 | 活动 |
| ISO/TC 27/SC 5/WG 2 | Carbon, hydrogen, nitrogen, oxygen and sulfur | 碳、氢、氮、氧和硫 | 活动 |
| ISO/TC 27/SC 5/WG 7 | Brown coals and lignites | 褐煤和褐煤 | 活动 |
| ISO/TC 27/SC 5/WG 8 | Major, minor and trace elements in coal and coal residues | 煤和煤渣中的主要、次要和微量元素 | 活动 |
| ISO/TC 27/SC 5/WG 9 | Guidelines for validation of methods | 方法验证的准则 | 活动 |
| ISO/TC 27/SC 5/WG 10 | Plastic properties of coal | 煤的塑料特性 | 活动 |
| ISO/TC 27/SC 5/WG 12 | Miscellaneous methods | 杂项方法 | 活动 |
| ISO/TC 27/SC 5/WG 13 | Convenor's policy manual | 召集人的政策手册 | 活动 |
| ISO/TC 27/SC 5/WG 14 | Petrographic analysis of coals | 煤炭的岩石学分析 | 活动 |
| ISO/TC 27/SC 5/WG 15 | Gasification characteristics determination of coal | 煤炭的气化特性测定 | 活动 |
| ISO/TC 28/JWG 23 | Field performance equipment for rolling bearing grease life | 用于滚动轴承润滑脂寿命的现场性能设备 | 活动 |
| ISO/TC 28/WG 2 | Determination and application of precision data in relation to methods of test | 与试验方法有关的精度数据的确定和应用 | 活动 |
| ISO/TC 28/WG 9 | Joint ISO/TC 28 - ISO/TC 35 WG: Flash point methods | ISO/TC 28 - ISO/TC 35联合工作组：闪点方法 | 活动 |
| ISO/TC 28/WG 12 | Test methods for hydraulic fluids and oils | 液压油和油的测试方法 | 活动 |
| ISO/TC 28/WG 15 | Combustion characteristics | 燃烧特性 | 活动 |
| ISO/TC 28/WG 17 | Viscosity and flow properties | 粘度和流动特性 | 活动 |
| ISO/TC 28/WG 19 | Development of test methods and field performance equipment for greases | 开发润滑脂的测试方法和现场性能设备 | 活动 |
| ISO/TC 28/WG 24 | Elemental analysis | 元素分析 | 活动 |
| ISO/TC 28/WG 25 | Hydrocarbon analysis | 碳氢化合物分析 | 活动 |
| ISO/TC 28/WG 26 | Physio-chemical and inspection tests | 生理-化学和检查测试 | 活动 |
| ISO/TC 28/WG 27 | Stability, cleanliness and compatibility | 稳定性、清洁性和兼容性 | 活动 |
| ISO/TC 28/WG 28 | Aviation fuel test methods development | 航空燃料测试方法的开发 | 活动 |
| ISO/TC 28/WG 29 | Turbine control fluids test methods development | 涡轮机控制液测试方法的开发 | 活动 |
| ISO/TC 28/SC 2/WG 4 | Metering and meter calibration | 计量和仪表校准 | 活动 |
| ISO/TC 28/SC 2/WG 5 | Calculation of petroleum quantities | 石油数量的计算 | 活动 |
| ISO/TC 28/SC 2/WG 9 | Tank calibration | 水箱校准 | 活动 |
| ISO/TC 28/SC 2/WG 10 | Tank Measurements | 水箱测量 | 活动 |
| ISO/TC 28/SC 2/WG 11 | Sampling | 抽样调查 | 活动 |
| ISO/TC 28/SC 2/WG 12 | Density determination | 密度测定 | 活动 |
| ISO/TC 28/SC 2/WG 13 | Marine bunkering | 船用燃料供应 | 活动 |
| ISO/TC 28/SC 2/WG 14 | Cargo quality assessment | 货物质量评估 | 活动 |
| ISO/TC 28/SC 4/WG 3 | Joint ISO/TC 28/SC 4 - ISO/TC 131 WG: Classification and specifications of hydraulic fluids | ISO/TC 28/SC 4 - ISO/TC 131联合工作组：液压油的分类和规格 | 活动 |
| ISO/TC 28/SC 4/WG 6 | Classification and specification of marine fuels | 船舶燃料的分类和规格 | 活动 |
| ISO/TC 28/SC 4/WG 16 | Classifications and specifications of industrial gear oils, turbine oils, compressor oils and lubricating greases | 工业齿轮油、涡轮机油、压缩机油和润滑脂的分类和规格 | 活动 |
| ISO/TC 28/SC 4/WG 17 | Specifications of liquefied natural gas for marine applications | 海上应用的液化天然气的规格 | 活动 |
| ISO/TC 28/SC 4/WG 18 | Specifications of alternative fuels for marine applications | 船舶应用的替代燃料的规格 | 活动 |
| ISO/TC 28/SC 5/WG 3 | Procedures for measurement and calculation of refrigerated fluids | 冷藏液体的测量和计算程序 | 活动 |
| ISO/TC 28/SC 5/WG 4 | Sampling of refrigerated fluids | 冷藏液体的取样 | 活动 |
| ISO/TC 28/SC 5/WG 5 | Measurement procedures of LNG and LPG on board gas carriers | 天然气船上的LNG和LPG的测量程序 | 活动 |
| ISO/TC 28/SC 5/WG 6 | Truck-to-ship (TTS) bunkering | 卡车到船(TTS)燃料供应 | 活动 |
| ISO/TC 28/SC 5/WG 7 | Ship-to-ship (STS) bunkering | 船对船（STS）燃料供应 | 活动 |
| ISO/TC 28/SC 7/WG 4 | Ethanol test methods | 乙醇测试方法 | 活动 |
| ISO/TC 29/WG 34 | Cutting tool data representation and exchange | 切削工具数据的表示和交换 | 活动 |
| ISO/TC 29/WG 37 | Joint TC 29 - TC 39/SC 10 WG: Balancing of rotating tool systems | TC 29 - TC 39/SC 10联合工作组：旋转工具系统的平衡 | 活动 |
| ISO/TC 29/SC 5/WG 3 | Coated abrasives | 涂层磨料 | 活动 |
| ISO/TC 29/SC 5/WG 5 | Bonded abrasives | 粘结磨料 | 活动 |
| ISO/TC 29/SC 5/WG 7 | Grain characteristics | 谷物特性 | 活动 |
| ISO/TC 29/SC 5/WG 8 | Grain characteristics and grain sizes of diamond or cubic boron nitride | 钻石或立方氮化硼的晶粒特征和晶粒尺寸 | 活动 |
| ISO/TC 29/SC 5/WG 9 | Superabrasives | 超硬材料 | 活动 |
| ISO/TC 29/SC 8/WG 2 | Tools for pressing | 用于压制的工具 | 活动 |
| ISO/TC 30/SC 2/WG 11 | Revision of ISO 5167 and associated technical reports | 修订ISO 5167和相关技术报告 | 活动 |
| ISO/TC 30/SC 5/WG 7 | Tracer methods | 示踪方法 | 活动 |
| ISO/TC 30/SC 5/WG 8 | Pitot tubes | 皮托管 | 活动 |
| ISO/TC 30/SC 7/WG 9 | Revision of ISO 4064 | 对ISO 4064的修订 | 活动 |
| ISO/TC 31/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 31/WG 6 | Rolling resistance (highway tyres) | 滚动阻力（公路轮胎） | 活动 |
| ISO/TC 31/WG 8 | Methods for measuring snow and ice grip performance | 测量冰雪抓地性能的方法 | 活动 |
| ISO/TC 31/WG 9 | Pneumatic tubes and flaps for automobile vehicles | 用于汽车的气动管和挡板 | 活动 |
| ISO/TC 31/WG 10 | RFID tyre tags | RFID轮胎标签 | 活动 |
| ISO/TC 31/WG 11 | Tyre noise test methods | 轮胎噪音测试方法 | 活动 |
| ISO/TC 31/WG 12 | Methods for measuring relative wet grip performance | 测量相对湿地抓地性能的方法 | 活动 |
| ISO/TC 31/WG 13 | Tyre abrasion measurement | 轮胎磨损测量 | 活动 |
| ISO/TC 31/SC 3/WG 15 | Relationship between load/pressure and other parameters | 负荷/压力和其他参数之间的关系 | 活动 |
| ISO/TC 31/SC 3/WG 22 | Artificially worn tyres | 人为磨损的轮胎 | 活动 |
| ISO/TC 31/SC 6/WG 10 | Consistency of document ISO 4250-1/-2 and -3 | ISO 4250-1/-2和-3号文件的连贯性 | 活动 |
| ISO/TC 31/SC 6/WG 11 | Revision of ISO 10571 - Tyres for mobile cranes and similar specialized machines | ISO 10571的修订--移动式起重机和类似专用机器的轮胎 | 活动 |
| ISO/TC 31/SC 7/WG 4 | Tyres for rim diameter code larger than 15 | 轮辋直径代码大于15的轮胎 | 活动 |
| ISO/TC 31/SC 7/WG 6 | Cylindrical and conical base rubber solid tyres | 圆柱形和锥形底座的橡胶实心轮胎 | 活动 |
| ISO/TC 31/SC 10/WG 16 | Tyre designations and dimensions for Bicycle tyres and rims | 自行车轮胎和轮辋的轮胎名称和尺寸 | 活动 |
| ISO/TC 33/WG 17 | Chemical analysis | 化学分析 | 活动 |
| ISO/TC 33/WG 25 | Refractory test piece preparation – Gunning techniques | 耐火材料试件的准备 - 炮制技术 | 活动 |
| ISO/TC 33/WG 27 | Refractory mortars – Determination of permanent change in dimension on heating | 耐火砂浆--加热时尺寸永久变化的确定 | 活动 |
| ISO/TC 33/WG 31 | Phase quantitative analysis of residual quartz in silica bricks | 硅砖中残留石英的相位定量分析 | 活动 |
| ISO/TC 34/WG 14 | Vitamins, carotenoids and other nutrients | 维生素、类胡萝卜素和其他营养物质 | 活动 |
| ISO/TC 34/WG 20 | Aflatoxins | 黄曲霉毒素 | 活动 |
| ISO/TC 34/WG 21 | Social responsibility/sustainability | 社会责任/可持续发展 | 活动 |
| ISO/TC 34/WG 24 | qNMR (Quantitative nuclear magnetic resonance spectroscopy) | qNMR（定量核磁共振谱） | 活动 |
| ISO/TC 34/WG 25 | Food security in emergency or crisis situation | 紧急情况或危机情况下的食物保障 | 活动 |
| ISO/TC 34/WG 26 | Plant-based foods | 植物性食品 | 活动 |
| ISO/TC 34/WG 27 | Professional farmer organization | 职业农民组织 | 活动 |
| ISO/TC 34/SC 2/JWG 1 | Nomenclature | 命名法 | 活动 |
| ISO/TC 34/SC 2/WG 2 | Revision of ISO 542 Oilseeds - Sampling | 修订ISO 542《油菜籽--采样》 | 活动 |
| ISO/TC 34/SC 4/WG 3 | Nomenclature and vocabulary | 命名法和词汇 | 活动 |
| ISO/TC 34/SC 4/WG 4 | Amylose in rice | 大米中的直链淀粉 | 活动 |
| ISO/TC 34/SC 4/WG 6 | Pulses | 脉冲 | 活动 |
| ISO/TC 34/SC 4/WG 8 | Mycotoxin | 霉菌毒素 | 活动 |
| ISO/TC 34/SC 4/WG 9 | Determination of moisture content | 测定水分含量 | 活动 |
| ISO/TC 34/SC 4/WG 10 | Whole grain | 全谷物 | 活动 |
| ISO/TC 34/SC 6/WG 19 | Nomenclature and vocabulary | 命名法和词汇 | 活动 |
| ISO/TC 34/SC 6/WG 20 | Operating procedures of slaughtering | 屠宰的操作程序 | 活动 |
| ISO/TC 34/SC 6/WG 21 | Fermented meat products | 发酵肉制品 | 活动 |
| ISO/TC 34/SC 6/WG 23 | Determination of additives | 添加剂的测定 | 活动 |
| ISO/TC 34/SC 6/WG 24 | Determination of pollutant | 污染物的测定 | 活动 |
| ISO/TC 34/SC 6/WG 26 | Determination of essential composition and quality factors | 基本成分和质量因素的确定 | 活动 |
| ISO/TC 34/SC 6/WG 27 | Quick-frozen coated aquatic products | 速冻涂层水产品 | 活动 |
| ISO/TC 34/SC 7/WG 7 | Zanthoxyli Pericarpium | 黄酮类药物（Zanthoxyli Pericarpium | 活动 |
| ISO/TC 34/SC 8/WG 6 | Tea classification | 茶叶分类 | 活动 |
| ISO/TC 34/SC 8/WG 7 | Oolong tea | 乌龙茶 | 活动 |
| ISO/TC 34/SC 8/WG 10 | Green tea - Vocabulary | 绿茶 - 词汇 | 活动 |
| ISO/TC 34/SC 8/WG 11 | Purple tea | 紫茶 | 活动 |
| ISO/TC 34/SC 8/WG 13 | Matcha tea | 抹茶 | 活动 |
| ISO/TC 34/SC 8/WG 14 | Tea polyphenols | 茶多酚 | 活动 |
| ISO/TC 34/SC 8/WG 15 | Theanine | 茶氨酸 | 活动 |
| ISO/TC 34/SC 9/WG 2 | Statistics | 统计数据 | 活动 |
| ISO/TC 34/SC 9/WG 3 | Method validation | 方法验证 | 活动 |
| ISO/TC 34/SC 9/WG 5 | Food microbiology - Culture media (JWG between ISO/TC 34/SC 9 and ISO/TC 147/SC 4) | 食品微生物学 - 培养基（ISO/TC 34/SC 9和ISO/TC 147/SC 4之间的联合工作组） | 活动 |
| ISO/TC 34/SC 9/WG 6 | Food-borne parasites | 食源性寄生虫 | 活动 |
| ISO/TC 34/SC 9/WG 7 | General requirements and guidance for microbiological examinations | 微生物检查的一般要求和指南 | 活动 |
| ISO/TC 34/SC 9/WG 8 | Preparation of test samples, initial suspension and decimal dilutions | 测试样品的制备，初始悬浮液和十进制稀释液的制备 | 活动 |
| ISO/TC 34/SC 9/WG 9 | Detection of Salmonella | 检测沙门氏菌 | 活动 |
| ISO/TC 34/SC 9/WG 10 | Typing of Salmonella | 沙门氏菌的分型 | 活动 |
| ISO/TC 34/SC 9/WG 11 | Food and feed cultures | 食品和饲料文化 | 活动 |
| ISO/TC 34/SC 9/WG 12 | Alicyclobacillus | 阿利卡巴氏杆菌 | 活动 |
| ISO/TC 34/SC 9/WG 13 | Coagulase positive staphylococci | 凝固酶阳性葡萄球菌 | 活动 |
| ISO/TC 34/SC 9/WG 16 | Yeasts and moulds | 酵母菌和霉菌 | 活动 |
| ISO/TC 34/SC 9/WG 18 | Detection and enumeration of Escherichia coli | 大肠杆菌的检测和计数 | 活动 |
| ISO/TC 34/SC 9/WG 19 | Guidelines for conducting challenge tests | 进行挑战试验的准则 | 活动 |
| ISO/TC 34/SC 9/WG 20 | Enumeration and confirmation of Bacillus cereus group bacteria | 蜡样芽孢杆菌组细菌的计数和确认 | 活动 |
| ISO/TC 34/SC 9/WG 21 | Enumeration of Enterococci | 肠球菌的计数 | 活动 |
| ISO/TC 34/SC 9/WG 23 | Sulfite reducing clostridia and C. perfringens | 亚硫酸还原梭菌和产气荚膜梭菌 | 活动 |
| ISO/TC 34/SC 9/WG 26 | Detection of Clostridium botulinum toxins | 检测肉毒杆菌的毒素 | 活动 |
| ISO/TC 34/SC 9/WG 27 | Vibrios | 维布里奥斯 | 活动 |
| ISO/TC 34/SC 9/WG 28 | Enumeration of micro-organisms at 30 degrees C | 30摄氏度下的微生物计数 | 活动 |
| ISO/TC 34/SC 9/WG 29 | Enumeration of spores | 孢子的计数 | 活动 |
| ISO/TC 34/SC 9/WG 30 | Qualitative determination of staphylococcal enterotoxins | 葡萄球菌肠毒素的定性测定 | 活动 |
| ISO/TC 34/SC 9/WG 31 | Hepatitis E Virus | 戊型肝炎病毒 | 活动 |
| ISO/TC 34/SC 9/WG 32 | Improvement of pre-enrichment step in ISO 11290-1 | 改进ISO 11290-1中的预富集步骤 | 活动 |
| ISO/TC 34/SC 9/WG 34 | Enterobacteriaceae | 肠杆菌科 | 活动 |
| ISO/TC 34/SC 9/WG 35 | Sampling techniques | 采样技术 | 活动 |
| ISO/TC 34/SC 9/WG 36 | General requirements relating to LAMP-based methods | 与基于LAMP的方法有关的一般要求 | 活动 |
| ISO/TC 34/SC 10/WG 11 | Feed grade maize | 饲料级玉米 | 活动 |
| ISO/TC 34/SC 10/WG 12 | Phytase activity | 植酸酶活性 | 活动 |
| ISO/TC 34/SC 10/WG 13 | Fish meal | 鱼粉 | 活动 |
| ISO/TC 34/SC 11/JWG 1 | Joint ISO/TC 34/SC 11 - ISO/TC 34/SC 5 WG: Fatty acids at the sn-2 position of triacylglycerol molecules — Enzymatic transesterification method | ISO/TC 34/SC 11-ISO/TC 34/SC 5联合工作组：三酰甘油分子Sn-2位置的脂肪酸--酶法转酯化法 | 活动 |
| ISO/TC 34/SC 12/WG 2 | Panel selection, training and monitoring | 小组选择、培训和监测 | 活动 |
| ISO/TC 34/SC 12/WG 3 | Perception Tests | 感知测试 | 活动 |
| ISO/TC 34/SC 15/WG 21 | Olfactory and visual examination | 嗅觉和视觉检查 | 活动 |
| ISO/TC 34/SC 15/WG 22 | Determination of loss in mass" | 质量损失的确定" | 活动 |
| ISO/TC 34/SC 15/WG 23 | Methods of specification | 规范的方法 | 活动 |
| ISO/TC 34/SC 15/WG 24 | Vocabulary | 词汇 | 活动 |
| ISO/TC 34/SC 16/JWG 11 | Joint ISO/TC 34/SC 16 - ISO/TC 276 WG: Biobanking for agriculture and food production | ISO/TC 34/SC 16 - ISO/TC 276联合工作组：农业和食品生产的生物库 | 活动 |
| ISO/TC 34/SC 16/JWG 12 | Joint ISO/TC 34/SC 16 - ISO/TC 38 WG: Molecular biomarkers of agricultural fibers | ISO/TC 34/SC 16 - ISO/TC 38联合工作组：农业纤维的分子生物标志物 | 活动 |
| ISO/TC 34/SC 16/WG 8 | Meat speciation | 肉类标本化 | 活动 |
| ISO/TC 34/SC 16/WG 9 | Subsampling of seeds and grains | 种子和谷物的取样 | 活动 |
| ISO/TC 34/SC 16/WG 10 | Rapid nucleic acid amplification methods | 快速核酸扩增方法 | 活动 |
| ISO/TC 34/SC 16/WG 13 | Microarray detection | 微阵列检测 | 活动 |
| ISO/TC 34/SC 16/WG 14 | Genetically engineered content detection and quantification | 基因工程内容的检测和量化 | 活动 |
| ISO/TC 34/SC 16/WG 15 | Single laboratory validation of qualitative real time PCR | 定性实时PCR的单一实验室验证 | 活动 |
| ISO/TC 34/SC 17/WG 11 | Prerequisite programmes on food safety | 食品安全的先决条件方案 | 活动 |
| ISO/TC 34/SC 19/WG 1 | Honey | 蜂蜜 | 活动 |
| ISO/TC 34/SC 19/WG 2 | Propolis | 蜂胶 | 活动 |
| ISO/TC 34/SC 19/WG 3 | Bee pollen | 蜂花粉 | 活动 |
| ISO/TC 34/SC 19/WG 4 | Royal jelly | 蜂王浆 | 活动 |
| ISO/TC 34/SC 20/WG 1 | Management systems for minimization of food loss and waste | 尽量减少食物损失和浪费的管理系统 | 活动 |
| ISO/TC 35/JWG 6 | Joint ISO/TC 35 - ISO/TC 67 WG: Competency requirements of coating inspectors and applicators | ISO/TC 35 - ISO/TC 67联合工作组：涂层检查员和涂抹员的能力要求 | 活动 |
| ISO/TC 35/WG 4 | Binders for paints and varnishes | 涂料和清漆的粘结剂 | 活动 |
| ISO/TC 35/WG 5 | Naval stores | 海军仓库 | 活动 |
| ISO/TC 35/SC 9/WG 16 | Coating powders | 涂料粉末 | 活动 |
| ISO/TC 35/SC 9/WG 29 | Electrochemical methods | 电化学方法 | 活动 |
| ISO/TC 35/SC 9/WG 30 | Properties prior to and during application and drying | 在应用和干燥之前和期间的特性 | 活动 |
| ISO/TC 35/SC 9/WG 31 | Properties after application | 应用后的特性 | 活动 |
| ISO/TC 35/SC 9/WG 32 | Coating materials for wind-turbine rotor blades | 用于风力涡轮机转子叶片的涂层材料 | 活动 |
| ISO/TC 35/SC 12/WG 2 | Surface cleanliness | 表面清洁度 | 活动 |
| ISO/TC 35/SC 12/WG 3 | Surface preparation methods | 表面处理方法 | 活动 |
| ISO/TC 35/SC 12/WG 4 | Blast-cleaning abrasives | 抛丸清理磨料 | 活动 |
| ISO/TC 35/SC 14/WG 12 | Corrosion protection of steel structures by protective paint systems and laboratory performance test methods | 通过保护性油漆系统和实验室性能测试方法对钢结构进行腐蚀保护 | 活动 |
| ISO/TC 35/SC 14/WG 13 | Field assessment of corrosion protection of steel structures by protective paint systems | 保护性油漆系统对钢结构腐蚀保护的现场评估 | 活动 |
| ISO/TC 35/SC 15/WG 1 | Protective coatings for concrete structures | 混凝土结构的保护性涂层 | 活动 |
| ISO/TC 35/SC 16/WG 1 | Volatile and semi-volatile organic compounds | 挥发性和半挥发性有机化合物 | 活动 |
| ISO/TC 35/SC 16/WG 2 | Determination of in-can preservatives | 罐内防腐剂的测定 | 活动 |
| ISO/TC 36/WG 1 | Production technology | 生产技术 | 活动 |
| ISO/TC 36/WG 2 | Laboratory and distribution services technology | 实验室和分销服务技术 | 活动 |
| ISO/TC 36/WG 3 | Audio technology | 音频技术 | 活动 |
| ISO/TC 36/WG 4 | Presentation technology | 演示技术 | 活动 |
| ISO/TC 37/WG 10 | Technical communication | 技术交流 | 活动 |
| ISO/TC 37/WG 11 | Plain language | 平实的语言 | 活动 |
| ISO/TC 37/WG 12 | Translation-oriented writing | 面向翻译的写作 | 活动 |
| ISO/TC 37/SC 1/WG 3 | Principles, methods and vocabulary | 原则、方法和词汇 | 活动 |
| ISO/TC 37/SC 1/WG 4 | Socioterminology | 社会术语学 | 活动 |
| ISO/TC 37/SC 1/WG 5 | Concept modelling in terminology work | 术语工作中的概念建模 | 活动 |
| ISO/TC 37/SC 2/JWG 7 | Joint ISO/TC 37/SC 2 - ISO/TC 46/SC 4 WG: Revision of ISO 639 | ISO/TC 37/SC 2-ISO/TC 46/SC 4联合工作组：ISO 639的修订工作 | 活动 |
| ISO/TC 37/SC 2/WG 1 | Language varieties | 语言种类 | 活动 |
| ISO/TC 37/SC 2/WG 2 | Terminography | 术语学 | 活动 |
| ISO/TC 37/SC 2/WG 8 | Alphabetical ordering, revision | 按字母顺序排列，修订 | 活动 |
| ISO/TC 37/SC 2/WG 9 | Presentation/representation of entries in dictionaries, revision | 词典中词条的表述/代表，修订 | 活动 |
| ISO/TC 37/SC 3/WG 1 | Data categories | 数据类别 | 活动 |
| ISO/TC 37/SC 3/WG 3 | Data interchange | 数据交换 | 活动 |
| ISO/TC 37/SC 3/WG 4 | Database management | 数据库管理 | 活动 |
| ISO/TC 37/SC 3/WG 5 | Terminology extraction | 术语提取 | 活动 |
| ISO/TC 37/SC 4/WG 1 | Basic descriptors and mechanisms for language resources | 语言资源的基本描述符和机制 | 活动 |
| ISO/TC 37/SC 4/WG 2 | Semantic annotation | 语义学注释 | 活动 |
| ISO/TC 37/SC 4/WG 4 | Lexical resources | 词汇资源 | 活动 |
| ISO/TC 37/SC 4/WG 5 | Workflow of language resource management | 语言资源管理的工作流程 | 活动 |
| ISO/TC 37/SC 4/WG 6 | Linguistic annotation | 语言学注释 | 活动 |
| ISO/TC 37/SC 5/WG 1 | Translation | 翻译 | 活动 |
| ISO/TC 37/SC 5/WG 2 | Interpreting | 口译 | 活动 |
| ISO/TC 37/SC 5/WG 3 | Facilities and equipment for interpreting services | 口译服务的设施和设备 | 活动 |
| ISO/TC 37/SC 5/WG 4 | Interpreting and translation teaching and training programs | 口译和笔译教学和培训计划 | 活动 |
| ISO/TC 38/WG 9 | Nonwovens | 非织造布 | 活动 |
| ISO/TC 38/WG 17 | Physiological properties of textiles | 纺织品的生理特性 | 活动 |
| ISO/TC 38/WG 21 | Ropes, cordage, slings and netting | 绳索、线绳、吊索和网兜 | 活动 |
| ISO/TC 38/WG 22 | Composition and chemical testing | 组成和化学测试 | 活动 |
| ISO/TC 38/WG 23 | Biological properties of textiles | 纺织品的生物特性 | 活动 |
| ISO/TC 38/WG 27 | Fabric properties relating to moisture | 与湿度有关的织物特性 | 活动 |
| ISO/TC 38/WG 29 | Testing methods for textile products against noxious pests | 纺织产品对有毒害虫的测试方法 | 活动 |
| ISO/TC 38/WG 30 | Tests for Biodegradability | 生物降解性测试 | 活动 |
| ISO/TC 38/WG 31 | Natural material for textiles | 纺织品的天然材料 | 活动 |
| ISO/TC 38/WG 32 | Smart textiles | 智能纺织品 | 活动 |
| ISO/TC 38/WG 33 | Animal welfare in the textile supply chain | 纺织品供应链中的动物福利 | 活动 |
| ISO/TC 38/WG 34 | Microplastics from textile sources | 纺织品来源的微塑料 | 活动 |
| ISO/TC 38/WG 35 | Environmental aspects | 环境方面 | 活动 |
| ISO/TC 38/SC 1/WG 1 | Light and weathering | 光线和风化 | 活动 |
| ISO/TC 38/SC 1/WG 2 | Washing | 洗涤 | 活动 |
| ISO/TC 38/SC 1/WG 5 | Adjacent fabrics | 相邻的织物 | 活动 |
| ISO/TC 38/SC 1/WG 13 | Miscellaneous technical projects | 杂项技术项目 | 活动 |
| ISO/TC 38/SC 2/WG 3 | Domestic washing and drying | 家庭洗涤和干燥 | 活动 |
| ISO/TC 38/SC 2/WG 4 | Appearance retention | 外观保持 | 活动 |
| ISO/TC 38/SC 2/WG 8 | Water resistance tests | 耐水性测试 | 活动 |
| ISO/TC 38/SC 2/WG 9 | Industrial laundering | 工业洗涤 | 活动 |
| ISO/TC 38/SC 2/WG 12 | Care labelling | 护理标签 | 活动 |
| ISO/TC 38/SC 23/WG 2 | Fibres - Natural cellulosic | 纤维 - 天然纤维素 | 活动 |
| ISO/TC 38/SC 23/WG 5 | Fibres - Natural proteins | 纤维 - 天然蛋白质 | 活动 |
| ISO/TC 38/SC 23/WG 6 | Fibres - Man-made | 纤维 - 人造 | 活动 |
| ISO/TC 38/SC 24/WG 2 | Fabrics - Physical Tests | 面料 - 物理测试 | 活动 |
| ISO/TC 38/SC 24/WG 5 | Digital measurement of fabric appearance | 织物外观的数字测量 | 活动 |
| ISO/TC 39/JWG 7 | Revision of ISO 3408 series "Ball screws" – Part 1 thru Part 5 | 修订ISO 3408系列 "滚珠丝杠" - 第1至第5部分 | 活动 |
| ISO/TC 39/WG 12 | Environmental evaluation of machine tools | 机械工具的环境评价 | 活动 |
| ISO/TC 39/SC 4/WG 1 | Common requirements and safety of integrated fed machines | 集成式喂食机的共同要求和安全 | 活动 |
| ISO/TC 39/SC 4/WG 2 | Safety of manually fed machines | 人工喂养机器的安全性 | 活动 |
| ISO/TC 39/SC 6/WG 2 | Metalcutting machine tools | 金属切削机床 | 活动 |
| ISO/TC 39/SC 10/WG 1 | Metal forming machines | 金属成形机 | 活动 |
| ISO/TC 39/SC 10/WG 2 | Grinding machines | 磨床 | 活动 |
| ISO/TC 39/SC 10/WG 3 | Turning machines | 车削机 | 活动 |
| ISO/TC 39/SC 10/WG 4 | Machining centres | 加工中心 | 活动 |
| ISO/TC 39/SC 10/WG 5 | Electro discharge machines | 电火花机 | 活动 |
| ISO/TC 39/SC 10/WG 6 | Sawing machines | 锯木机 | 活动 |
| ISO/TC 39/SC 10/WG 7 | Rotating high speed cutting tools | 旋转的高速切削工具 | 活动 |
| ISO/TC 42/JWG 20 | Joint ISO/TC 42-IEC WG : Digital still cameras | ISO/TC 42-IEC联合工作组：数码静止相机 | 活动 |
| ISO/TC 42/JWG 24 | Joint ISO/TC 42 - ISO/TC 130 WG: Revision of ISO 3664 | ISO/TC 42 - ISO/TC 130联合工作组：修订ISO 3664 | 活动 |
| ISO/TC 42/JWG 26 | Joint ISO/TC 42-TC 46/SC 11-TC 171 WG: Imaging system capability qualification for archival recording and approval | ISO/TC 42-TC 46/SC 11-TC 171联合工作组：档案记录的成像系统能力鉴定和批准 | 活动 |
| ISO/TC 42/JWG 27 | Joint ISO/TC 42 - JTC1/SC 28 - ISO/TC 130 WG: Image permanence & durability test methods and specifications for digital prints in commercial applications | ISO/TC 42 - JTC1/SC 28 - ISO/TC 130联合工作组：商业应用中数字印刷品的图像持久性和耐久性测试方法和规范 | 活动 |
| ISO/TC 42/WG 3 | Image measurement, viewing and sensitometry | 图像测量、观察和感光度测量 | 活动 |
| ISO/TC 42/WG 5 | Physical properties and image permanence of photographic materials | 摄影材料的物理特性和图像的持久性 | 活动 |
| ISO/TC 42/WG 8 | Joint ISO/TC 42 - ISO/TC 6 WG: Imaging materials - Dimensions | ISO/TC42-ISO/TC6联合工作组：成像材料-尺寸 | 活动 |
| ISO/TC 42/WG 18 | Electronic still picture imaging | 电子静止图像成像 | 活动 |
| ISO/TC 42/WG 23 | Joint ISO/TC 42 - ISO/TC 130 - CIE WG: Extended colour encodings for digital image storage, manipulation and interchange | ISO/TC 42-ISO/TC 130-CIE联合工作组：用于数字图像存储、操作和交换的扩展颜色编码 | 活动 |
| ISO/TC 43/WG 1 | Threshold of hearing | 听力阈值 | 活动 |
| ISO/TC 43/WG 9 | Method for calculating loudness level | 计算响度等级的方法 | 活动 |
| ISO/TC 43/WG 10 | Hearing aid fitting management | 助听器验配管理 | 活动 |
| ISO/TC 43/SC 1/JWG 1 | Joint ISO/TC 43/SC 1 - IEC/TC 29 WG: Determination of high frequency sound pressure levels emitted by high intensity ultrasonic equipment | ISO/TC 43/SC 1-IEC/TC 29联合工作组：高强度超声波设备发出的高频声压级的确定 | 活动 |
| ISO/TC 43/SC 1/WG 17 | Methods of measurement of sound attenuation of hearing protectors | 听力保护器的声音衰减的测量方法 | 活动 |
| ISO/TC 43/SC 1/WG 23 | Measurement of noise from information technology, business and telecommunications equipment | 信息技术、商业和电信设备的噪声测量 | 活动 |
| ISO/TC 43/SC 1/WG 27 | Joint ISO/TC 43/SC 1 - ISO/TC 22 WG: Effect of temperature on tyre/road noise testing | ISO/TC 43/SC 1 - ISO/TC 22联合工作组：温度对轮胎/道路噪声测试的影响 | 活动 |
| ISO/TC 43/SC 1/WG 28 | Basic machinery noise emission standards | 基本机械噪声排放标准 | 活动 |
| ISO/TC 43/SC 1/WG 33 | Measuring method for comparing traffic noise on different road surfaces | 比较不同路面的交通噪声的测量方法 | 活动 |
| ISO/TC 43/SC 1/WG 39 | Characterization of pavement texture using surface profiles | 利用表面轮廓对路面纹理进行表征 | 活动 |
| ISO/TC 43/SC 1/WG 42 | Joint ISO/TC 43/SC 1 - ISO/TC 22 WG: Measurement of noise emission (external) from road vehicles | ISO/TC43/SC1-ISO/TC22联合工作组：道路车辆噪声排放（外部）的测量 | 活动 |
| ISO/TC 43/SC 1/WG 45 | Description and measurement of environmental noise (Revision of ISO 1996-series) | 环境噪声的描述和测量（ISO1996系列的修订版） | 活动 |
| ISO/TC 43/SC 1/WG 51 | Noise from shooting ranges | 射击场的噪音 | 活动 |
| ISO/TC 43/SC 1/WG 54 | Perceptual assessment of soundscape quality | 对声景质量的感性评估 | 活动 |
| ISO/TC 43/SC 1/WG 57 | Joint ISO/TC 43/SC 1 - ISO/TC 22 WG: In-situ measurements of blocked forces | ISO/TC 43/SC 1 - ISO/TC 22联合工作组：堵截力的原位测量 | 活动 |
| ISO/TC 43/SC 1/WG 58 | Revision of ISO 5135 - Sound power levels of air-terminal devices | 对ISO 5135的修订--空气终端设备的声功率水平 | 活动 |
| ISO/TC 43/SC 1/WG 61 | Revision of ISO 9613-2 - Attenuation of sound during propagation outdoors | 对ISO 9613-2的修订--声音在室外传播时的衰减情况 | 活动 |
| ISO/TC 43/SC 1/WG 64 | Revision of ISO 7574 (all parts) — Statistical methods for determining and verifying stated noise emission values of machinery and equipment | 对ISO 7574（所有部分）的修订--用于确定和验证机械和设备的声明噪声排放值的统计方法 | 活动 |
| ISO/TC 43/SC 1/WG 65 | Acoustic quality of open office spaces | 开放式办公空间的声学质量 | 活动 |
| ISO/TC 43/SC 1/WG 66 | Revision of ISO 15665 Acoustic insulation of pipes, valves and flanges | ISO 15665《管道、阀门和法兰的隔声》修订版 | 活动 |
| ISO/TC 43/SC 1/WG 67 | Revision of ISO 9612 – Determination of occupational noise exposure | 对ISO 9612的修订--职业性噪声暴露的确定 | 活动 |
| ISO/TC 43/SC 1/WG 68 | Non-acoustic factors | 非声学因素 | 活动 |
| ISO/TC 43/SC 1/WG 69 | Revision of ISO 15664 - Noise control design procedures for open plant | ISO 15664的修订 - 开放式工厂的噪音控制设计程序 | 活动 |
| ISO/TC 43/SC 2/WG 18 | Measurement of sound insulation in buildings and of building elements | 建筑物和建筑构件的隔声测量 | 活动 |
| ISO/TC 43/SC 2/WG 27 | Indoor acoustic environment | 室内声学环境 | 活动 |
| ISO/TC 43/SC 2/WG 29 | Acoustic classification scheme for buildings | 建筑物的声学分类方案 | 活动 |
| ISO/TC 43/SC 2/WG 32 | Determination of acoustical parameters of materials | 材料的声学参数的确定 | 活动 |
| ISO/TC 43/SC 2/WG 33 | Acoustic quality criteria for music rehearsal rooms and spaces | 音乐排练室和空间的声学质量标准 | 活动 |
| ISO/TC 43/SC 2/WG 34 | Revision of ISO 3382-3 | ISO3382-3的修订 | 活动 |
| ISO/TC 43/SC 2/WG 35 | Sound absorption | 吸音 | 活动 |
| ISO/TC 43/SC 2/WG 36 | Room Acoustics | 房间声学 | 活动 |
| ISO/TC 43/SC 3/WG 1 | Measurement of underwater sound from ships | 测量来自船舶的水下声音 | 活动 |
| ISO/TC 43/SC 3/WG 2 | Underwater acoustical terminology | 水下声学术语 | 活动 |
| ISO/TC 43/SC 3/WG 3 | Measurement of radiated noise from marine pile driving | 测量海洋打桩的辐射噪声 | 活动 |
| ISO/TC 43/SC 3/WG 4 | Standard-target method of calibrating 活动 sonars | 校准有源声呐的标准目标法 | 活动 |
| ISO/TC 43/SC 3/WG 5 | Measurement and modelling of underwater ambient sound | 水下环境声的测量和建模 | 活动 |
| ISO/TC 44/WG 5 | Welding simulation | 焊接模拟 | 活动 |
| ISO/TC 44/SC 3/WG 2 | Classification of underwater welding electrodes - joint with TC 44/SC 15 | 水下焊接电极的分类--与TC 44/SC 15的联合 | 活动 |
| ISO/TC 44/SC 5/WG 1 | Radiographic testing of welds | 焊缝的射线检测 | 活动 |
| ISO/TC 44/SC 5/WG 2 | Ultrasonic testing of welds | 焊缝的超声波测试 | 活动 |
| ISO/TC 44/SC 6/WG 3 | Quality management and testing | 质量管理和测试 | 活动 |
| ISO/TC 44/SC 7/WG 2 | Nomenclature of processes and reference numbers | 过程的命名和参考号 | 活动 |
| ISO/TC 44/SC 8/WG 6 | Quality classification and dimensional tolerances of thermally cut surfaces | 热切割表面的质量分类和尺寸公差 | 活动 |
| ISO/TC 44/SC 8/WG 8 | Pressure regulators | 压力调节器 | 活动 |
| ISO/TC 44/SC 9/WG 2 | Sampling of airborne particles and gases in the operator's breathing zone | 对操作员呼吸区的空气颗粒和气体进行采样 | 活动 |
| ISO/TC 44/SC 9/WG 7 | Materials and products for protection against heat and radiation | 防热和防辐射的材料和产品 | 活动 |
| ISO/TC 44/SC 10/WG 1 | Quality levels for imperfections in welded joints (Revision of ISO 5817 and ISO 10042) | 焊接接头缺陷的质量等级（ISO 5817和ISO 10042的修订版） | 活动 |
| ISO/TC 44/SC 10/WG 5 | Specification and qualification of welding procedures for metallic materials | 金属材料的焊接程序的规范和鉴定 | 活动 |
| ISO/TC 44/SC 10/WG 6 | Stud welding | 螺栓焊接 | 活动 |
| ISO/TC 44/SC 10/WG 8 | Heat treatment | 热处理 | 活动 |
| ISO/TC 44/SC 10/WG 12 | Welding energies | 焊接能量 | 活动 |
| ISO/TC 44/SC 10/WG 14 | Revision of ISO 17662 | 对ISO 17662的修订 | 活动 |
| ISO/TC 44/SC 10/WG 15 | Recommendations for welding of unalloyed and low alloyed steel castings | 非合金钢和低合金钢铸件焊接的建议 | 活动 |
| ISO/TC 44/SC 11/WG 3 | Brazing qualification | 钎焊资格 | 活动 |
| ISO/TC 44/SC 11/WG 4 | Welder qualification | 焊工资格 | 活动 |
| ISO/TC 44/SC 11/WG 5 | Revision of ISO 14732 | 对ISO 14732的修订 | 活动 |
| ISO/TC 45/WG 10 | Terminology | 术语 | 活动 |
| ISO/TC 45/WG 16 | Environmental aspects and sustainability | 环境方面和可持续性 | 活动 |
| ISO/TC 45/SC 1/WG 1 | Industrial, chemical and oil hoses | 工业、化学和油管 | 活动 |
| ISO/TC 45/SC 1/WG 2 | Automotive hoses | 汽车胶管 | 活动 |
| ISO/TC 45/SC 1/WG 3 | Hydraulic hoses | 液压软管 | 活动 |
| ISO/TC 45/SC 1/WG 4 | Hose test methods | 软管测试方法 | 活动 |
| ISO/TC 45/SC 2/WG 1 | Physical properties | 物理特性 | 活动 |
| ISO/TC 45/SC 2/WG 2 | Visco-elastic properties | 粘弹性能 | 活动 |
| ISO/TC 45/SC 2/WG 3 | Degradation tests | 降解测试 | 活动 |
| ISO/TC 45/SC 2/WG 4 | Application of statistical methods | 统计方法的应用 | 活动 |
| ISO/TC 45/SC 2/WG 5 | Chemical tests | 化学测试 | 活动 |
| ISO/TC 45/SC 3/WG 2 | Latex | 乳胶 | 活动 |
| ISO/TC 45/SC 3/WG 3 | Carbon black, silica and rubber chemicals | 碳黑、硅石和橡胶化学品 | 活动 |
| ISO/TC 45/SC 3/WG 4 | Natural rubber | 天然橡胶 | 活动 |
| ISO/TC 45/SC 3/WG 5 | Synthetic and reclaimed rubber | 合成和再生橡胶 | 活动 |
| ISO/TC 45/SC 4/WG 2 | Rubber seals | 橡胶密封件 | 活动 |
| ISO/TC 45/SC 4/WG 5 | Gloves and other latex products | 手套和其他乳胶制品 | 活动 |
| ISO/TC 45/SC 4/WG 7 | Material specification | 材料规格 | 活动 |
| ISO/TC 45/SC 4/WG 8 | Flexible and semi-rigid cellular material | 灵活和半刚性的细胞材料 | 活动 |
| ISO/TC 45/SC 4/WG 9 | Elastomeric isolators | 弹性隔离器 | 活动 |
| ISO/TC 45/SC 4/WG 13 | Coated fabrics | 涂层织物 | 活动 |
| ISO/TC 45/SC 4/WG 15 | Rubber bands | 橡皮筋 | 活动 |
| ISO/TC 45/SC 4/WG 16 | General rubber sheets | 普通橡胶板 | 活动 |
| ISO/TC 46/WG 2 | Coding of country names and related entities | 国名和相关实体的编码 | 活动 |
| ISO/TC 46/WG 3 | Conversion of written languages | 书面语言的转换 | 活动 |
| ISO/TC 46/WG 4 | Terminology of information and documentation | 信息和文件的术语 | 活动 |
| ISO/TC 46/WG 13 | Information Governance | 信息治理 | 活动 |
| ISO/TC 46/SC 4/WG 11 | RFID in libraries | 图书馆中的RFID | 活动 |
| ISO/TC 46/SC 4/WG 16 | Dublin Core | 都柏林核心 | 活动 |
| ISO/TC 46/SC 8/WG 2 | International library statistics | 国际图书馆统计 | 活动 |
| ISO/TC 46/SC 8/WG 4 | Performance indicators for libraries | 图书馆的绩效指标 | 活动 |
| ISO/TC 46/SC 8/WG 11 | International museum statistics | 国际博物馆统计 | 活动 |
| ISO/TC 46/SC 8/WG 12 | International archive statistics | 国际档案统计 | 活动 |
| ISO/TC 46/SC 9/WG 17 | RAiD | RAiD | 活动 |
| ISO/TC 46/SC 9/WG 18 | NP 24138 International Standard Content Code | NP 24138 国际标准内容代码 | 活动 |
| ISO/TC 46/SC 10/WG 1 | Document storage requirements | 文件存储要求 | 活动 |
| ISO/TC 46/SC 10/WG 7 | Requirements for materials related to preservation | 对与保存有关的材料的要求 | 活动 |
| ISO/TC 46/SC 10/WG 8 | Permanence and durability of media on paper | 纸上媒体的持久性和耐久性 | 活动 |
| ISO/TC 46/SC 11/JWG 1 | Joint ISO/TC 46/SC 11 - ISO/TC 307 WG: Blockchain | ISO/TC 46/SC 11 - ISO/TC 307联合工作组：区块链 | 活动 |
| ISO/TC 46/SC 11/WG 1 | Metadata | 元数据 | 活动 |
| ISO/TC 46/SC 11/WG 8 | Management systems for records | 记录的管理制度 | 活动 |
| ISO/TC 46/SC 11/WG 17 | Records in the cloud | 云中的记录 | 活动 |
| ISO/TC 46/SC 11/WG 19 | Risk assessment for records processes and systems | 记录流程和系统的风险评估 | 活动 |
| ISO/TC 46/SC 11/WG 20 | Records management capability assessment model | 记录管理能力评估模型 | 活动 |
| ISO/TC 46/SC 11/WG 21 | Disposition | 处理办法 | 活动 |
| ISO/TC 46/SC 11/WG 22 | Records management in structured data environments | 结构化数据环境下的记录管理 | 活动 |
| ISO/TC 47/WG 2 | Light Olefins | 轻质烯烃 | 活动 |
| ISO/TC 47/WG 3 | Sulfur-containing Organics | 含硫有机物 | 活动 |
| ISO/TC 47/WG 4 | Chemical recycling of organic materials | 有机材料的化学回收 | 活动 |
| ISO/TC 48/WG 3 | Microfluidic Devices | 微流控设备 | 活动 |
| ISO/TC 48/WG 4 | Liquid Handling Devices – Manual and Semi-Automatic | 液体处理设备--手动和半自动的 | 活动 |
| ISO/TC 48/WG 5 | Liquid Handling Devices- Automatic | 液体处理设备-自动 | 活动 |
| ISO/TC 48/WG 6 | Non-volumetric glass and plastic ware | 非容积式玻璃和塑料器皿 | 活动 |
| ISO/TC 48/WG 7 | Volumetric apparatus made of glass and plastic | 玻璃和塑料制成的体积计量器具 | 活动 |
| ISO/TC 51/WG 2 | Methods of test for pallets | 托盘的测试方法 | 活动 |
| ISO/TC 51/WG 8 | Pallets with superstructure and wheeled pallets | 带上部结构的托盘和轮式托盘 | 活动 |
| ISO/TC 52/WG 1 | Cartridges for flammable liquefied gas | 可燃性液化气体的气瓶 | 活动 |
| ISO/TC 52/WG 2 | Terminology and classification | 术语和分类 | 活动 |
| ISO/TC 52/WG 3 | Easy-open ends and peel-off ends | 易于打开的末端和剥离的末端 | 活动 |
| ISO/TC 58/WG 7 | Compatibility between gases and materials | 气体和材料之间的相容性 | 活动 |
| ISO/TC 58/WG 10 | Fitting of valves to gas cylinders | 气瓶阀门的安装 | 活动 |
| ISO/TC 58/WG 11 | Terminology | 术语 | 活动 |
| ISO/TC 58/SC 2/WG 4 | Valve stem and cylinder neck threads | 气门杆和气缸颈的螺纹 | 活动 |
| ISO/TC 58/SC 2/WG 6 | Gas cylinder valves - Specifications and testing | 气瓶阀 - 规格和测试 | 活动 |
| ISO/TC 58/SC 2/WG 7 | Determination of properties of gases and gas mixtures | 气体和气体混合物特性的测定 | 活动 |
| ISO/TC 58/SC 2/WG 11 | Allocations of valve outlets | 阀门出口的分配 | 活动 |
| ISO/TC 58/SC 2/WG 12 | Specification and test for LPG cylinder valves | 液化石油气瓶阀门的规格和测试 | 活动 |
| ISO/TC 58/SC 2/WG 14 | Inspection and maintenance of cylinder valves | 检查和维护气缸阀门 | 活动 |
| ISO/TC 58/SC 3/WG 17 | Compressed natural gas cylinders for road vehicles | 用于公路车辆的压缩天然气气瓶 | 活动 |
| ISO/TC 58/SC 3/WG 19 | Refillable seamless aluminium alloy gas cylinders | 可充装的无缝铝合金气瓶 | 活动 |
| ISO/TC 58/SC 3/WG 21 | Refillable welded steel gas cylinders | 可充装的焊接钢制气瓶 | 活动 |
| ISO/TC 58/SC 3/WG 24 | Factors of safety for composite cylinders | 复合材料气瓶的安全系数 | 活动 |
| ISO/TC 58/SC 3/WG 26 | Refillable seamless steel gas cylinders (except stainless steel) | 可充装的无缝钢制气瓶（不锈钢除外） | 活动 |
| ISO/TC 58/SC 3/WG 27 | Composite cylinders | 复合气缸 | 活动 |
| ISO/TC 58/SC 3/WG 29 | Revision of ISO 11118 | 对ISO 11118的修订 | 活动 |
| ISO/TC 58/SC 3/WG 32 | Refillable composite reinforced tubes of water capacity between 150l and 3 000l Design, construction and testing | 水容量在150升和3 000升之间的可填充复合加固管 设计、建造和测试 | 活动 |
| ISO/TC 58/SC 3/WG 33 | Refillable seamless stainless steel gas cylinders | 可充装的无缝不锈钢气瓶 | 活动 |
| ISO/TC 58/SC 3/WG 35 | Permanently mounted composite tubes | 永久安装的复合管 | 活动 |
| ISO/TC 58/SC 3/WG 36 | Service life testing for cylinders and tubes | 气瓶和管道的使用寿命测试 | 活动 |
| ISO/TC 58/SC 4/WG 3 | Methods for inspection and requalification of NGV fuel gas containers | 检查和重新鉴定NGV燃料气体容器的方法 | 活动 |
| ISO/TC 58/SC 4/WG 6 | Cylinder identification | 油缸识别 | 活动 |
| ISO/TC 58/SC 4/WG 10 | Inspection and testing of composite cylinders | 复合材料气瓶的检查和测试 | 活动 |
| ISO/TC 58/SC 4/WG 15 | MAE examination for composite cylinders | 复合气瓶的MAE检查 | 活动 |
| ISO/TC 58/SC 4/WG 18 | Acoustic emission for composite cylinders | 复合材料汽缸的声发射 | 活动 |
| ISO/TC 58/SC 4/WG 19 | Inspection of tubes and frames | 管子和框架的检查 | 活动 |
| ISO/TC 59/WG 4 | Resilience of buildings and civil engineering works | 建筑物和土木工程的复原力 | 活动 |
| ISO/TC 59/SC 2/JWG 3 | Joint ISO/TC 59/SC 2 - ISO/TC 59/SC 17 WG: Vocabulary on sustainability in buildings and civil engineering works | ISO/TC 59/SC 2-ISO/TC 59/SC 17联合工作组：建筑和土木工程的可持续性的词汇 | 活动 |
| ISO/TC 59/SC 2/WG 4 | Maintenance of terminology standards and policies | 维护术语标准和政策 | 活动 |
| ISO/TC 59/SC 8/WG 5 | Determination of higher movement capability | 确定更高的运动能力 | 活动 |
| ISO/TC 59/SC 8/WG 10 | Aesthetic issues | 美学问题 | 活动 |
| ISO/TC 59/SC 13/JWG 12 | Joint ISO/TC 59/SC 13 - ISO/TC 184/SC 4 WG: Development of building data related standards | ISO/TC 59/SC 13 - ISO/TC 184/SC 4联合工作组：制定建筑数据相关标准 | 活动 |
| ISO/TC 59/SC 13/JWG 14 | Joint ISO/TC 59/SC 13 - ISO/TC 211 WG: GIS-BIM interoperability | ISO/TC 59/SC 13 - ISO/TC 211联合工作组：GIS-BIM互操作性 | 活动 |
| ISO/TC 59/SC 13/WG 2 | Classification of the information on the construction industry | 建筑业信息的分类 | 活动 |
| ISO/TC 59/SC 13/WG 8 | Building information models - Information delivery manual | 建筑信息模型--信息传递手册 | 活动 |
| ISO/TC 59/SC 13/WG 11 | Product data for building services systems model | 建筑服务系统模型的产品数据 | 活动 |
| ISO/TC 59/SC 13/WG 13 | Implementation of collaborative working over the asset lifecycle | 在资产生命周期内实施协作工作 | 活动 |
| ISO/TC 59/SC 14/WG 8 | General principles | 一般原则 | 活动 |
| ISO/TC 59/SC 14/WG 10 | Functionality requirements/serviceability | 功能要求/适用性 | 活动 |
| ISO/TC 59/SC 15/WG 6 | Sustainable construction | 可持续建筑 | 活动 |
| ISO/TC 59/SC 15/WG 7 | Accessibility and usability | 可及性和可用性 | 活动 |
| ISO/TC 59/SC 16/WG 4 | Accessibility of immovable cultural heritage | 不可移动的文化遗产的可及性 | 活动 |
| ISO/TC 59/SC 17/WG 1 | General principles and terminology | 一般原则和术语 | 活动 |
| ISO/TC 59/SC 17/WG 3 | Environmental declaration of products | 产品的环境声明 | 活动 |
| ISO/TC 59/SC 17/WG 4 | Environmental performance of buildings | 建筑物的环境性能 | 活动 |
| ISO/TC 59/SC 17/WG 5 | Civil engineering works | 土建工程 | 活动 |
| ISO/TC 59/SC 18/WG 1 | Maintenance of ISO 10845 series | 维护ISO 10845系列 | 活动 |
| ISO/TC 59/SC 18/WG 2 | Governance, strategy and tactics | 治理、战略和战术 | 活动 |
| ISO/TC 60/WG 2 | Accuracy of gears | 齿轮的精确性 | 活动 |
| ISO/TC 60/SC 1/WG 4 | Terminology and notation of gears | 齿轮的术语和记号 | 活动 |
| ISO/TC 60/SC 1/WG 7 | Worm gears | 蜗牛齿轮 | 活动 |
| ISO/TC 60/SC 2/WG 6 | Gear calculations | 齿轮计算 | 活动 |
| ISO/TC 60/SC 2/WG 12 | Load carrying capacity test of oils | 油品的承载能力测试 | 活动 |
| ISO/TC 60/SC 2/WG 13 | Bevel gears | 锥齿轮 | 活动 |
| ISO/TC 60/SC 2/WG 14 | Strength and quality of materials | 材料的强度和质量 | 活动 |
| ISO/TC 61/WG 5 | Electrical, Magnetic & Opto-electrical Properties of Plastics and Composites | 塑料和复合材料的电、磁和光电子特性 | 活动 |
| ISO/TC 61/SC 1/WG 1 | Terms and definitions | 术语和定义 | 活动 |
| ISO/TC 61/SC 1/WG 3 | Symbols | 符号 | 活动 |
| ISO/TC 61/SC 2/WG 1 | Static behavior | 静态行为 | 活动 |
| ISO/TC 61/SC 2/WG 2 | Hardness and surface properties | 硬度和表面特性 | 活动 |
| ISO/TC 61/SC 2/WG 3 | Impact and high speed properties | 冲击和高速性能 | 活动 |
| ISO/TC 61/SC 2/WG 5 | Temperature dependent behavior | 与温度有关的行为 | 活动 |
| ISO/TC 61/SC 2/WG 6 | Dimensions of test specimens | 试验样品的尺寸 | 活动 |
| ISO/TC 61/SC 2/WG 7 | Fracture and fatigue behavior | 断裂和疲劳行为 | 活动 |
| ISO/TC 61/SC 2/WG 8 | Forms of data presentation | 数据展示的形式 | 活动 |
| ISO/TC 61/SC 4/WG 2 | Smoke opacity and corrosivity | 烟雾的不透明度和腐蚀性 | 活动 |
| ISO/TC 61/SC 4/WG 8 | Ignitability and fire growth | 可燃性和火势增长 | 活动 |
| ISO/TC 61/SC 4/WG 9 | Composites and semi-finished products | 复合材料和半成品 | 活动 |
| ISO/TC 61/SC 4/WG 10 | Lighters | 打火机 | 活动 |
| ISO/TC 61/SC 5/WG 5 | Viscosity | 粘度 | 活动 |
| ISO/TC 61/SC 5/WG 8 | Thermal analysis | 热分析 | 活动 |
| ISO/TC 61/SC 5/WG 9 | Rheology | 流变学 | 活动 |
| ISO/TC 61/SC 5/WG 11 | Analytical methods | 分析方法 | 活动 |
| ISO/TC 61/SC 6/WG 2 | Exposure to light | 暴露在光线下 | 活动 |
| ISO/TC 61/SC 6/WG 3 | Various exposures | 各种曝光 | 活动 |
| ISO/TC 61/SC 6/WG 7 | Basic standards | 基本标准 | 活动 |
| ISO/TC 61/SC 9/WG 6 | Polyolefins | 聚烯烃 | 活动 |
| ISO/TC 61/SC 9/WG 7 | Styrene polymers | 苯乙烯聚合物 | 活动 |
| ISO/TC 61/SC 9/WG 8 | Polyamides | 聚酰胺 | 活动 |
| ISO/TC 61/SC 9/WG 14 | Polymer dispersions | 聚合物分散体 | 活动 |
| ISO/TC 61/SC 9/WG 18 | Preparation of test specimens | 测试样品的准备 | 活动 |
| ISO/TC 61/SC 9/WG 20 | Poly(vinyl chloride) | 聚氯乙烯 | 活动 |
| ISO/TC 61/SC 9/WG 26 | Thermoplastic elastomers | 热塑性弹性体 | 活动 |
| ISO/TC 61/SC 9/WG 27 | Template of new designation system | 新指定系统的模板 | 活动 |
| ISO/TC 61/SC 10/WG 10 | Plastic insulation | 塑料绝缘材料 | 活动 |
| ISO/TC 61/SC 10/WG 11 | Physical and chemical properties | 物理和化学特性 | 活动 |
| ISO/TC 61/SC 10/WG 12 | Mechanical and endurance properties | 机械和耐力特性 | 活动 |
| ISO/TC 61/SC 10/WG 14 | Products and materials | 产品和材料 | 活动 |
| ISO/TC 61/SC 11/WG 3 | Plastics films and sheeting | 塑料薄膜和薄板 | 活动 |
| ISO/TC 61/SC 11/WG 5 | Polymeric adhesives | 聚合物胶粘剂 | 活动 |
| ISO/TC 61/SC 11/WG 11 | Wood-plastic composites | 木塑复合材料 | 活动 |
| ISO/TC 61/SC 11/WG 13 | Fiber reinforced plastics modular framework | 纤维增强塑料模块框架 | 活动 |
| ISO/TC 61/SC 11/WG 14 | Plastic joining | 塑料连接 | 活动 |
| ISO/TC 61/SC 11/WG 15 | Scaffold planks and water meter cabinet | 脚手架木板和水表柜 | 活动 |
| ISO/TC 61/SC 12/WG 5 | Unsaturated polyesters, epoxy resins and other resins | 不饱和聚酯、环氧树脂和其他树脂 | 活动 |
| ISO/TC 61/SC 12/WG 6 | Polyurethane raw materials | 聚氨酯原料 | 活动 |
| ISO/TC 61/SC 13/WG 1 | Reinforcements and reinforcement products | 加固物和加固产品 | 活动 |
| ISO/TC 61/SC 13/WG 2 | Laminates and moulding compounds | 层压板和模塑化合物 | 活动 |
| ISO/TC 61/SC 13/WG 7 | Composites and metal assemblies | 复合材料和金属组件 | 活动 |
| ISO/TC 61/SC 14/WG 1 | Terminology, classifications and general guidance | 术语、分类和一般指导 | 活动 |
| ISO/TC 61/SC 14/WG 2 | Biodegradability | 生物降解性 | 活动 |
| ISO/TC 61/SC 14/WG 3 | Biobased plastics | 生物基塑料 | 活动 |
| ISO/TC 61/SC 14/WG 4 | Characterization of plastics leaked into the environment (including microplastics) and quality control criteria of respective methods | 泄漏到环境中的塑料的特征（包括微塑料）和各自方法的质量控制标准 | 活动 |
| ISO/TC 61/SC 14/WG 5 | Mechanical and chemical recycling | 机械和化学回收 | 活动 |
| ISO/TC 67/WG 2 | Operating integrity management | 操作完整性管理 | 活动 |
| ISO/TC 67/WG 4 | Reliability Engineering and technology | 可靠性工程和技术 | 活动 |
| ISO/TC 67/WG 5 | Aluminium alloy pipes | 铝合金管 | 活动 |
| ISO/TC 67/WG 7 | Corrosion resistant materials | 抗腐蚀材料 | 活动 |
| ISO/TC 67/WG 8 | Materials, corrosion control, welding and jointing, and non-destructive examination (NDE) | 材料、腐蚀控制、焊接和连接以及无损检测（NDE） | 活动 |
| ISO/TC 67/WG 11 | Coating and lining for oil and gas industries including lower carbon energy | 用于石油和天然气行业的涂料和衬里，包括低碳能源 | 活动 |
| ISO/TC 67/WG 13 | Bulk materials for offshore projects | 用于海上项目的大宗材料 | 活动 |
| ISO/TC 67/SC 2/WG 10 | Pipeline flanges, fittings and shopbends | 管线法兰、配件和车间弯头 | 活动 |
| ISO/TC 67/SC 2/WG 11 | Pipeline cathodic protection | 管道阴极保护 | 活动 |
| ISO/TC 67/SC 2/WG 13 | Maintenance of ISO 13623 | 维护ISO 13623 | 活动 |
| ISO/TC 67/SC 2/WG 14 | External pipeline protective coatings | 外部管道保护涂层 | 活动 |
| ISO/TC 67/SC 2/WG 15 | Testing procedures for mechanical connectors | 机械连接器的测试程序 | 活动 |
| ISO/TC 67/SC 2/WG 16 | Line pipe | 线路管道 | 活动 |
| ISO/TC 67/SC 2/WG 17 | Pipeline life extension | 延长管道寿命 | 活动 |
| ISO/TC 67/SC 2/WG 19 | Joint ISO/TC 67/SC 2 - ISO/TC 67/SC 4 WG: Wet thermal insulation coatings | ISO/TC 67/SC 2-ISO/TC 67/SC 4联合工作组：湿热绝缘涂层 | 活动 |
| ISO/TC 67/SC 2/WG 21 | Pipeline integrity management | 管道完整性管理 | 活动 |
| ISO/TC 67/SC 2/WG 23 | Geological hazards risk management | 地质灾害风险管理 | 活动 |
| ISO/TC 67/SC 2/WG 24 | DC stray current | 直流杂散电流 | 活动 |
| ISO/TC 67/SC 2/WG 25 | Joint ISO/TC 67/SC 2 – ISO/TC 67/WG 11 WG: Pipeline internal coating | ISO/TC 67/SC 2 - ISO/TC 67/WG 11联合工作组：管道内部涂层 | 活动 |
| ISO/TC 67/SC 2/WG 26 | Terms and definitions | 术语和定义 | 活动 |
| ISO/TC 67/SC 2/WG 27 | Revision of ISO 14313:2007, ISO 14723:2009, ISO 12490:2011 | 对ISO 14313:2007、ISO 14723:2009、ISO 12490:2011的修订 | 活动 |
| ISO/TC 67/SC 3/WG 1 | Drilling, completion and workover fluids | 钻井液、完井液和修井液 | 活动 |
| ISO/TC 67/SC 3/WG 2 | Cementing | 胶合剂 | 活动 |
| ISO/TC 67/SC 3/WG 3 | Well and formation treatment fluids | 油井和地层处理液 | 活动 |
| ISO/TC 67/SC 4/WG 1 | Drilling equipment | 钻探设备 | 活动 |
| ISO/TC 67/SC 4/WG 2 | Drilling well control equipment | 钻井控制设备 | 活动 |
| ISO/TC 67/SC 4/WG 3 | Wellhead and Christmas tree equipment | 井口和圣诞树设备 | 活动 |
| ISO/TC 67/SC 4/WG 4 | Production equipment | 生产设备 | 活动 |
| ISO/TC 67/SC 4/WG 6 | Subsea equipment | 海底设备 | 活动 |
| ISO/TC 67/SC 4/WG 8 | Modular Drilling Rigs | 模块化钻机 | 活动 |
| ISO/TC 67/SC 5/WG 1 | Casing, tubing and drill pipe | 套管、油管和钻杆 | 活动 |
| ISO/TC 67/SC 5/WG 2 | Casing and tubing connections and performance properties | 套管和油管的连接和性能特性 | 活动 |
| ISO/TC 67/SC 5/WG 3 | Casing and tubing made of corrosion resistant alloys (OCTG) | 耐腐蚀合金制成的套管和油管（OCTG） | 活动 |
| ISO/TC 67/SC 5/WG 4 | Requirements, evaluation and testing of thread compounds for use with casing, tubing and line pipe | 用于套管、油管和线管的螺纹化合物的要求、评估和测试 | 活动 |
| ISO/TC 67/SC 5/WG 5 | Lined casing and tubing | 衬里套管和油管 | 活动 |
| ISO/TC 67/SC 6/WG 1 | Process safety in facilities | 设施中的工艺安全 | 活动 |
| ISO/TC 67/SC 6/WG 2 | Lubrication, shaft sealing and control oil systems | 润滑、轴密封和控制油系统 | 活动 |
| ISO/TC 67/SC 6/WG 5 | Piping systems | 管道系统 | 活动 |
| ISO/TC 67/SC 6/WG 8 | Process heat transfer equipment | 工艺传热设备 | 活动 |
| ISO/TC 67/SC 6/WG 11 | Heating, ventilation and air-conditioning | 供暖、通风和空调 | 活动 |
| ISO/TC 67/SC 6/WG 12 | Pressure-relieving and depressuring systems | 减压和降压系统 | 活动 |
| ISO/TC 67/SC 7/WG 1 | General requirements | 一般要求 | 活动 |
| ISO/TC 67/SC 7/WG 3 | Fixed steel structures | 固定钢结构 | 活动 |
| ISO/TC 67/SC 7/WG 4 | Fixed concrete structures | 固定的混凝土结构 | 活动 |
| ISO/TC 67/SC 7/WG 5 | Floating systems | 浮动系统 | 活动 |
| ISO/TC 67/SC 7/WG 6 | Weight engineering | 重量工程 | 活动 |
| ISO/TC 67/SC 7/WG 7 | Site specific assessment of mobile offshore units (MOUS) | 离岸移动装置（MOUS）的现场具体评估 | 活动 |
| ISO/TC 67/SC 7/WG 8 | Offshore Arctic structures | 近海北极结构 | 活动 |
| ISO/TC 67/SC 7/WG 9 | Marine operations | 海上作业 | 活动 |
| ISO/TC 67/SC 7/WG 10 | Foundations | 基金会 | 活动 |
| ISO/TC 67/SC 7/WG 11 | Offshore freight containers | 海上货运集装箱 | 活动 |
| ISO/TC 67/SC 9/WG 7 | Offshore installations for LNG production or regasification | 用于液化天然气生产或再气化的海上装置 | 活动 |
| ISO/TC 67/SC 9/WG 9 | LNG railcar applications | LNG轨道车的应用 | 活动 |
| ISO/TC 67/SC 9/WG 10 | Calculations of GHG emissions throughout the LNG chain | 整个LNG产业链的温室气体排放计算 | 活动 |
| ISO/TC 67/SC 9/WG 11 | Risk assessment | 风险评估 | 活动 |
| ISO/TC 68/SC 2/WG 8 | Public key infrastructure management for financial services | 金融服务的公钥基础设施管理 | 活动 |
| ISO/TC 68/SC 2/WG 11 | Encryption algorithms used in banking applications | 银行应用中使用的加密算法 | 活动 |
| ISO/TC 68/SC 2/WG 13 | Security in retail banking | 零售银行的安全问题 | 活动 |
| ISO/TC 68/SC 2/WG 16 | Security aspects related to third party payment service providers (TPP’s) | 与第三方支付服务提供商（TPP）有关的安全问题 | 活动 |
| ISO/TC 68/SC 2/WG 17 | Security aspects of digital currencies | 数字货币的安全问题 | 活动 |
| ISO/TC 68/SC 2/WG 18 | Customer identification and authentification technologies | 客户识别和认证技术 | 活动 |
| ISO/TC 68/SC 2/WG 19 | Security aspects of code-scanning payment | 扫码支付的安全问题 | 活动 |
| ISO/TC 68/SC 8/WG 3 | Digital Token Identifier – DTI | 数字令牌标识符 - DTI | 活动 |
| ISO/TC 68/SC 8/WG 7 | Natural persons identifier | 自然人标识符 | 活动 |
| ISO/TC 68/SC 8/WG 10 | Revision of the FISN | FISN的修订 | 活动 |
| ISO/TC 68/SC 8/WG 11 | Verifiable LEIs (vLEIs) | 可验证的LEIs（vLEIs） | 活动 |
| ISO/TC 68/SC 9/WG 1 | ISO 20022 Semantic Models | ISO 20022语义模型 | 活动 |
| ISO/TC 68/SC 9/WG 3 | Revision of ISO 8583 and ISO 18245 | 对ISO 8583和ISO 18245的修订 | 活动 |
| ISO/TC 68/SC 9/WG 4 | ISO 20022 Revision | ISO 20022修订版 | 活动 |
| ISO/TC 69/WG 3 | Statistical interpretation of data | 数据的统计解释 | 活动 |
| ISO/TC 69/WG 12 | Big data analytics | 大数据分析 | 活动 |
| ISO/TC 69/WG 13 | Terminology and symbols | 术语和符号 | 活动 |
| ISO/TC 69/SC 4/WG 10 | Control charts | 控制图 | 活动 |
| ISO/TC 69/SC 4/WG 11 | Process capability and performance | 工艺能力和性能 | 活动 |
| ISO/TC 69/SC 4/WG 12 | Implementation of statistical Process Control | 统计过程控制的实施 | 活动 |
| ISO/TC 69/SC 5/WG 2 | Sampling procedures for inspection by attributes (Revision of ISO 2859) | 按属性检查的抽样程序（ISO 2859的修订版） | 活动 |
| ISO/TC 69/SC 5/WG 3 | Sampling procedures and charts for inspection by variables for percent nonconforming (Revision of ISO 3951) | 按变量检查不合格品百分比的抽样程序和图表（ISO 3951的修订版） | 活动 |
| ISO/TC 69/SC 5/WG 10 | Audit sampling | 审计抽样 | 活动 |
| ISO/TC 69/SC 5/WG 11 | Random sampling and randomization procedures | 随机抽样和随机化程序 | 活动 |
| ISO/TC 69/SC 6/WG 1 | Accuracy of measurement methods and results | 测量方法和结果的准确性 | 活动 |
| ISO/TC 69/SC 6/WG 5 | Capability of detection | 探测能力 | 活动 |
| ISO/TC 69/SC 6/WG 7 | Statistical methods to support measurement uncertainty evaluation | 支持测量不确定性评价的统计方法 | 活动 |
| ISO/TC 69/SC 7/WG 1 | Design of experiments | 实验的设计 | 活动 |
| ISO/TC 69/SC 7/WG 2 | Process measurement and measurement capability | 过程测量和测量能力 | 活动 |
| ISO/TC 69/SC 7/WG 3 | Six sigma methodology | 六西格玛方法论 | 活动 |
| ISO/TC 69/SC 8/WG 2 | Transformation | 转型 | 活动 |
| ISO/TC 69/SC 8/WG 3 | Optimization | 优化 | 活动 |
| ISO/TC 70/WG 2 | Terms and definitions | 术语和定义 | 活动 |
| ISO/TC 70/WG 10 | Reciprocating internal combustion engine driven generating sets - Electrical aspect | 往复式内燃机驱动的发电机组 - 电气方面 | 活动 |
| ISO/TC 70/WG 13 | Air-borne noise | 空气传播的噪音 | 活动 |
| ISO/TC 70/WG 14 | Reciprocating internal combustion engine driven generating sets - Mechanical aspect | 往复式内燃机驱动的发电机组 - 机械方面 | 活动 |
| ISO/TC 70/SC 7/WG 2 | Review of the no-reproducibility of Round Robin filtration efficiency results | 审查Round Robin过滤效率结果的不可重复性 | 活动 |
| ISO/TC 70/SC 7/WG 8 | Vibration fatique test with composite materials | 复合材料的振动疲劳试验 | 活动 |
| ISO/TC 70/SC 8/WG 6 | Test bed measurement | 试验台测量 | 活动 |
| ISO/TC 71/WG 1 | Life-cycle management of concrete structures | 混凝土结构的寿命周期管理 | 活动 |
| ISO/TC 71/WG 2 | Design of concrete‐filled steel tubular (CFST) hybrid structures | 混凝土填充的钢管（CFST）混合结构的设计 | 活动 |
| ISO/TC 71/SC 1/WG 3 | Pervious concrete: void content | 透水混凝土：空隙含量 | 活动 |
| ISO/TC 71/SC 1/WG 4 | Test methods for aggregates | 集料的测试方法 | 活动 |
| ISO/TC 71/SC 1/WG 7 | Test methods for sprayed concrete | 喷涂混凝土的测试方法 | 活动 |
| ISO/TC 71/SC 3/WG 1 | Concrete Production and compliance criteria | 混凝土生产和合规标准 | 活动 |
| ISO/TC 71/SC 3/WG 3 | Mixing water for concrete | 混凝土的混合水 | 活动 |
| ISO/TC 71/SC 3/WG 10 | Recycled aggregates for concrete | 用于混凝土的再生骨料 | 活动 |
| ISO/TC 71/SC 4/WG 1 | Performance requirements for design standards on structural concrete | 对结构混凝土设计标准的性能要求 | 活动 |
| ISO/TC 71/SC 5/WG 7 | Small pre-stressed concrete bridges | 小型预应力混凝土桥 | 活动 |
| ISO/TC 71/SC 6/WG 2 | Testing methods for fibre-reinforced cementitious composites | 纤维增强型水泥基复合材料的测试方法 | 活动 |
| ISO/TC 71/SC 6/WG 5 | Discrete polymer fibre for fibre-reinforced cementitious composites | 用于纤维增强水泥基复合材料的离散聚合物纤维 | 活动 |
| ISO/TC 71/SC 6/WG 6 | FRP material properties | 玻璃钢材料特性 | 活动 |
| ISO/TC 71/SC 7/WG 1 | General Principles for Maintenance and Repair | 维护和修理的一般原则 | 活动 |
| ISO/TC 71/SC 7/WG 2 | Condition Assessment, and Design & Execution of Repairs | 状况评估和维修设计与实施 | 活动 |
| ISO/TC 71/SC 7/WG 3 | Leakage due to Cracks | 裂缝造成的漏水 | 活动 |
| ISO/TC 71/SC 7/WG 5 | Structural intervention with overlay of cementitious materials | 覆盖胶凝材料的结构干预 | 活动 |
| ISO/TC 71/SC 7/WG 6 | Assessment, prevention, and repair for steel corrosion in reinforced concrete structures | 钢筋混凝土结构中钢筋腐蚀的评估、预防和修复 | 活动 |
| ISO/TC 71/SC 7/WG 7 | Surface protection systems for underground concrete structures | 地下混凝土结构的表面保护系统 | 活动 |
| ISO/TC 71/SC 8/WG 1 | General principles | 一般原则 | 活动 |
| ISO/TC 71/SC 8/WG 2 | System boundary and inventory data | 系统边界和库存数据 | 活动 |
| ISO/TC 71/SC 8/WG 6 | Execution of concrete structures | 混凝土结构的执行 | 活动 |
| ISO/TC 71/SC 8/WG 7 | Production of concrete constituents and concrete | 混凝土成分和混凝土的生产 | 活动 |
| ISO/TC 71/SC 8/WG 8 | End of life phase of concrete and concrete structures | 混凝土和混凝土结构的寿命终结阶段 | 活动 |
| ISO/TC 72/SC 8/WG 1 | Safety requirements for textile machinery | 纺织机械的安全要求 | 活动 |
| ISO/TC 72/SC 8/WG 2 | Measurement and reduction of noise | 测量和降低噪音 | 活动 |
| ISO/TC 72/SC 8/WG 3 | Safety requirements for wetlaid-nonwoven machinery | 湿法非织造布机械的安全要求 | 活动 |
| ISO/TC 76/WG 1 | Soft containers for blood, blood components and parenterals; Infusion, transfusion and blood processing equipment | 血液、血液成分和母液的软容器；输液、输血和血液处理设备 | 活动 |
| ISO/TC 76/WG 2 | Rigid container systems and related accessories for parenterals and injectables | 用于母液和注射剂的刚性容器系统和相关配件 | 活动 |
| ISO/TC 76/WG 4 | Elastomeric parts and components and related secondary packaging components | 弹性部件和组件以及相关的二次包装部件 | 活动 |
| ISO/TC 79/SC 2/WG 15 | Anodic oxidation coatings on aluminium | 铝的阳极氧化涂层 | 活动 |
| ISO/TC 79/SC 5/WG 4 | Analysis of magnesium and magnesium alloys | 镁和镁合金的分析 | 活动 |
| ISO/TC 79/SC 5/WG 9 | magnesium alloy product | 镁合金产品 | 活动 |
| ISO/TC 79/SC 11/WG 2 | Chemical analysis | 化学分析 | 活动 |
| ISO/TC 79/SC 11/WG 4 | Material designation system | 材料指定系统 | 活动 |
| ISO/TC 79/SC 11/WG 5 | Material specifications | 材料规格 | 活动 |
| ISO/TC 82/JWG 1 | Joint ISO/TC 82 - ISO/TC 127 - ISO/TC 195/SC 3 WG : Rock drill rigs | ISO/TC 82 - ISO/TC 127 - ISO/TC 195/SC 3联合工作组：凿岩机 | 活动 |
| ISO/TC 82/WG 4 | Structures for mine shafts | 矿井的结构 | 活动 |
| ISO/TC 82/WG 8 | Terminology | 术语 | 活动 |
| ISO/TC 82/WG 9 | Operator enclosures | 操作员外壳 | 活动 |
| ISO/TC 82/WG 10 | Mine hoists and mine winders | 矿井提升机和矿井卷扬机 | 活动 |
| ISO/TC 82/SC 7/WG 1 | Mine closure and reclamation terminology | 矿山关闭和复垦术语 | 活动 |
| ISO/TC 82/SC 7/WG 3 | Managing mining legacies | 管理采矿业的遗产 | 活动 |
| ISO/TC 82/SC 8/JWG 1 | Joint ISO/TC 82/SC 8 - ISO/TC 127/SC 2 WG Remote stop function for mining equipment | ISO/TC 82/SC 8 - ISO/TC 127/SC 2联合工作组 采矿设备的远程停止功能 | 活动 |
| ISO/TC 82/SC 8/JWG 2 | Joint ISO/TC 82/SC 8 - ISO/TC 127/SC 2 WG FMS interface | ISO/TC 82/SC 8-ISO/TC 127/SC 2 WG FMS联合接口 | 活动 |
| ISO/TC 82/SC 8/JWG 3 | Joint ISO/TC 82/SC 8 - ISO/TC 127/SC 3 WG: Reference framework and architecture for advanced automation and autonomy | ISO/TC 82/SC 8 - ISO/TC 127/SC 3联合工作组：先进自动化和自主性的参考框架和架构 | 活动 |
| ISO/TC 82/SC 8/JWG 4 | Joint ISO/TC 82/SC 8 - ISO/TC 127/SC 3 WG: Specification of interoperability of teleoperated, autonomous, and manned mining equipment | ISO/TC 82/SC 8 - ISO/TC 127/SC 3联合工作组：远程操作、自主和载人采矿设备的互操作性规范 | 活动 |
| ISO/TC 83/WG 2 | Camping tents | 露营帐篷 | 活动 |
| ISO/TC 83/WG 4 | Computer vision systems for the detection of drowning accidents in swimming pools | 用于检测游泳池中溺水事故的计算机视觉系统 | 活动 |
| ISO/TC 83/WG 6 | Hazard identification and risk assessment | 危险识别和风险评估 | 活动 |
| ISO/TC 83/WG 7 | Sleeping bags | 睡袋 | 活动 |
| ISO/TC 83/WG 8 | Playground equipment | 游乐场设备 | 活动 |
| ISO/TC 83/WG 9 | Floating leisure articles | 漂浮的休闲用品 | 活动 |
| ISO/TC 83/WG 10 | Sport games | 体育游戏 | 活动 |
| ISO/TC 83/SC 4/WG 1 | Boots for ski and snowboard | 用于滑雪和滑雪板的靴子 | 活动 |
| ISO/TC 83/SC 4/WG 2 | Bindings for ski and snowboard | 滑雪和滑雪板的固定装置 | 活动 |
| ISO/TC 83/SC 4/WG 3 | Skis and snowboards | 滑雪板和雪橇 | 活动 |
| ISO/TC 83/SC 5/WG 3 | Protective equipment for use in ice hockey | 用于冰球运动的保护性设备 | 活动 |
| ISO/TC 83/SC 6/WG 2 | Martial art equipment | 武术装备 | 活动 |
| ISO/TC 84/WG 3 | Needle-based injection systems - Injector, container and pen needle | 基于针头的注射系统--注射器、容器和笔针 | 活动 |
| ISO/TC 84/WG 8 | Sharps containers | 利器容器 | 活动 |
| ISO/TC 84/WG 9 | Catheters | 导管 | 活动 |
| ISO/TC 84/WG 10 | Needles | 针头 | 活动 |
| ISO/TC 84/WG 11 | Syringes | 注射器 | 活动 |
| ISO/TC 84/WG 16 | Drug delivery system requirements for paediatrics and other demographics | 儿科和其他人口统计学的给药系统要求 | 活动 |
| ISO/TC 84/WG 17 | Specification and demonstration of reliability of single-use drug delivery systems | 一次性使用给药系统的规范和可靠性论证 | 活动 |
| ISO/TC 85/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 85/WG 3 | Dosimetry for radiation processing | 辐射处理的剂量测定 | 活动 |
| ISO/TC 85/SC 2/WG 2 | Reference radiations fields | 参考辐射场 | 活动 |
| ISO/TC 85/SC 2/WG 13 | Monitoring and dosimetry for internal exposure | 内部暴露的监测和剂量测定 | 活动 |
| ISO/TC 85/SC 2/WG 14 | Air control and monitoring | 空气控制和监测 | 活动 |
| ISO/TC 85/SC 2/WG 17 | Radioactivity measurements | 放射性测量 | 活动 |
| ISO/TC 85/SC 2/WG 18 | Biological and physical retrospective dosimetry | 生物学和物理学的回顾性剂量测定 | 活动 |
| ISO/TC 85/SC 2/WG 19 | Individual monitoring of external radiation | 对外部辐射的个别监测 | 活动 |
| ISO/TC 85/SC 2/WG 20 | Illicit trafficking in radio活动 material | 非法贩运放射性材料 | 活动 |
| ISO/TC 85/SC 2/WG 21 | Dosimetry for exposures to cosmic radiation in civilian aircraft | 民用飞机上暴露于宇宙辐射的剂量测定法 | 活动 |
| ISO/TC 85/SC 2/WG 22 | Dosimetry and related protocols in medical applications of ionizing radiation | 电离辐射医疗应用中的剂量测定和相关协议 | 活动 |
| ISO/TC 85/SC 2/WG 23 | Shielding and confinement systems for protection against ionizing radiation | 用于保护电离辐射的屏蔽和封闭系统 | 活动 |
| ISO/TC 85/SC 2/WG 25 | Radiation monitoring of the population and responders in nuclear/radiological emergencies | 在核/辐射紧急情况下对民众和应对人员的辐射监测 | 活动 |
| ISO/TC 85/SC 5/WG 1 | Analytical methodology in the nuclear fuel cycle | 核燃料循环中的分析方法 | 活动 |
| ISO/TC 85/SC 5/WG 4 | Transportation of radio活动 material | 放射性材料的运输 | 活动 |
| ISO/TC 85/SC 5/WG 5 | Characterisation and waste management | 特性和废物管理 | 活动 |
| ISO/TC 85/SC 5/WG 8 | Nuclear criticality safety | 核临界安全 | 活动 |
| ISO/TC 85/SC 5/WG 13 | Decommissioning : decontamination, dismantling and remediation | 退役：去污、拆除和修复 | 活动 |
| ISO/TC 85/SC 6/WG 1 | Power reactor analyses and measurements | 功率反应堆的分析和测量 | 活动 |
| ISO/TC 85/SC 6/WG 2 | Research, test and isotope-production reactors | 研究、试验和同位素生产反应堆 | 活动 |
| ISO/TC 85/SC 6/WG 3 | Power reactor, siting, design, construction, operation, and decommissioning | 电力反应堆，选址、设计、施工、运行和退役 | 活动 |
| ISO/TC 86/SC 1/WG 1 | Safety and environmental requirements for refrigerating systems and heat pumps | 制冷系统和热泵的安全和环境要求 | 活动 |
| ISO/TC 86/SC 4/WG 2 | Positive displacement refrigerant compressor | 正排量制冷剂压缩机 | 活动 |
| ISO/TC 86/SC 4/WG 3 | Centrifugal refrigerant compressor | 离心式冷媒压缩机 | 活动 |
| ISO/TC 86/SC 4/WG 4 | Revision of ISO 917 | 对ISO 917的修订 | 活动 |
| ISO/TC 86/SC 6/WG 1 | Air-source air-conditioners and heat pumps | 空气源空调和热泵 | 活动 |
| ISO/TC 86/SC 6/WG 3 | Water and brine source heat pumps and air-conditioners | 水和盐水源热泵和空调 | 活动 |
| ISO/TC 86/SC 6/WG 10 | Energy recovery ventilators | 能源回收通风器 | 活动 |
| ISO/TC 86/SC 6/WG 12 | Heat pump water heaters | 热泵热水器 | 活动 |
| ISO/TC 86/SC 6/WG 14 | Update of measuring technologies | 测量技术的更新 | 活动 |
| ISO/TC 86/SC 6/WG 15 | Advanced performance standards | 先进的性能标准 | 活动 |
| ISO/TC 86/SC 7/WG 1 | Refrigerated, blast cabinets and ice makers for professional use | 用于专业用途的冷藏、防爆柜和制冰机 | 活动 |
| ISO/TC 86/SC 7/WG 2 | Commercial beverage coolers and ice cream freezers | 商业饮料冷却器和冰激凌冷冻器 | 活动 |
| ISO/TC 86/SC 7/WG 3 | Commercial refrigerated display cabinets | 商业冷藏展示柜 | 活动 |
| ISO/TC 86/SC 8/WG 5 | Refrigerants - Designation and safety classification | 制冷剂 - 指定和安全分类 | 活动 |
| ISO/TC 86/SC 8/WG 7 | Refrigerant properties | 制冷剂特性 | 活动 |
| ISO/TC 86/SC 8/WG 8 | Burning Velocity Test Methods | 燃烧速度测试方法 | 活动 |
| ISO/TC 87/WG 9 | Stoppers - Physical test methods | 瓶塞 - 物理测试方法 | 活动 |
| ISO/TC 87/WG 10 | Stoppers - Chemical test methods | 瓶塞 - 化学测试方法 | 活动 |
| ISO/TC 87/WG 12 | Stoppers - Sensorial test methods | 塞子 - 感官测试方法 | 活动 |
| ISO/TC 87/WG 14 | Sampling | 抽样调查 | 活动 |
| ISO/TC 87/WG 15 | Sustainable development in the cork field | 软木领域的可持续发展 | 活动 |
| ISO/TC 87/WG 17 | Raw material | 原材料 | 活动 |
| ISO/TC 87/WG 18 | Cork Vocabulary | 科克词汇 | 活动 |
| ISO/TC 87/WG 19 | Cork - Specifications | 软木 - 规格 | 活动 |
| ISO/TC 89/WG 5 | Test methods | 测试方法 | 活动 |
| ISO/TC 91/WG 1 | Analytical methods | 分析方法 | 活动 |
| ISO/TC 91/WG 3 | Bio-surfactants | 生物表面活性剂 | 活动 |
| ISO/TC 91/WG 4 | Liquid Laundry Detergent Capsules | 液体洗衣粉胶囊 | 活动 |
| ISO/TC 91/WG 5 | Vocabulary | 词汇 | 活动 |
| ISO/TC 92/WG 8 | Fire terms and definitions | 消防术语和定义 | 活动 |
| ISO/TC 92/WG 13 | Fire safety – Statistical data collection | 消防安全 - 统计数据收集 | 活动 |
| ISO/TC 92/WG 14 | Large outdoor fires and the built environment | 大型户外火灾和建筑环境 | 活动 |
| ISO/TC 92/WG 15 | Fire safety for tunnels | 隧道的消防安全 | 活动 |
| ISO/TC 92/SC 1/WG 5 | Small and bench scale fire test methods | 小规模和工作台规模的火灾测试方法 | 活动 |
| ISO/TC 92/SC 1/WG 7 | Large and intermediate scale fire test methods | 大规模和中等规模的火灾试验方法 | 活动 |
| ISO/TC 92/SC 1/WG 10 | Specifications for measuring devices and instruments used in fire tests and methodologies of analysis | 用于火灾测试的测量装置和仪器的规格以及分析方法 | 活动 |
| ISO/TC 92/SC 1/WG 11 | Methods of use of reaction to fire tests for fire safety engineering | 用于消防安全工程的火灾反应测试的使用方法 | 活动 |
| ISO/TC 92/SC 1/WG 15 | Joint ISO/TC 92/SC 1 - ISO/TC 126 WG: Ignition propensity of cigarettes | ISO/TC 92/SC 1 - ISO/TC 126联合工作组：香烟的点火倾向 | 活动 |
| ISO/TC 92/SC 2/WG 1 | General requirements | 一般要求 | 活动 |
| ISO/TC 92/SC 2/WG 2 | Calculation methods | 计算方法 | 活动 |
| ISO/TC 92/SC 2/WG 3 | Fire resistance tests for doors, shutters and glazed elements | 门、百叶窗和玻璃元素的耐火测试 | 活动 |
| ISO/TC 92/SC 2/WG 4 | Ventilation ducts and fire dampers | 通风管和防火阀 | 活动 |
| ISO/TC 92/SC 2/WG 6 | Penetrations and joints | 渗透和接头 | 活动 |
| ISO/TC 92/SC 2/WG 8 | Jet fires | 喷气机起火 | 活动 |
| ISO/TC 92/SC 2/WG 11 | Fire Resistance of Separating Elements Exposed to Hydrocarbon Type Fires | 暴露在碳氢化合物类型火灾中的分离元件的耐火性 | 活动 |
| ISO/TC 92/SC 3/WG 1 | Fire model | 火灾模型 | 活动 |
| ISO/TC 92/SC 3/WG 2 | Fire chemistry | 火灾化学 | 活动 |
| ISO/TC 92/SC 3/WG 5 | Prediction of toxic effects of fire effluents | 预测火灾废水的毒性作用 | 活动 |
| ISO/TC 92/SC 3/WG 6 | Fire Threat to the Environment | 火灾对环境的威胁 | 活动 |
| ISO/TC 92/SC 4/WG 1 | Application of fire safety performance concepts to design objectives | 将消防安全性能概念应用于设计目标 | 活动 |
| ISO/TC 92/SC 4/WG 6 | Design fire scenarios and design fires | 设计火灾场景和设计火灾 | 活动 |
| ISO/TC 92/SC 4/WG 7 | Verification and validation of calculation methods | 计算方法的核查和验证 | 活动 |
| ISO/TC 92/SC 4/WG 9 | Calculation methods for FSE | FSE的计算方法 | 活动 |
| ISO/TC 92/SC 4/WG 10 | Fire risk assessment | 火灾风险评估 | 活动 |
| ISO/TC 92/SC 4/WG 11 | Behaviour and movement of people | 人们的行为和行动 | 活动 |
| ISO/TC 92/SC 4/WG 12 | Structures in fires | 火灾中的结构 | 活动 |
| ISO/TC 92/SC 4/WG 13 | 活动 fire protection systems | 主动防火系统 | 活动 |
| ISO/TC 93/WG 9 | Modified starches | 改性淀粉 | 活动 |
| ISO/TC 94/WG 1 | Compatibility of PPE items | 个人防护设备项目的兼容性 | 活动 |
| ISO/TC 94/WG 2 | Head protection | 头部保护 | 活动 |
| ISO/TC 94/SC 3/WG 1 | PPE footwear – Test methods | PPE鞋类 - 测试方法 | 活动 |
| ISO/TC 94/SC 3/WG 2 | PPE footwear – Requirements | PPE鞋类 - 要求 | 活动 |
| ISO/TC 94/SC 6/JWG 1 | Joint ISO/TC 94/SC 6-IEC/TC 76 WG: Requirements for eye and face protection against laser radiation | ISO/TC 94/SC 6-IEC/TC 76联合工作组：对激光辐射的眼睛和脸部保护要求 | 活动 |
| ISO/TC 94/SC 6/WG 2 | Test methods | 测试方法 | 活动 |
| ISO/TC 94/SC 6/WG 3 | Sunglasses and related eyewear | 太阳镜和相关眼镜 | 活动 |
| ISO/TC 94/SC 6/WG 4 | Occupational eye and face protection | 职业性眼脸保护 | 活动 |
| ISO/TC 94/SC 6/WG 5 | Sports eye and face protection | 运动用眼和面部保护 | 活动 |
| ISO/TC 94/SC 13/JWG 1 | Revision ISO 16602 & ISO 8194 | 修订版ISO 16602和ISO 8194 | 活动 |
| ISO/TC 94/SC 13/WG 1 | General properties | 一般属性 | 活动 |
| ISO/TC 94/SC 13/WG 2 | Protective clothing against heat and flame | 防热和防火焰的保护性服装 | 活动 |
| ISO/TC 94/SC 13/WG 3 | Protective clothing against chemicals agents | 防御化学品制剂的防护服 | 活动 |
| ISO/TC 94/SC 13/WG 5 | Protective clothing against mechanical action | 防止机械作用的保护性服装 | 活动 |
| ISO/TC 94/SC 13/WG 6 | Protective clothing against hazardous biological agents | 防止危险生物制剂的防护服 | 活动 |
| ISO/TC 94/SC 13/WG 8 | Standardization for protective gloves | 防护手套的标准化 | 活动 |
| ISO/TC 94/SC 14/JWG 1 | Joint ISO/TC 94/SC 14 - ISO/TC 94/SC 13 WG: Chemical, biological, radiological and nuclear (CBRN) | ISO/TC 94/SC 14 - ISO/TC 94/SC 13联合工作组：化学、生物、辐射和核（CBRN） | 活动 |
| ISO/TC 94/SC 14/WG 1 | General requirements | 一般要求 | 活动 |
| ISO/TC 94/SC 14/WG 2 | Firefighting | 消防 | 活动 |
| ISO/TC 94/SC 14/WG 3 | Wildland firefighting | 荒地消防 | 活动 |
| ISO/TC 94/SC 14/WG 4 | Hazardous materials incidents (hazmat) | 危险材料事故（hazmat） | 活动 |
| ISO/TC 94/SC 14/WG 5 | Non-fire rescue incidents (Rescue) | 非火灾救援事件（救援） | 活动 |
| ISO/TC 94/SC 15/JWG 1 | Respiratory Protective Device (RPD) | 呼吸道保护装置（RPD） | 休眠 |
| ISO/TC 94/SC 15/WG 4 | Test methods | 测试方法 | 活动 |
| ISO/TC 94/SC 15/WG 5 | Human factors | 人为因素 | 活动 |
| ISO/TC 94/SC 15/WG 6 | Selection and use | 选择和使用 | 活动 |
| ISO/TC 94/SC 15/WG 7 | CBRN | CBRN | 活动 |
| ISO/TC 94/SC 15/WG 23 | Filtering and supplied breathable gas RPD | 过滤和供应的透气性气体RPD | 活动 |
| ISO/TC 96/WG 3 | Telematics | 远程信息处理 | 活动 |
| ISO/TC 96/SC 2/WG 1 | Revision of ISO 4306-1 | 对ISO 4306-1的修订 | 活动 |
| ISO/TC 96/SC 3/WG 3 | Selection of wire ropes, drums and sheaves | 钢丝绳、滚筒和滑轮的选择 | 活动 |
| ISO/TC 96/SC 4/WG 2 | Energy efficiency test methods of electrical hoists | 电动葫芦的能源效率测试方法 | 活动 |
| ISO/TC 96/SC 4/WG 3 | Test code and procedures | 测试代码和程序 | 活动 |
| ISO/TC 96/SC 5/WG 1 | Principle of safety management for wind by users | 用户对风的安全管理原则 | 活动 |
| ISO/TC 96/SC 5/WG 2 | Revision ISO 12480-1 | 修订版ISO 12480-1 | 活动 |
| ISO/TC 96/SC 5/WG 3 | Cranes - Training of slingers and signalers | 起重机--吊装工和信号工的培训 | 活动 |
| ISO/TC 96/SC 6/WG 3 | Safe use of mobile cranes | 安全使用移动式起重机 | 活动 |
| ISO/TC 96/SC 6/WG 4 | Development of ISO 13200 | ISO13200的发展 | 活动 |
| ISO/TC 96/SC 6/WG 5 | Development of ISO 19961 | ISO19961的发展 | 活动 |
| ISO/TC 96/SC 7/WG 4 | Operating manual | 操作手册 | 活动 |
| ISO/TC 96/SC 7/WG 5 | Access | 访问 | 活动 |
| ISO/TC 96/SC 8/WG 5 | Revision of ISO 9374-1 and ISO 9374-4 | 对ISO 9374-1和ISO 9374-4的修订 | 活动 |
| ISO/TC 96/SC 8/WG 6 | Review of ISO 4301-4 | 对ISO 4301-4的审查 | 活动 |
| ISO/TC 96/SC 9/WG 5 | Classification - Bridge & Gantry Cranes | 分类 - 桥式起重机和龙门起重机 | 活动 |
| ISO/TC 96/SC 9/WG 6 | Mechanisms | 机制 | 活动 |
| ISO/TC 96/SC 10/WG 1 | Panel of technical experts | 技术专家小组 | 活动 |
| ISO/TC 98/SC 2/WG 13 | Design principles of seismically isolated structures | 地震隔离结构的设计原则 | 活动 |
| ISO/TC 98/SC 3/WG 1 | Snow loads | 雪载荷 | 活动 |
| ISO/TC 98/SC 3/WG 2 | Wind actions on structures | 风对结构的作用 | 活动 |
| ISO/TC 98/SC 3/WG 10 | Seismic actions on geotechnical works | 地震对岩土工程的影响 | 活动 |
| ISO/TC 98/SC 3/WG 11 | Seismic actions on non structural components for building applications | 建筑应用中非结构部件的地震作用 | 活动 |
| ISO/TC 102/SC 2/WG 43 | Pressed-powder XRF | 压制粉体XRF | 活动 |
| ISO/TC 102/SC 2/WG 53 | Total iron content by EDTA titrimetric method | 用EDTA滴定法测定总铁含量 | 活动 |
| ISO/TC 102/SC 2/WG 54 | Determination of various elements by XRF - Single element calibration procedure (ISO 9516-2) | 用XRF测定各种元素--单元素校准程序（ISO 9516-2） | 活动 |
| ISO/TC 102/SC 2/WG 55 | Fe Metal in sponge iron and briquettes | 海绵铁和煤球中的金属铁 | 活动 |
| ISO/TC 102/SC 2/WG 56 | Determination of fluorine content | 氟含量的测定 | 活动 |
| ISO/TC 102/SC 3/WG 19 | Determination of the compaction curve by Proctor/Fagerberg methods | 用Proctor/Fagerberg方法确定压实度曲线 | 活动 |
| ISO/TC 102/SC 3/WG 20 | Determination of the Decrepitation Index | 腐烂指数的确定 | 活动 |
| ISO/TC 104/WG 9 | Revision of ISO 830 | 对ISO 830的修订 | 活动 |
| ISO/TC 104/SC 1/WG 1 | General cargo containers | 普通货物集装箱 | 活动 |
| ISO/TC 104/SC 1/WG 2 | Handling and securing | 搬运和固定 | 活动 |
| ISO/TC 104/SC 2/WG 1 | Thermal containers | 保温容器 | 活动 |
| ISO/TC 104/SC 2/WG 4 | Tank containers | 罐式集装箱 | 活动 |
| ISO/TC 104/SC 2/WG 7 | Dry bulk cargo containers | 干散装货物集装箱 | 活动 |
| ISO/TC 104/SC 4/WG 1 | Coding, identification and marking (Revision of ISO 6346) | 编码、识别和标记（ISO 6346的修订版） | 活动 |
| ISO/TC 104/SC 4/WG 2 | AEI for containers and container related equipment | 集装箱和集装箱相关设备的AEI | 活动 |
| ISO/TC 104/SC 4/WG 3 | Communication and terminology | 沟通和术语 | 活动 |
| ISO/TC 105/WG 9 | Steel wire ropes for conveyor belts | 用于传送带的钢丝绳 | 活动 |
| ISO/TC 105/WG 11 | Stainless steel wire ropes | 不锈钢丝绳 | 活动 |
| ISO/TC 105/WG 12 | Revision of ISO 10425 | 对ISO 10425的修订 | 活动 |
| ISO/TC 105/WG 13 | Fibre main cores of steel wire ropes (Revision of 4345:1988) | 钢丝绳的纤维主芯（4345:1988的修订版） | 活动 |
| ISO/TC 106/WG 10 | Biological evaluation | 生物学评价 | 活动 |
| ISO/TC 106/WG 12 | Dental implant surgical guide | 种植牙手术指南 | 活动 |
| ISO/TC 106/WG 13 | Dentistry — Artificial intelligence (AI) based 2D X-ray analysis — Data generation, data annotation and data processing | 牙科 - 基于人工智能（AI）的二维X光分析 - 数据生成、数据注释和数据处理 | 活动 |
| ISO/TC 106/SC 1/WG 2 | Endodontic materials | 牙体牙髓材料 | 活动 |
| ISO/TC 106/SC 1/WG 7 | Dental amalgam | 牙科用汞合金 | 活动 |
| ISO/TC 106/SC 1/WG 10 | Dental luting cements, bases and liners | 牙科粘接剂、基底和衬垫物 | 活动 |
| ISO/TC 106/SC 1/WG 11 | Adhesion test methods | 粘合力测试方法 | 活动 |
| ISO/TC 106/SC 1/WG 13 | Orthodontic products | 牙齿矫正产品 | 活动 |
| ISO/TC 106/SC 2/WG 1 | Dental ceramics | 牙科陶瓷 | 活动 |
| ISO/TC 106/SC 2/WG 6 | Colour stability test methods | 颜色稳定性测试方法 | 活动 |
| ISO/TC 106/SC 2/WG 7 | Impression materials | 印象材料 | 活动 |
| ISO/TC 106/SC 2/WG 11 | Denture base polymers | 假牙基质聚合物 | 活动 |
| ISO/TC 106/SC 2/WG 12 | Corrosion test methods | 腐蚀测试方法 | 活动 |
| ISO/TC 106/SC 2/WG 14 | Dental brazing materials | 牙科钎焊材料 | 活动 |
| ISO/TC 106/SC 2/WG 16 | Polymer veneering and die materials | 聚合物贴面和模具材料 | 活动 |
| ISO/TC 106/SC 2/WG 18 | Dental waxes and baseplate waxes | 牙科蜡和底板蜡 | 活动 |
| ISO/TC 106/SC 2/WG 20 | Artificial teeth | 人工牙齿 | 活动 |
| ISO/TC 106/SC 2/WG 21 | Metallic materials | 金属材料 | 活动 |
| ISO/TC 106/SC 2/WG 23 | Chairside denture base relining materials | 椅旁义齿基底重衬材料 | 活动 |
| ISO/TC 106/SC 2/WG 24 | Mechanical retention | 机械保留 | 活动 |
| ISO/TC 106/SC 3/WG 1 | Harmonization of dental codes and abbreviations | 统一牙科编码和缩略语 | 活动 |
| ISO/TC 106/SC 3/WG 2 | Dental vocabulary (Revision of ISO 1942 and thematic coding of its terms) | 牙科词汇（修订ISO 1942并对其术语进行专题编码） | 活动 |
| ISO/TC 106/SC 3/WG 5 | Terminology for forensic orodental data | 法医口述资料的术语 | 活动 |
| ISO/TC 106/SC 4/WG 1 | Rotary instruments | 旋转仪器 | 活动 |
| ISO/TC 106/SC 4/WG 7 | Dental Handpieces | 牙科手机 | 活动 |
| ISO/TC 106/SC 4/WG 8 | Dental hand instruments | 牙科手工器械 | 活动 |
| ISO/TC 106/SC 4/WG 9 | Endodontic instruments | 根管治疗器械 | 活动 |
| ISO/TC 106/SC 4/WG 13 | Implant instruments | 种植体工具 | 活动 |
| ISO/TC 106/SC 4/WG 14 | Materials for dental instruments | 牙科器械的材料 | 活动 |
| ISO/TC 106/SC 6/WG 1 | Dental operating light | 牙科手术灯 | 活动 |
| ISO/TC 106/SC 6/WG 2 | Dental patient chair and dental unit | 牙科病人椅和牙科单元 | 活动 |
| ISO/TC 106/SC 6/WG 7 | Powered polymerization activators | 动力型聚合活化剂 | 活动 |
| ISO/TC 106/SC 6/WG 8 | Suction equipment | 抽吸设备 | 活动 |
| ISO/TC 106/SC 6/WG 9 | Particular electrical requirements of dental equipment | 牙科设备的特殊电气要求 | 活动 |
| ISO/TC 106/SC 6/WG 10 | Spaulding classification of reprocessable dental devices | Spaulding可再加工牙科设备的分类 | 活动 |
| ISO/TC 106/SC 7/WG 1 | Manual tooth brushes | 手动牙刷 | 活动 |
| ISO/TC 106/SC 7/WG 2 | Powered oral hygiene devices | 供电的口腔卫生设备 | 活动 |
| ISO/TC 106/SC 7/WG 3 | Oral Rinses | 口腔漂洗剂 | 活动 |
| ISO/TC 106/SC 7/WG 4 | Dentifrice | 牙膏 | 活动 |
| ISO/TC 106/SC 7/WG 5 | Interdental Brushes | 齿间刷 | 活动 |
| ISO/TC 106/SC 7/WG 7 | Dental Bleaching Products | 牙齿漂白产品 | 活动 |
| ISO/TC 106/SC 7/WG 8 | Fluoride Varnishes | 氟化物清漆 | 活动 |
| ISO/TC 106/SC 7/WG 9 | Dentures adhesives | 假牙黏合剂 | 活动 |
| ISO/TC 106/SC 7/WG 10 | Analytical methods for oral care products | 口腔护理产品的分析方法 | 活动 |
| ISO/TC 106/SC 8/WG 3 | Content of technical files | 技术文件的内容 | 活动 |
| ISO/TC 106/SC 8/WG 4 | Mechanical testing | 机械测试 | 活动 |
| ISO/TC 106/SC 8/WG 5 | Dentistry – Implant Terminology | 牙科 - 种植体术语 | 活动 |
| ISO/TC 106/SC 8/WG 7 | Evaluation of connective interfaces of dental implant systems | 评估牙科种植系统的连接界面 | 活动 |
| ISO/TC 106/SC 9/WG 2 | Terminology | 术语 | 活动 |
| ISO/TC 106/SC 9/WG 3 | Digitizing devices | 数字化设备 | 活动 |
| ISO/TC 106/SC 9/WG 4 | Interoperability | 互操作性 | 活动 |
| ISO/TC 106/SC 9/WG 5 | Machined devices | 机加工的装置 | 活动 |
| ISO/TC 106/SC 9/WG 6 | Machinable blanks | 可加工毛坯 | 活动 |
| ISO/TC 106/SC 9/WG 7 | Additive manufacturing of dental products | 牙科产品的增材制造 | 活动 |
| ISO/TC 107/JWG 4 | Joint ISO/TC 107 - ISO/TC 35/SC 9 WG: Thickness measurement methods for coatings, paints and varnishes | ISO/TC 107 - ISO/TC 35/SC 9联合工作组：涂料、油漆和清漆的厚度测量方法 | 活动 |
| ISO/TC 107/WG 1 | Thermal spraying | 热喷涂 | 活动 |
| ISO/TC 107/WG 2 | Vitreous and porcelain enamel coatings | 搪瓷和瓷釉涂层 | 活动 |
| ISO/TC 107/WG 5 | Atomic layer deposition | 原子层沉积 | 活动 |
| ISO/TC 107/SC 3/WG 3 | Hydrogen embrittlement prevention and testing | 氢脆性的预防和测试 | 活动 |
| ISO/TC 108/WG 28 | Vibration materials | 振动材料 | 活动 |
| ISO/TC 108/WG 33 | Human response to vibration - Measuring instrumentation | 人类对振动的反应 - 测量仪器 | 活动 |
| ISO/TC 108/WG 34 | Calibration of vibration and shock transducers | 振动和冲击传感器的校准 | 活动 |
| ISO/TC 108/SC 2/WG 1 | Rotordynamics and vibration of machines | 机器的旋转动力学和振动 | 活动 |
| ISO/TC 108/SC 2/WG 7 | Vibration of machines with 活动 magnetic bearings | 带主动磁性轴承的机器的振动 | 活动 |
| ISO/TC 108/SC 2/WG 8 | Ground-borne noise and vibration from rail systems | 来自铁路系统的地面噪声和振动 | 活动 |
| ISO/TC 108/SC 2/WG 10 | Basic techniques for vibration diagnostics | 振动诊断的基本技术 | 活动 |
| ISO/TC 108/SC 2/WG 31 | Balancing | 平衡 | 活动 |
| ISO/TC 108/SC 4/WG 3 | Hand-transmitted vibration | 手部传递的振动 | 活动 |
| ISO/TC 108/SC 4/WG 9 | Whole-body vibration in railbound vehicles | 轨道交通车辆的全身振动 | 活动 |
| ISO/TC 108/SC 4/WG 13 | Evaluation of human exposure to whole-body vibration | 评估人类对全身振动的暴露 | 活动 |
| ISO/TC 108/SC 4/WG 14 | Posture related to whole-body vibration | 与全身振动有关的姿态 | 活动 |
| ISO/TC 108/SC 4/WG 19 | General aspects of human exposure to vibration | 人类接触振动的一般方面 | 活动 |
| ISO/TC 108/SC 5/WG 7 | Training and accreditation in the field of condition monitoring and diagnostics | 状态监测和诊断领域的培训和认证 | 活动 |
| ISO/TC 108/SC 5/WG 11 | Thermal imaging | 热成像 | 活动 |
| ISO/TC 108/SC 5/WG 15 | Ultrasonics | 超声学 | 活动 |
| ISO/TC 108/SC 5/WG 16 | Condition monitoring and diagnostics of wind turbines | 风力涡轮机的状态监测和诊断 | 活动 |
| ISO/TC 108/SC 5/WG 17 | Condition monitoring and diagnostics applications | 状态监测和诊断应用 | 活动 |
| ISO/TC 108/SC 5/WG 18 | Condition monitoring management | 状态监测管理 | 活动 |
| ISO/TC 108/SC 6/WG 3 | Guidance for selection of vibration generators | 选择振动发生器的指导意见 | 活动 |
| ISO/TC 109/WG 1 | Forced draught gas burners | 强制通风的气体燃烧器 | 活动 |
| ISO/TC 109/WG 2 | Forced draught oil burners | 强制通风的燃油燃烧器 | 活动 |
| ISO/TC 110/SC 2/JWG 14 | Joint ISO/TC 110/SC 2 - ISO/TC 214 WG: Multi-purpose Personnel Elevating Platforms (MPEPs) project developments | ISO/TC 110/SC 2 - ISO/TC 214联合工作组：多用途人员升降平台（MPEPs）项目的发展情况 | 活动 |
| ISO/TC 110/SC 2/WG 1 | Fork arms | 前叉臂 | 活动 |
| ISO/TC 110/SC 2/WG 2 | Safety code | 安全守则 | 活动 |
| ISO/TC 110/SC 2/WG 10 | Electrical/electronic requirements | 电气/电子要求 | 活动 |
| ISO/TC 110/SC 2/WG 11 | Stability | 稳定性 | 活动 |
| ISO/TC 110/SC 2/WG 13 | Supporting standards | 支持标准 | 活动 |
| ISO/TC 110/SC 4/WG 1 | Safety | 安全问题 | 活动 |
| ISO/TC 110/SC 4/WG 2 | Safe use requirements | 安全使用要求 | 活动 |
| ISO/TC 110/SC 4/WG 3 | Freely suspended loads | 自由悬挂的载荷 | 活动 |
| ISO/TC 110/SC 4/WG 10 | Stability | 稳定性 | 活动 |
| ISO/TC 110/SC 4/WG 11 | Sustainability | 可持续发展 | 活动 |
| ISO/TC 110/SC 5/WG 1 | Energy efficiency | 能源效率 | 活动 |
| ISO/TC 112/WG 1 | Vacuum pumps | 真空泵 | 活动 |
| ISO/TC 112/WG 2 | Vacuum instrumentation | 真空仪器 | 活动 |
| ISO/TC 112/WG 3 | Vacuum hardware | 真空硬件 | 活动 |
| ISO/TC 113/WG 7 | Dilution Gauging | 稀释测量法 | 活动 |
| ISO/TC 113/WG 8 | Hydrometry - Density of precipitation stations | 水文测量法--降水站的密度 | 活动 |
| ISO/TC 113/SC 1/WG 6 | Revision of ISO/TR 11330 | 对ISO/TR 11330的修订 | 活动 |
| ISO/TC 113/SC 1/WG 9 | Non-contact methods for measuring water surface velocity and discharge | 测量水面速度和排放的非接触方法 | 活动 |
| ISO/TC 113/SC 1/WG 10 | Revision of ISO 748 | 对ISO 748的修订 | 活动 |
| ISO/TC 113/SC 1/WG 11 | Revision of ISO/TR 24578 | 对ISO/TR 24578的修订 | 活动 |
| ISO/TC 113/SC 2/WG 6 | Rectangular, trapezoidal and U-shaped flumes | 长方形、梯形和U形水槽 | 活动 |
| ISO/TC 113/SC 2/WG 9 | Low cost baffles | 低成本的挡板 | 活动 |
| ISO/TC 113/SC 6/WG 5 | Radio活动 Methods | 放射性方法 | 活动 |
| ISO/TC 114/WG 1 | Requirements for watch batteries | 对手表电池的要求 | 活动 |
| ISO/TC 114/SC 13/WG 1 | Coatings for watch-glasses | 用于手表的涂层 | 活动 |
| ISO/TC 115/SC 2/WG 2 | Rotodynamic pumps test codes | 旋转动力泵测试代码 | 活动 |
| ISO/TC 115/SC 2/WG 4 | Rotodynamic pumps - Hydraulic performance acceptance tests using a model pump | 旋转动力泵 - 使用模型泵进行水力性能验收测试 | 活动 |
| ISO/TC 117/WG 7 | Performance testing of fans | 风机的性能测试 | 活动 |
| ISO/TC 117/WG 9 | Air curtain units | 气幕装置 | 活动 |
| ISO/TC 117/WG 10 | Vocabulary and definition of categories | 词汇和类别的定义 | 活动 |
| ISO/TC 117/WG 11 | Energy efficiency classification | 能源效率分类 | 活动 |
| ISO/TC 117/WG 12 | System effect factors | 系统影响因素 | 活动 |
| ISO/TC 117/WG 13 | Jet fans | 喷气机风扇 | 活动 |
| ISO/TC 117/WG 14 | Tolerances | 公差 | 活动 |
| ISO/TC 117/WG 15 | Computational performance predictions of fans | 风机的计算性能预测 | 活动 |
| ISO/TC 118/SC 3/WG 3 | Vibrations in hand-held tools | 手持工具的振动 | 活动 |
| ISO/TC 118/SC 3/WG 4 | Tightening of threaded fasteners | 拧紧螺纹紧固件 | 活动 |
| ISO/TC 118/SC 3/WG 7 | Safety of fastener driving tools | 紧固件驱动工具的安全性 | 活动 |
| ISO/TC 118/SC 4/WG 1 | Compressed air purity specification and compressed air treatment equipment | 压缩空气的纯度规格和压缩空气处理设备 | 活动 |
| ISO/TC 118/SC 6/WG 1 | Performance specifications | 性能规格 | 活动 |
| ISO/TC 118/SC 6/WG 2 | Safety | 安全问题 | 活动 |
| ISO/TC 118/SC 6/WG 4 | Energy management | 能源管理 | 活动 |
| ISO/TC 119/WG 3 | Revision of ISO 3252 | 对ISO 3252的修订 | 活动 |
| ISO/TC 119/SC 2/WG 18 | Development of precision statement | 制定精确声明 | 活动 |
| ISO/TC 119/SC 2/WG 23 | Green strength | 绿色力量 | 活动 |
| ISO/TC 119/SC 2/WG 24 | Inclusion testing | 纳入测试 | 活动 |
| ISO/TC 119/SC 3/WG 22 | Preparation of metallographic specimens used for porosity determination | 用于测定孔隙率的金相试样的制备 | 活动 |
| ISO/TC 119/SC 3/WG 23 | Hot isostatic pressing | 热等静压 | 活动 |
| ISO/TC 121/WG 1 | Connectors for respiratory therapy devices and accessories | 用于呼吸治疗设备和附件的连接器 | 活动 |
| ISO/TC 121/WG 3 | Cybersecurity for anaesthetic and respiratory equipment | 麻醉和呼吸系统设备的网络安全问题 | 活动 |
| ISO/TC 121/SC 1/JWG 1 | Joint ISO/TC 121/SC 1-IEC/SC 62D WG : Anaesthesia workstations | ISO/TC 121/SC 1-IEC/SC 62D联合工作小组：麻醉工作站 | 活动 |
| ISO/TC 121/SC 1/JWG 6 | Joint ISO/TC 121/SC 1- IEC/SC 62D WG : Respiratory gas monitors | ISO/TC 121/SC 1- IEC/SC 62D联合工作组：呼吸气体监测器 | 活动 |
| ISO/TC 121/SC 1/WG 9 | Anaesthetic systems | 麻醉系统 | 活动 |
| ISO/TC 121/SC 2/WG 6 | Respiratory therapy tubing and connectors | 呼吸治疗管和接头 | 活动 |
| ISO/TC 121/SC 2/WG 11 | Oxygen therapy devices | 氧气治疗设备 | 活动 |
| ISO/TC 121/SC 2/WG 12 | Voice prostheses | 语音修复器 | 活动 |
| ISO/TC 121/SC 2/WG 13 | Airway tubes and connectors | 气道管和接头 | 活动 |
| ISO/TC 121/SC 2/WG 14 | Heat and moisture control | 热量和湿度控制 | 活动 |
| ISO/TC 121/SC 2/WG 15 | Nebulizing systems and components | 雾化系统和组件 | 活动 |
| ISO/TC 121/SC 2/WG 16 | General requirements for airway devices and related equipment | 对气道装置和相关设备的一般要求 | 活动 |
| ISO/TC 121/SC 3/JWG 1 | Joint ISO/TC 121/SC 3-IEC/SC 62D WG : Critical care ventilators | ISO/TC 121/SC 3-IEC/SC 62D联合工作组：重症监护呼吸机 | 活动 |
| ISO/TC 121/SC 3/JWG 2 | Joint ISO/TC 121/SC 3-IEC/SC 62A WG : Alarm systems | ISO/TC 121/SC 3-IEC/SC 62A联合工作组：报警系统 | 活动 |
| ISO/TC 121/SC 3/JWG 5 | Joint ISO/TC 121/SC 1 and SC 3-IEC/SC 62A WG : Physiologic closed-loop controllers | ISO/TC 121/SC 1和SC 3-IEC/SC 62A联合工作小组：生理学闭环控制器 | 活动 |
| ISO/TC 121/SC 3/JWG 6 | Joint ISO/TC121/SC 3 - IEC/SC/62A JWG 6: Medical electrical equipment and medical electrical systems used in home care application | ISO/TC121/SC 3-IEC/SC/62A联合工作组6：家庭护理应用中的医疗电气设备和医疗电气系统 | 活动 |
| ISO/TC 121/SC 3/JWG 7 | Joint ISO/TC 121/SC 3-IEC/SC 62D WG : Non-invasive blood pressure monitoring equipment | ISO/TC 121/SC 3-IEC/SC 62D联合工作组：无创血压监测设备 | 活动 |
| ISO/TC 121/SC 3/JWG 8 | Joint ISO/TC 121/SC 3-IEC/SC 62D WG: Clinical Thermometers | ISO/TC 121/SC 3-IEC/SC 62D联合工作组：临床温度计 | 活动 |
| ISO/TC 121/SC 3/JWG 10 | Joint ISO/TC 121/SC 3-IEC/SC 62D WG : Oximeters | ISO/TC 121/SC 3-IEC/SC 62D联合工作小组：血氧仪 | 活动 |
| ISO/TC 121/SC 3/JWG 11 | Joint ISO/TC 121/SC 1 and SC 3-IEC/SC 62A WG: Emergency medical services equipment | ISO/TC 121/SC 1和SC 3-IEC/SC 62A联合工作小组：紧急医疗服务设备 | 活动 |
| ISO/TC 121/SC 3/JWG 12 | Joint ISO/TC 121/SC 3-IEC/SC 62D WG: Home respiratory equipment | ISO/TC 121/SC 3-IEC/SC 62D联合工作小组：家用呼吸设备 | 活动 |
| ISO/TC 121/SC 3/JWG 14 | Joint ISO/TC 121/SC 3-IEC/SC 62D WG: Electromedical diagnostic and patient monitoring equipment | ISO/TC 121/SC 3-IEC/SC 62D联合工作组：电子医疗诊断和病人监测设备 | 活动 |
| ISO/TC 121/SC 3/WG 13 | Biocompatibility of respiratory gas pathways | 呼吸道气体通路的生物相容性 | 活动 |
| ISO/TC 121/SC 3/WG 15 | Infant cardiorespiratory monitors | 婴儿心肺监测仪 | 活动 |
| ISO/TC 121/SC 3/WG 16 | User-powered resuscitators | 用户供电的抢救器 | 活动 |
| ISO/TC 121/SC 4/WG 1 | Respiratory equipment vocabulary | 呼吸系统设备词汇 | 活动 |
| ISO/TC 121/SC 4/WG 2 | High frequency ventilation | 高频通风 | 组建 |
| ISO/TC 121/SC 6/WG 3 | Flow Metering Devices | 流量计量装置 | 活动 |
| ISO/TC 121/SC 6/WG 4 | Medical gas pipeline systems | 医疗气体管道系统 | 活动 |
| ISO/TC 121/SC 6/WG 5 | Transportable liquid oxygen systems for medical use | 用于医疗的可运输液态氧系统 | 活动 |
| ISO/TC 121/SC 6/WG 6 | Medical Supply Units | 医疗供应单位 | 活动 |
| ISO/TC 121/SC 6/WG 7 | Plume evacuation systems | 烟雾疏散系统 | 活动 |
| ISO/TC 121/SC 6/WG 8 | Pressure regulators | 压力调节器 | 活动 |
| ISO/TC 122/WG 5 | Terminology and vocabulary | 术语和词汇 | 活动 |
| ISO/TC 122/WG 9 | Accessible design for packaging | 包装的无障碍设计 | 活动 |
| ISO/TC 122/WG 12 | Supply chain applications of logistics technology | 物流技术的供应链应用 | 活动 |
| ISO/TC 122/WG 16 | Temperature controlled product packaging | 温度控制的产品包装 | 活动 |
| ISO/TC 122/WG 18 | 活动 and intelligent packaging | 主动和智能包装 | 活动 |
| ISO/TC 122/SC 3/WG 3 | Child resistant containers | 防治儿童的容器 | 活动 |
| ISO/TC 122/SC 3/WG 8 | Transport packages for dangerous goods | 危险货物的运输包装 | 活动 |
| ISO/TC 122/SC 3/WG 11 | Paper bags and paper sacks | 纸袋和纸袋 | 活动 |
| ISO/TC 122/SC 3/WG 12 | FIBCs for non-dangerous goods | 用于非危险品的FIBC | 活动 |
| ISO/TC 122/SC 3/WG 13 | Label testing | 标签测试 | 活动 |
| ISO/TC 122/SC 4/WG 9 | Guide on implementation of ISO 1860X-standard | ISO 1860X标准的实施指南 | 活动 |
| ISO/TC 122/SC 4/WG 10 | Express packaging | 快递包装 | 活动 |
| ISO/TC 123/SC 2/WG 10 | Plain bearings – plastic overlay PTFE/POM | 滑动轴承--塑料覆层PTFE/POM | 活动 |
| ISO/TC 123/SC 5/WG 7 | Quality control techniques and inspection of geometrical and material quality characteristics | 质量控制技术和对几何和材料质量特性的检查 | 活动 |
| ISO/TC 126/WG 19 | Revision of ISO 15592-3 | 对ISO 15592-3的修订 | 活动 |
| ISO/TC 126/WG 22 | Tobacco heating systems | 烟草加热系统 | 活动 |
| ISO/TC 126/WG 23 | Revision of ISO 3402 | 对ISO 3402的修订 | 活动 |
| ISO/TC 126/SC 3/WG 3 | Analytical methods for the testing of emissions of vapour products | 测试蒸气产品排放的分析方法 | 活动 |
| ISO/TC 126/SC 3/WG 4 | Requirements and test methods for electronic cigarette devices | 电子香烟设备的要求和测试方法 | 活动 |
| ISO/TC 127/WG 8 | Sustainability | 可持续发展 | 活动 |
| ISO/TC 127/WG 17 | Rechargeable Energy Storage System (RESS) application for EMM (ISO 5757) | 充电式储能系统（RESS）应用于EMM（ISO 5757） | 活动 |
| ISO/TC 127/SC 1/WG 5 | Visibility | 可见性 | 活动 |
| ISO/TC 127/SC 1/WG 6 | Earth-moving machinery - Test methods for energy use | 推土机 - 能源使用的测试方法 | 活动 |
| ISO/TC 127/SC 1/WG 13 | Object detection systems and visual aids | 物体探测系统和视觉辅助工具 | 活动 |
| ISO/TC 127/SC 2/JWG 28 | Joint ISO/TC 127/SC 2 - ISO/TC 82/SC 8 - ISO/TC 195 WG: Collision awareness and avoidance | ISO/TC 127/SC 2 - ISO/TC 82/SC 8 - ISO/TC 195联合工作组：碰撞意识和避免碰撞 | 活动 |
| ISO/TC 127/SC 2/JWG 31 | Joint ISO/TC 127/SC 2 - ISO/TC 23/SC 15 WG: Operator protective structure material requirements | ISO/TC 127/SC 2 - ISO/TC 23/SC 15联合工作组：操作员保护结构材料要求 | 活动 |
| ISO/TC 127/SC 2/WG 12 | Joint ISO/TC 127/SC 2 - ISO/TC 108/SC 4 WG: Whole body vibration | ISO/TC 127/SC 2 - ISO/TC 108/SC 4联合工作组：全身振动 | 活动 |
| ISO/TC 127/SC 2/WG 13 | Dumper trainer seat/enclosure | 翻斗车培训师座椅/围栏 | 活动 |
| ISO/TC 127/SC 2/WG 15 | Earth-moving machinery - Fire prevention | 推土机 - 防火 | 活动 |
| ISO/TC 127/SC 2/WG 16 | Joint ISO/TC 127/SC 2 - ISO/TC 195 WG: Electromagnetic compatibility (EMC) of Earthmoving and building construction machinery | ISO/TC 127/SC 2-ISO/TC 195联合工作组：推土机和建筑施工机械的电磁兼容性（EMC） | 活动 |
| ISO/TC 127/SC 2/WG 22 | Joint ISO/TC 127/SC 2 - ISO/TC 82 - ISO/TC 82/SC 8 WG: Autonomous machine safety | ISO/TC 127/SC 2 - ISO/TC 82 - ISO/TC 82/SC 8联合工作组：自主机器安全 | 活动 |
| ISO/TC 127/SC 2/WG 24 | Control system functional safety | 控制系统功能安全 | 活动 |
| ISO/TC 127/SC 2/WG 30 | Revision of 6683 | 6683号文件的修订 | 活动 |
| ISO/TC 127/SC 2/WG 32 | Material handling arms on loaders and backhoe loaders | 装载机和挖掘装载机上的材料处理臂 | 活动 |
| ISO/TC 127/SC 3/JWG 11 | Joint ISO/TC 127/SC 3 - ISO/TC 110/SC 4 WG: Lighting, signalling and marking Lights, and reflex-reflector devices | ISO/TC 127/SC 3 - ISO/TC 110/SC 4联合工作组：照明、信号和标记 灯和反射器装置 | 活动 |
| ISO/TC 127/SC 3/JWG 16 | Joint ISO/TC 127/SC 3 - ISO/TC 82/SC 8 - ISO/TC 23/SC 19 - ISO/TC 22/SC 31 - ISO/TC 23/SC 15 WG: Secure high speed mobile data communication | ISO/TC 127/SC 3 - ISO/TC 82/SC 8 - ISO/TC 23/SC 19 - ISO/TC 22/SC 31 - ISO/TC 23/SC 15联合工作组：安全高速移动数据通信 | 活动 |
| ISO/TC 127/SC 3/WG 5 | Worksite data exchange | 工作场所数据交换 | 活动 |
| ISO/TC 127/SC 3/WG 9 | Safety of electric drive and hybrid electronic components and systems | 电力驱动和混合动力电子元件和系统的安全性 | 活动 |
| ISO/TC 127/SC 3/WG 12 | Revision of ISO 6405: Symbols for operator controls and other displays | ISO 6405的修订：操作员控制和其他显示器的符号 | 活动 |
| ISO/TC 127/SC 3/WG 13 | Operator's Manual | 操作手册 | 活动 |
| ISO/TC 127/SC 3/WG 15 | Visual display of machine operation (Revision of ISO 6011) | 机器操作的视觉显示（ISO 6011的修订版） | 活动 |
| ISO/TC 127/SC 4/WG 3 | Rollers and land-fill compactors (revision of ISO 8811) | 滚筒和填土压实机（ISO 8811的修订版） | 活动 |
| ISO/TC 127/SC 4/WG 5 | Revision of ISO 6165 | 对ISO 6165的修订 | 活动 |
| ISO/TC 127/SC 4/WG 6 | Taxonomy | 分类法 | 活动 |
| ISO/TC 130/JWG 7 | Joint TC 130 - ICC WG: colour management | Joint TC 130 - ICC WG：色彩管理 | 活动 |
| ISO/TC 130/JWG 14 | Joint TC 130 - TC 42 - ISO/IEC JTC 1/SC 28 WG: Print quality measurement methods | Joint TC 130 - TC 42 - ISO/IEC JTC 1/SC 28 WG: 印刷质量测量方法 | 活动 |
| ISO/TC 130/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 130/WG 2 | Prepress data exchange | 印前数据交换 | 活动 |
| ISO/TC 130/WG 3 | Process control and related metrology | 过程控制和相关计量学 | 活动 |
| ISO/TC 130/WG 4 | Media and materials | 媒体和材料 | 活动 |
| ISO/TC 130/WG 5 | Ergonomics - Safety | 工效学--安全 | 活动 |
| ISO/TC 130/WG 10 | Management of security printing processes | 安全印刷流程的管理 | 活动 |
| ISO/TC 130/WG 11 | Environmental impact of graphic technology | 图形技术的环境影响 | 活动 |
| ISO/TC 130/WG 12 | Postpress | 驿站 | 活动 |
| ISO/TC 131/WG 1 | Accumulators | 蓄能器 | 活动 |
| ISO/TC 131/WG 4 | Determination of the reliability of pneumatic components by testing | 通过测试确定气动元件的可靠性 | 活动 |
| ISO/TC 131/SC 1/WG 1 | Graphical symbols and circuit diagrams | 图形符号和电路图 | 活动 |
| ISO/TC 131/SC 1/WG 2 | Vocabulary | 词汇 | 活动 |
| ISO/TC 131/SC 1/WG 4 | Product properties and classification | 产品特性和分类 | 活动 |
| ISO/TC 131/SC 3/WG 1 | Hydraulic cylinder mounting dimensions | 液压缸安装尺寸 | 活动 |
| ISO/TC 131/SC 3/WG 2 | Pneumatic cylinder mounting dimensions | 气压缸安装尺寸 | 活动 |
| ISO/TC 131/SC 4/WG 1 | Ports and connector stud ends | 端口和连接器螺柱末端 | 活动 |
| ISO/TC 131/SC 4/WG 2 | Flange ports and flange connectors | 法兰盘口和法兰盘连接器 | 活动 |
| ISO/TC 131/SC 4/WG 4 | Hydraulic and pneumatic quick-action couplings | 液压和气动快速接头 | 活动 |
| ISO/TC 131/SC 4/WG 6 | Methods for connecting hose fittings and tubes to connectors | 软管配件和管子与连接器的连接方法 | 活动 |
| ISO/TC 131/SC 4/WG 9 | Pneumatic tubing and connectors | 气动管和连接器 | 活动 |
| ISO/TC 131/SC 5/WG 2 | Hydraulic control products | 液压控制产品 | 活动 |
| ISO/TC 131/SC 5/WG 3 | Pneumatic control products | 气动控制产品 | 活动 |
| ISO/TC 131/SC 5/WG 5 | Treatment of air | 空气的处理 | 活动 |
| ISO/TC 131/SC 6/WG 1 | Sampling, contamination analysis and reporting | 取样、污染分析和报告 | 活动 |
| ISO/TC 131/SC 6/WG 2 | Filter and separator evaluation | 过滤器和分离器的评估 | 活动 |
| ISO/TC 131/SC 7/WG 3 | Design criteria for standard O-ring applications | 标准O型圈应用的设计标准 | 活动 |
| ISO/TC 131/SC 7/WG 4 | Rotary shaft lip type seals | 旋转轴唇式密封 | 活动 |
| ISO/TC 131/SC 7/WG 10 | Low temperature sealing capability of elastomeric seals | 弹性密封件的低温密封能力 | 活动 |
| ISO/TC 131/SC 8/WG 1 | Hydraulic component and system sound measurement | 液压元件和系统的声音测量 | 活动 |
| ISO/TC 131/SC 8/WG 11 | Pressure rating | 压力等级 | 活动 |
| ISO/TC 131/SC 8/WG 13 | Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance | 正排量泵、电机和整体传动装置 - 测试和介绍基本稳态性能的方法 | 活动 |
| ISO/TC 131/SC 9/WG 1 | Hydraulic systems | 液压系统 | 活动 |
| ISO/TC 131/SC 9/WG 2 | Pneumatic systems | 气动系统 | 活动 |
| ISO/TC 132/WG 1 | Determination of manganese content of manganese ores | 锰矿石中锰含量的测定 | 活动 |
| ISO/TC 132/WG 2 | Vanadium alloy - technical conditions and inspections | 钒合金 - 技术条件和检查 | 活动 |
| ISO/TC 132/WG 3 | Chromium ores and concentrates - Determination of chromium content - Titrimetric method | 铬矿石和精矿 - 铬含量的测定 - 滴定法 | 活动 |
| ISO/TC 132/WG 4 | Ferrotitanium— Determination of titanium content— Titrimetric method | 钛铁- 钛含量的测定- 滴定法 | 活动 |
| ISO/TC 133/WG 1 | Body measurement | 身体测量 | 活动 |
| ISO/TC 133/WG 2 | Digital Fitting | 数字配件 | 活动 |
| ISO/TC 133/WG 3 | Measurement indicators | 测量指标 | 活动 |
| ISO/TC 134/WG 1 | Fertilizers | 肥料 | 活动 |
| ISO/TC 134/WG 3 | Vocabulary and statistics | 词汇和统计 | 活动 |
| ISO/TC 134/WG 4 | Mineral soil amendments | 矿物性土壤改良剂 | 活动 |
| ISO/TC 134/WG 5 | Microbiology | 微生物学 | 活动 |
| ISO/TC 134/WG 6 | Beneficial substances (including biostimulants) | 有益物质（包括生物刺激剂） | 活动 |
| ISO/TC 135/WG 1 | General terms and definitions | 一般术语和定义 | 活动 |
| ISO/TC 135/SC 3/WG 5 | Ultrasonic test equipment | 超声波测试设备 | 活动 |
| ISO/TC 135/SC 3/WG 6 | Inspection using guided waves | 使用导波进行检查 | 活动 |
| ISO/TC 135/SC 3/WG 7 | Basic principles | 基本原则 | 活动 |
| ISO/TC 135/SC 6/WG 1 | Leak testing in pressured vessels and underground pipelines using radio活动 tracer methods | 使用放射性示踪法对压力容器和地下管线进行泄漏测试 | 活动 |
| ISO/TC 135/SC 7/WG 10 | Visual acuity | 视觉敏锐度 | 活动 |
| ISO/TC 135/SC 8/WG 1 | Terminology and vocabulary | 术语和词汇 | 活动 |
| ISO/TC 135/SC 8/WG 2 | NDT-IRT-General principles | NDT-IRT-一般原则 | 活动 |
| ISO/TC 135/SC 8/WG 3 | NDT-IR-System and equipment | NDT-IR-系统和设备 | 活动 |
| ISO/TC 135/SC 8/WG 4 | NDT-IR-Guidelines for examination of electrical installations | NDT-IR-电气装置检查指南 | 活动 |
| ISO/TC 135/SC 9/WG 8 | Acoustic emission testing of metallic structures | 金属结构的声发射测试 | 活动 |
| ISO/TC 135/SC 9/WG 10 | Acoustic emission testing of atmospheric pressure storage tank | 常压储罐的声发射测试 | 活动 |
| ISO/TC 135/SC 9/WG 11 | Leak detection by acoustic emission | 通过声发射进行渗漏检测 | 活动 |
| ISO/TC 136/WG 1 | Chairs - Methods of test | 椅子 - 测试方法 | 活动 |
| ISO/TC 136/WG 2 | Tables - Methods of test | 表格 - 试验方法 | 活动 |
| ISO/TC 136/WG 3 | Storage units - Test methods for determination of strength and durability | 储存单元-确定强度和耐久性的测试方法 | 活动 |
| ISO/TC 136/WG 4 | Beds - Methods of test | 床 - 测试方法 | 活动 |
| ISO/TC 136/WG 6 | Children's and nursery furniture | 儿童和托儿所家具 | 活动 |
| ISO/TC 136/WG 7 | Mattresses – Methods of test | 床垫 - 测试方法 | 活动 |
| ISO/TC 136/WG 8 | Furniture surfaces - Methods of test | 家具表面 - 测试方法 | 活动 |
| ISO/TC 136/WG 9 | Hardware for furniture – Methods of test | 家具用五金件 - 测试方法 | 活动 |
| ISO/TC 138/SC 1/WG 4 | Plastics piping systems for underground drainage and sewerage | 用于地下排水和污水处理的塑料管道系统 | 活动 |
| ISO/TC 138/SC 1/WG 6 | Specific test methods for soil, waste and drainage plastic piping systems | 土壤、废物和排水塑料管道系统的具体测试方法 | 活动 |
| ISO/TC 138/SC 2/WG 1 | Plastics piping systems for hot and cold water applications | 热水和冷水应用的塑料管道系统 | 活动 |
| ISO/TC 138/SC 2/WG 3 | PVC piping systems for water supply | 供水用的PVC管道系统 | 活动 |
| ISO/TC 138/SC 2/WG 4 | PE piping systems for water supply | 供水用的PE管道系统 | 活动 |
| ISO/TC 138/SC 3/WG 1 | Chemical resistance of pipes and fittings of thermoplastics materials | 热塑性材料的管材和管件的耐化学性 | 活动 |
| ISO/TC 138/SC 3/WG 7 | Revision of industrial application standards | 工业应用标准的修订 | 活动 |
| ISO/TC 138/SC 3/WG 8 | Polyethylene reinforced with short glass fibres (PE-sGF) piping systems for industrial applications | 用于工业应用的短玻璃纤维增强聚乙烯（PE-sGF）管道系统 | 活动 |
| ISO/TC 138/SC 4/WG 1 | Mechanical fittings | 机械配件 | 活动 |
| ISO/TC 138/SC 4/WG 2 | Fusion of PE Pipe Systems | 聚乙烯管道系统的融合 | 活动 |
| ISO/TC 138/SC 4/WG 3 | PE Pipe Systems | 聚乙烯管道系统 | 活动 |
| ISO/TC 138/SC 4/WG 7 | Polyamid Pipe Systems | 聚酰胺管道系统 | 活动 |
| ISO/TC 138/SC 5/WG 5 | Polyolefin pipes | 聚烯烃管道 | 活动 |
| ISO/TC 138/SC 5/WG 10 | Extrapolation | 外推法 | 活动 |
| ISO/TC 138/SC 5/WG 12 | Polyolefin pipe fitting assemblies | 聚烯烃管接头组件 | 活动 |
| ISO/TC 138/SC 5/WG 17 | Alternative test methods | 替代测试方法 | 活动 |
| ISO/TC 138/SC 5/WG 20 | Slow crack growth (SCG) | 缓慢裂纹增长（SCG） | 活动 |
| ISO/TC 138/SC 5/WG 22 | Thermoplastics pipes for the transport of fluids | 用于输送流体的热塑性塑料管 | 活动 |
| ISO/TC 138/SC 6/WG 1 | Methods of test | 测试方法 | 活动 |
| ISO/TC 138/SC 6/WG 3 | Specifications for pipe systems | 管道系统的规格 | 活动 |
| ISO/TC 138/SC 6/WG 5 | Installation | 安装 | 活动 |
| ISO/TC 138/SC 8/WG 1 | Classification, general information and assessment of conformity items: ISO 11295, ISO/TS 23818-1, -2 & -3 & -4 | 分类、一般信息和评估合格项目ISO 11295, ISO/TS 23818-1, -2 & -3 & -4 | 活动 |
| ISO/TC 138/SC 8/WG 2 | Systems for rehabilitation of drainage, sewerage and water supply networks | 排水、排污和供水管网的修复系统 | 活动 |
| ISO/TC 138/SC 8/WG 3 | Plastics piping systems for rehabilitation of underground water supply networks | 用于修复地下供水管网的塑料管道系统 | 活动 |
| ISO/TC 138/SC 8/WG 4 | ystems for rehabilitation of gas supply networks items: ISO 11301-1 (PE material) | 用于恢复供气网络的系统项目ISO 11301-1 (PE材料) | 活动 |
| ISO/TC 138/SC 8/WG 7 | Systems for renovation of drainage, sewerage and water supply networks using thermoplastic composite materials items: ISO 11300-4 (Thermoplastic composite materials), ISO/AWI 11298-11 | 使用热塑性复合材料的排水、排污和供水管网改造系统项目ISO 11300-4（热塑复合材料），ISO/AWI 11298-11 | 活动 |
| ISO/TC 142/JWG 10 | Joint ISO/TC 142 - ISO/TC 85/SC 2 WG: Aerosol filters for nuclear applications | ISO/TC 142 - ISO/TC 85/SC 2联合工作组：核应用的气溶胶过滤器 | 活动 |
| ISO/TC 142/JWG 11 | Joint ISO/TC 142 - IEC/TC 59 WG: Portable room air cleaners for comfort applications | ISO/TC 142 - IEC/TC 59联合工作组：用于舒适性应用的便携式室内空气净化器 | 活动 |
| ISO/TC 142/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 142/WG 2 | UV-C technology | 紫外线-C技术 | 活动 |
| ISO/TC 142/WG 3 | General ventilation filters | 普通通风过滤器 | 活动 |
| ISO/TC 142/WG 4 | HEPA and ULPA filters | HEPA和ULPA过滤器 | 活动 |
| ISO/TC 142/WG 5 | Dust collectors, droplet separators and purifiers | 集尘器、液滴分离器和净化器 | 活动 |
| ISO/TC 142/WG 7 | Cleanable filter media used in industrial applications | 工业应用中使用的可清洁的过滤介质 | 活动 |
| ISO/TC 142/WG 8 | Gas-phase air cleaning devices | 气相空气净化装置 | 活动 |
| ISO/TC 142/WG 9 | Particulate air filter intake systems for rotary machinery and stationary internal combustion engines | 用于旋转机械和固定式内燃机的微粒空气过滤器进气系统 | 活动 |
| ISO/TC 142/WG 12 | Sustainability of air cleaning equipment and media | 空气净化设备和介质的可持续性 | 活动 |
| ISO/TC 142/WG 13 | Biological equipment for waste gas treatment | 用于废气处理的生物设备 | 活动 |
| ISO/TC 145/WG 7 | Testing of the usability of graphical symbols | 测试图形符号的实用性 | 活动 |
| ISO/TC 145/SC 1/WG 4 | Public information symbols (Revision of ISO 7001) | 公共信息符号（ISO 7001的修订版） | 活动 |
| ISO/TC 145/SC 1/WG 5 | Public information guidance systems | 公共信息指导系统 | 活动 |
| ISO/TC 145/SC 2/WG 1 | Safety identification, shapes, symbols and colours | 安全识别、形状、符号和颜色 | 活动 |
| ISO/TC 145/SC 2/WG 6 | Safety identification for the content of piping systems and tanks | 对管道系统和罐体内容的安全鉴定 | 活动 |
| ISO/TC 145/SC 2/WG 7 | Natural disaster safety way guidance system | 自然灾害安全方式指导系统 | 活动 |
| ISO/TC 145/SC 3/WG 1 | Coordination and registration of graphical symbols for use on equipment | 协调和登记设备上使用的图形符号 | 活动 |
| ISO/TC 146/SC 1/WG 30 | GHG energy-intensive industries – Specific sectors | 温室气体能源密集型产业 - 具体部门 | 活动 |
| ISO/TC 146/SC 1/WG 34 | Revision of ISO 10849 and ISO 7935 | 对ISO 10849和ISO 7935的修订 | 活动 |
| ISO/TC 146/SC 1/WG 35 | Sampling and determination of mercury in flue gas using chemical absorption method | 采用化学吸收法对烟气中的汞进行采样和测定 | 活动 |
| ISO/TC 146/SC 1/WG 36 | Revision of ISO 16911 | 对ISO 16911的修订 | 活动 |
| ISO/TC 146/SC 1/WG 37 | Revision of ISO 13271 | 对ISO 13271的修订 | 活动 |
| ISO/TC 146/SC 2/WG 1 | Particle size-selective sampling and analysis | 颗粒大小的选择性取样和分析 | 活动 |
| ISO/TC 146/SC 2/WG 2 | Inorganic particulate matter | 无机颗粒物 | 活动 |
| ISO/TC 146/SC 2/WG 3 | Gases | 气体 | 活动 |
| ISO/TC 146/SC 2/WG 4 | Organic vapours | 有机蒸气 | 活动 |
| ISO/TC 146/SC 2/WG 5 | Inorganic fibres | 无机纤维 | 休眠 |
| ISO/TC 146/SC 2/WG 7 | Silica | 硅石 | 活动 |
| ISO/TC 146/SC 2/WG 8 | Assessment of contamination of skin and surfaces from airborne chemicals | 评估空气中的化学品对皮肤和表面的污染情况 | 活动 |
| ISO/TC 146/SC 2/WG 9 | Sampling pump performance | 采样泵的性能 | 活动 |
| ISO/TC 146/SC 2/WG 10 | Terminology and Quality Control in Workplace Air | 工作场所空气中的术语和质量控制 | 活动 |
| ISO/TC 146/SC 3/WG 1 | Determination of asbestos fibre content | 石棉纤维含量的测定 | 活动 |
| ISO/TC 146/SC 3/WG 22 | Measurement of substances in ambient air from transportation sources | 测量来自运输源的环境空气中的物质 | 活动 |
| ISO/TC 146/SC 4/WG 1 | Terminology | 术语 | 休眠 |
| ISO/TC 146/SC 4/WG 2 | Uncertainty of air quality measurements | 空气质量测量的不确定性 | 休眠 |
| ISO/TC 146/SC 4/WG 9 | Validation of measurement methods | 测量方法的验证 | 活动 |
| ISO/TC 146/SC 5/WG 6 | Lidar | 激光雷达 | 活动 |
| ISO/TC 146/SC 5/WG 7 | Weather radar | 天气雷达 | 活动 |
| ISO/TC 146/SC 5/WG 8 | Radar wind profiler | 雷达风廓线仪 | 活动 |
| ISO/TC 146/SC 5/WG 9 | Visibility sensors | 能见度传感器 | 活动 |
| ISO/TC 146/SC 5/WG 10 | Snow depth sensors | 雪深传感器 | 活动 |
| ISO/TC 146/SC 5/WG 11 | Radiosonde | 无线电探空仪 | 活动 |
| ISO/TC 146/SC 6/WG 3 | Determination of volatile organic compounds (VOCs) in indoor air | 测定室内空气中的挥发性有机化合物（VOCs） | 活动 |
| ISO/TC 146/SC 6/WG 10 | Microbial contaminants | 微生物污染物 | 活动 |
| ISO/TC 146/SC 6/WG 13 | Joint ISO/TC 146/SC 6 - ISO/TC 22 WG: Determination of volatile organic compounds in car interiors | ISO/TC 146/SC 6 - ISO/TC 22联合工作组：汽车内饰中挥发性有机化合物的测定 | 活动 |
| ISO/TC 146/SC 6/WG 17 | Sensory testing of indoor air | 室内空气的感官测试 | 活动 |
| ISO/TC 146/SC 6/WG 18 | Flame retardants | 阻燃剂 | 活动 |
| ISO/TC 146/SC 6/WG 20 | Determination of phthalates | 邻苯二甲酸盐的测定 | 活动 |
| ISO/TC 146/SC 6/WG 21 | Strategies for the measurement of airborne particles | 测量空气中颗粒物的策略 | 活动 |
| ISO/TC 146/SC 6/WG 22 | Brominated flame retardants | 溴化阻燃剂 | 活动 |
| ISO/TC 146/SC 6/WG 24 | Indoor Air Quality management system | 室内空气质量管理系统 | 活动 |
| ISO/TC 146/SC 6/WG 25 | Testing air cleaners by the assessment of perceived air quality | 通过评估感知的空气质量来测试空气净化器 | 活动 |
| ISO/TC 147/SC 2/JWG 1 | Joint ISO/TC 147/SC 2 - ISO/TC 61/SC 14 WG: Plastics (including microplastics) in waters and related matrices | ISO/TC 147/SC 2 - ISO/TC 61/SC 14联合工作组：水和相关基质中的塑料（包括微塑料） | 活动 |
| ISO/TC 147/SC 2/WG 33 | Ion chromatography methods | 离子色谱法 | 活动 |
| ISO/TC 147/SC 2/WG 48 | QA/QC (Quality assurance/Quality control) | QA/QC (质量保证/质量控制) | 活动 |
| ISO/TC 147/SC 2/WG 66 | Cyanide | 氰化物 | 活动 |
| ISO/TC 147/SC 2/WG 70 | TOC, DOC, TNb, DNb | TOC, DOC, TNb, DNb | 活动 |
| ISO/TC 147/SC 2/WG 76 | HBCD LC-MS/MS | 六溴环十二烷 LC-MS/MS | 活动 |
| ISO/TC 147/SC 2/WG 79 | Flow immunosensor dioxins | 流动免疫传感器二恶英 | 活动 |
| ISO/TC 147/SC 2/WG 81 | TN, nitrate, ammonium using cell tests | 使用细胞测试的TN、硝酸盐、铵 | 活动 |
| ISO/TC 147/SC 2/WG 82 | Cr(VI) and Cr(III) – LC-ICP-MS | 六价铬和三价铬--LC-ICP-MS | 活动 |
| ISO/TC 147/SC 2/WG 83 | Application of ICP-MS | ICP-MS的应用 | 活动 |
| ISO/TC 147/SC 2/WG 84 | Estrogens using MS based methods | 使用基于MS的方法检测雌激素 | 活动 |
| ISO/TC 147/SC 3/WG 13 | Gamma spectrometry | 伽马光谱法 | 活动 |
| ISO/TC 147/SC 3/WG 14 | ICP/MS | ICP/MS | 活动 |
| ISO/TC 147/SC 3/WG 15 | Liquid scintillation counting and proportional counting | 液体闪烁计数和比例计数 | 活动 |
| ISO/TC 147/SC 3/WG 16 | Alpha spectrometry | 阿尔法光谱法 | 活动 |
| ISO/TC 147/SC 4/WG 17 | Legionella by PCR | 通过PCR检测军团菌 | 活动 |
| ISO/TC 147/SC 4/WG 18 | E. coli | 大肠杆菌 | 活动 |
| ISO/TC 147/SC 4/WG 22 | Quality control of membrane filters | 膜过滤器的质量控制 | 活动 |
| ISO/TC 147/SC 4/WG 25 | Waterborne and nosocomial bacteria | 水源性和非源性细菌 | 活动 |
| ISO/TC 147/SC 4/WG 26 | SARS-CoV-2 in wastewater | 废水中的SARS-CoV-2 | 活动 |
| ISO/TC 147/SC 4/WG 27 | Culturable microorganisms | 可培养的微生物 | 活动 |
| ISO/TC 147/SC 4/WG 28 | Quality control and validation of PCR methods | PCR方法的质量控制和验证 | 活动 |
| ISO/TC 147/SC 4/WG 29 | Enterococci | 肠球菌 | 活动 |
| ISO/TC 147/SC 5/WG 5 | Toxicity - Algae and aquatic plants | 毒性 - 藻类和水生植物 | 活动 |
| ISO/TC 147/SC 5/WG 9 | Genotoxicity and endocrine effects | 遗传毒性和内分泌影响 | 活动 |
| ISO/TC 147/SC 5/WG 12 | Key ecotoxicity testing issues | 关键的生态毒性测试问题 | 活动 |
| ISO/TC 147/SC 6/WG 1 | Sampling management | 采样管理 | 活动 |
| ISO/TC 147/SC 6/WG 3 | Preservation and handling of samples | 样品的保存和处理 | 活动 |
| ISO/TC 147/SC 6/WG 14 | Waste waters | 废水 | 活动 |
| ISO/TC 147/SC 6/WG 15 | Sampling for oceanic carbon dioxide in sea water | 对海水中的海洋性二氧化碳进行采样 | 活动 |
| ISO/TC 147/SC 6/WG 16 | Sampling for microplastics | 微塑料的取样 | 活动 |
| ISO/TC 149/SC 1/WG 13 | Revision of the series of ISO 4210:2014 and ISO 8098:2014 | 对ISO 4210:2014和ISO 8098:2014系列的修订 | 活动 |
| ISO/TC 149/SC 1/WG 16 | Revision of ISO 11243:2016 | 对ISO 11243:2016的修订 | 活动 |
| ISO/TC 149/SC 1/WG 17 | Revision of ISO 6742 Part 1 to 5: 2015 | 对ISO 6742第1至5部分的修订：2015年 | 活动 |
| ISO/TC 150/JWG 1 | Joint ISO/TC 150 - ISO/TC 261 WG: Additive manufacturing in surgical implant applications | ISO/TC 150 - ISO/TC 261联合工作组：外科植入物应用中的增材制造 | 活动 |
| ISO/TC 150/WG 7 | Fundamental standards | 基本标准 | 活动 |
| ISO/TC 150/WG 8 | Breast implants | 乳房假体 | 活动 |
| ISO/TC 150/WG 10 | Use and retrieval of surgical implants | 外科植入物的使用和取回 | 活动 |
| ISO/TC 150/WG 12 | Implant coatings | 种植体涂层 | 活动 |
| ISO/TC 150/WG 13 | Absorbable implants | 可吸收的植入物 | 活动 |
| ISO/TC 150/WG 14 | Models of tissues for mechanical testing of implants | 用于植入物机械测试的组织模型 | 活动 |
| ISO/TC 150/WG 15 | Neurosurgical implants | 神经外科植入物 | 活动 |
| ISO/TC 150/WG 16 | Antimicrobial properties of implants | 植入物的抗菌性 | 活动 |
| ISO/TC 150/SC 1/WG 3 | Ceramics | 陶瓷 | 活动 |
| ISO/TC 150/SC 1/WG 4 | Metals | 金属 | 活动 |
| ISO/TC 150/SC 1/WG 5 | Plastics | 塑料制品 | 活动 |
| ISO/TC 150/SC 2/WG 1 | Cardiac valves | 心脏瓣膜 | 活动 |
| ISO/TC 150/SC 2/WG 2 | Circulatory support devices | 循环支持设备 | 活动 |
| ISO/TC 150/SC 2/WG 3 | Vascular prostheses | 血管假体 | 活动 |
| ISO/TC 150/SC 2/WG 4 | Blood gas exchangers | 血气交换器 | 活动 |
| ISO/TC 150/SC 2/WG 5 | Renal replacement, detoxification and apheresis | 肾脏替代、解毒和无偿献血 | 活动 |
| ISO/TC 150/SC 2/WG 6 | Vascular device-drug combination products | 血管装置-药物组合产品 | 活动 |
| ISO/TC 150/SC 2/WG 7 | Cardiovascular absorbable implants | 心血管可吸收植入物 | 活动 |
| ISO/TC 150/SC 4/WG 1 | Mechanical testing | 机械测试 | 活动 |
| ISO/TC 150/SC 4/WG 3 | Wear | 穿着 | 活动 |
| ISO/TC 150/SC 4/WG 4 | General requirements | 一般要求 | 活动 |
| ISO/TC 150/SC 5/WG 1 | Osteosynthesis devices | 骨合成装置 | 活动 |
| ISO/TC 150/SC 5/WG 2 | Spinal devices | 脊柱装置 | 活动 |
| ISO/TC 150/SC 6/JWG 1 | Joint ISO/TC 150/SC 6 - IEC/SC 62D WG: Cardiac pacemakers and implantable defibrillators | ISO/TC 150/SC 6 - IEC/SC 62D联合工作组：心脏起搏器和植入式除颤器 | 活动 |
| ISO/TC 150/SC 6/JWG 2 | JWG between ISO/TC 150/SC 6 and IEC/SC62B: Effects of magnetic resonance imaging on 活动 implantable medical devices | ISO/TC 150/SC 6和IEC/SC62B之间的联合工作组：磁共振成像对有源植入式医疗设备的影响 | 活动 |
| ISO/TC 150/SC 6/WG 1 | Fundamental standards | 基本标准 | 活动 |
| ISO/TC 150/SC 6/WG 3 | Cochlear implants | 人工耳蜗 | 活动 |
| ISO/TC 150/SC 6/WG 4 | Implantable infusion pumps | 植入式输液泵 | 活动 |
| ISO/TC 150/SC 6/WG 5 | Implantable neurostimulators | 植入式神经刺激器 | 活动 |
| ISO/TC 150/SC 7/WG 1 | Management of risk | 风险的管理 | 活动 |
| ISO/TC 150/SC 7/WG 3 | Tissue-engineered medical products for skeletal tissues | 骨骼组织的组织工程医疗产品 | 活动 |
| ISO/TC 153/WG 1 | Valve actuators and valve actuators attachments | 阀门执行器和阀门执行器附件 | 活动 |
| ISO/TC 153/WG 5 | Fugitive emissions | 逃逸性排放 | 活动 |
| ISO/TC 153/WG 12 | Isolating valves for low-temperature applications | 低温应用的隔离阀 | 活动 |
| ISO/TC 153/WG 15 | Automatic steam traps | 自动蒸汽疏水阀 | 活动 |
| ISO/TC 153/WG 16 | Valve actuation | 阀门驱动 | 活动 |
| ISO/TC 154/JWG 1 | Joint syntax working group (with UN/ECE) | 联合综合工作组（与联合国/欧洲经委会） | 活动 |
| ISO/TC 154/WG 5 | Representation of dates and times | 日期和时间的表述 | 活动 |
| ISO/TC 154/WG 6 | Trusted eCommunications | 值得信赖的电子通信 | 活动 |
| ISO/TC 154/WG 7 | Digital business | 数字化业务 | 活动 |
| ISO/TC 155/WG 10 | Nickel alloys analysis | 镍合金分析 | 活动 |
| ISO/TC 155/WG 13 | Analysis of ferronickel by ICP | 用ICP分析镍铁 | 活动 |
| ISO/TC 155/WG 15 | Analysis of FeNi by spark emission spectrometry | 用火花发射光谱法分析铁镍 | 活动 |
| ISO/TC 156/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 156/WG 2 | Environmentally assisted cracking | 环境辅助裂化 | 活动 |
| ISO/TC 156/WG 4 | Atmospheric corrosion testing and classification of corrosivity of atmosphere | 大气腐蚀测试和大气腐蚀性的分类 | 活动 |
| ISO/TC 156/WG 5 | Intergranular corrosion | 晶间腐蚀 | 活动 |
| ISO/TC 156/WG 6 | General principles of testing and data interpretation | 测试和数据解释的一般原则 | 活动 |
| ISO/TC 156/WG 7 | Accelerated corrosion tests | 加速腐蚀试验 | 活动 |
| ISO/TC 156/WG 9 | Corrosion testing of materials for power generation | 发电材料的腐蚀测试 | 活动 |
| ISO/TC 156/WG 10 | Cathodic protection of buried and immersed metallic structures | 埋藏和浸泡的金属结构的阴极保护 | 活动 |
| ISO/TC 156/WG 11 | Electrochemical test methods | 电化学测试方法 | 活动 |
| ISO/TC 156/WG 13 | High temperature corrosion | 高温腐蚀 | 活动 |
| ISO/TC 156/WG 14 | Tribo-corrosion | 三重腐蚀 | 活动 |
| ISO/TC 156/WG 15 | Corrosion rates of the embedded steel reinforcement in concrete | 混凝土中预埋钢筋的腐蚀率 | 活动 |
| ISO/TC 156/WG 16 | Corrosion test method for disinfectant | 消毒剂的腐蚀试验方法 | 活动 |
| ISO/TC 156/WG 17 | Corrosion in industrial cooling water | 工业冷却水中的腐蚀问题 | 活动 |
| ISO/TC 157/WG 3 | Intra-uterine devices | 子宫内装置 | 活动 |
| ISO/TC 157/WG 10 | Burst requirements | 爆裂要求 | 活动 |
| ISO/TC 157/WG 11 | Packaging integrity | 包装完整性 | 活动 |
| ISO/TC 157/WG 13 | Stability assessment | 稳定性评估 | 活动 |
| ISO/TC 157/WG 14 | Guidance on the use of condom standards | 使用安全套标准的指导意见 | 活动 |
| ISO/TC 157/WG 15 | Additional lubricants | 额外的润滑剂 | 活动 |
| ISO/TC 157/WG 17 | Synthetic Male Condoms | 合成男用避孕套 | 活动 |
| ISO/TC 157/WG 18 | Female condoms and diaphragms | 女用避孕套和避孕膜 | 活动 |
| ISO/TC 157/WG 19 | Methods for hole detection | 孔洞检测的方法 | 活动 |
| ISO/TC 157/WG 20 | Clinical trials | 临床试验 | 活动 |
| ISO/TC 157/WG 21 | Chemical residues | 化学残留物 | 活动 |
| ISO/TC 157/WG 23 | Natural rubber latex male condoms | 天然橡胶乳胶男用避孕套 | 活动 |
| ISO/TC 158/WG 2 | Quality assurance of gas analysis | 气体分析的质量保证 | 活动 |
| ISO/TC 158/WG 3 | Gravimetric methods | 重量测量法 | 活动 |
| ISO/TC 158/WG 4 | Comparison methods and certificates | 比较方法和证书 | 活动 |
| ISO/TC 159/WG 2 | Ergonomics for people with special requirements | 有特殊要求的人的人机工程学 | 活动 |
| ISO/TC 159/SC 1/WG 1 | Principles of ergonomics and ergonomic design | 人机工程学和人机工程设计的原则 | 活动 |
| ISO/TC 159/SC 1/WG 2 | Ergonomic principles related to mental work | 与脑力劳动有关的人体工程学原则 | 活动 |
| ISO/TC 159/SC 1/WG 5 | Ergonomic process standards | 人体工程学过程标准 | 活动 |
| ISO/TC 159/SC 3/WG 1 | Anthropometry | 人体测量学 | 活动 |
| ISO/TC 159/SC 3/WG 4 | Human physical strength: manual handling and force limits | 人的体力：人工搬运和力的极限 | 活动 |
| ISO/TC 159/SC 4/JWG 28 | Joint ISO/TC 159/SC 4 - ISO/IEC JTC 1/SC 7 WG: Common industry formats for usability related information | ISO/TC 159/SC 4-ISO/IEC JTC 1/SC 7联合工作组：可用性相关信息的通用工业格式 | 活动 |
| ISO/TC 159/SC 4/WG 2 | Visual display requirements | 视觉显示要求 | 活动 |
| ISO/TC 159/SC 4/WG 3 | Controls, workplace and environmental requirements | 控制、工作场所和环境要求 | 活动 |
| ISO/TC 159/SC 4/WG 5 | Interaction and presentation of information | 信息的互动和呈现 | 活动 |
| ISO/TC 159/SC 4/WG 6 | Human-centred design processes for inter活动 systems | 以人为本的互动系统设计流程 | 活动 |
| ISO/TC 159/SC 4/WG 8 | Ergonomic design of control centres | 控制中心的人体工程学设计 | 活动 |
| ISO/TC 159/SC 4/WG 9 | Tactile and haptic interaction | 触摸和触觉的互动 | 活动 |
| ISO/TC 159/SC 4/WG 12 | Image safety | 图像安全 | 活动 |
| ISO/TC 159/SC 5/WG 1 | Thermal environments | 热环境 | 活动 |
| ISO/TC 159/SC 5/WG 4 | Integrated environments | 综合环境 | 活动 |
| ISO/TC 159/SC 5/WG 5 | Physical environments for people with special requirements | 为有特殊要求的人提供物质环境 | 活动 |
| ISO/TC 159/SC 5/WG 7 | Dynamic signs and signals in physical environments | 物理环境中的动态标志和信号 | 活动 |
| ISO/TC 160/WG 1 | Basic glass products | 基本玻璃产品 | 活动 |
| ISO/TC 160/WG 2 | Toughened glass | 钢化玻璃 | 活动 |
| ISO/TC 160/WG 3 | Laminated glass | 夹层玻璃 | 活动 |
| ISO/TC 160/WG 4 | Insulating glass units | 中空玻璃单元 | 活动 |
| ISO/TC 160/WG 5 | Assembly rules and structural sealant glazing | 装配规则和结构性密封胶玻璃 | 活动 |
| ISO/TC 160/WG 6 | Safety glazing tests | 安全玻璃测试 | 活动 |
| ISO/TC 160/WG 7 | Airborne sound insulation of glazing | 玻璃的空气隔音性能 | 活动 |
| ISO/TC 160/WG 8 | Light and energy transmission properties and thermal properties of glazing | 玻璃的光和能量传输性能和热性能 | 活动 |
| ISO/TC 160/WG 9 | Glass in building - Building integrated photovoltaics | 建筑玻璃--光伏建筑一体化 | 活动 |
| ISO/TC 160/WG 10 | Vacuum glass | 真空玻璃 | 活动 |
| ISO/TC 161/WG 3 | Controls | 控制措施 | 活动 |
| ISO/TC 161/WG 4 | Multifunctional Controls | 多功能控制装置 | 活动 |
| ISO/TC 161/WG 5 | High pressure controls | 高压控制 | 活动 |
| ISO/TC 161/WG 6 | Oil controls | 石油控制 | 活动 |
| ISO/TC 162/WG 3 | Terminology | 术语 | 活动 |
| ISO/TC 162/WG 4 | Windows and doors | 窗户和门 | 活动 |
| ISO/TC 162/WG 5 | Curtain walling | 窗帘墙 | 活动 |
| ISO/TC 163/WG 4 | Joint ISO/TC 163 - ISO/TC 205 WG: Energy performance of buildings using holistic approach | ISO/TC 163 - ISO/TC 205联合工作组：使用整体方法的建筑能源性能 | 活动 |
| ISO/TC 163/SC 1/WG 2 | Guarded hot plate methods | 守护的热板方法 | 活动 |
| ISO/TC 163/SC 1/WG 8 | Moisture content and moisture permeability | 水分含量和透湿性 | 活动 |
| ISO/TC 163/SC 1/WG 15 | Thermography of buildings and industrial installations | 建筑物和工业设施的热成像 | 活动 |
| ISO/TC 163/SC 1/WG 16 | In-situ measurement of thermal resistance and thermal transmittance of opaque building elements | 不透明建筑构件的热阻和热传导的原位测量 | 活动 |
| ISO/TC 163/SC 1/WG 17 | Solar heat gain coefficient of windows and doors | 门窗的太阳辐射热获得系数 | 活动 |
| ISO/TC 163/SC 1/WG 19 | Periodic heat method for thermal diffusivity of thermal insulation | 保温材料的热扩散性的周期热法 | 活动 |
| ISO/TC 163/SC 1/WG 20 | Test methods at cryogenic temperature | 低温条件下的测试方法 | 活动 |
| ISO/TC 163/SC 1/WG 21 | Test method for Specific heat capacity of thermal insulation for buildings at elevated temperature range | 高温范围内建筑保温材料的比热容测试方法 | 活动 |
| ISO/TC 163/SC 1/WG 22 | Energy performance of underfloor air distribution systems | 地板下空气分配系统的能源性能 | 活动 |
| ISO/TC 163/SC 2/WG 4 | Industrial calculations | 工业计算 | 活动 |
| ISO/TC 163/SC 2/WG 15 | Energy Performance calculation methods | 能源性能计算方法 | 活动 |
| ISO/TC 163/SC 2/WG 16 | Hourly data for assessing the annual energy use for heating and cooling | 用于评估供暖和制冷的年度能源使用的每小时数据 | 活动 |
| ISO/TC 163/SC 2/WG 17 | Detailed calculation for thermal performance of windows, doors and shading devices | 门窗和遮阳设备的热性能的详细计算 | 活动 |
| ISO/TC 163/SC 3/WG 9 | Exterior insulation and finish systems | 外墙保温和装饰系统 | 活动 |
| ISO/TC 163/SC 3/WG 11 | Vacuum insulation panels | 真空绝缘板 | 活动 |
| ISO/TC 163/SC 3/WG 13 | Reflective insulation for buildings | 建筑物的反射性隔热材料 | 活动 |
| ISO/TC 163/SC 3/WG 14 | Building enclosure thermal performance verification and commissioning - Programme | 建筑围护结构热性能验证和调试 - 方案 | 活动 |
| ISO/TC 163/SC 3/WG 18 | Cellular glass thermal insulation products | 蜂窝玻璃保温产品 | 活动 |
| ISO/TC 163/SC 3/WG 19 | Mineral fibre mat and board thermal insulation | 矿物纤维垫和板的隔热性能 | 活动 |
| ISO/TC 163/SC 3/WG 20 | Flexible microporous thermal insulation | 灵活的微孔隔热材料 | 活动 |
| ISO/TC 163/SC 3/WG 21 | Perlite thermal insulation | 珍珠岩保温层 | 活动 |
| ISO/TC 164/WG 1 | Terminology and symbols | 术语和符号 | 活动 |
| ISO/TC 164/WG 2 | Measurement uncertainty | 测量的不确定性 | 活动 |
| ISO/TC 164/SC 1/WG 2 | Creep and stress relaxation testing | 蠕变和应力松弛测试 | 活动 |
| ISO/TC 164/SC 1/WG 4 | Conventional quasi-static tensile test procedures | 传统的准静态拉伸试验程序 | 活动 |
| ISO/TC 164/SC 1/WG 9 | Tensile testing, method in high-pressure hydrogen environment | 拉伸测试，高压氢气环境下的方法 | 活动 |
| ISO/TC 164/SC 3/WG 1 | Revision of the standard series ISO 6508 - Metallic materials - Rockwell hardness test | 修订标准系列ISO 6508 - 金属材料 - 洛氏硬度测试 | 活动 |
| ISO/TC 164/SC 3/WG 2 | Revision of the standard series ISO 6506 - Metallic materials - Brinell hardness test | 修订标准系列ISO 6506-金属材料-布氏硬度测试 | 活动 |
| ISO/TC 164/SC 3/WG 4 | Revision of ISO 14577 - Metallic materials - Instrumented indentation test for hardness and materials parameters | ISO 14577的修订--金属材料--硬度和材料参数的仪器压痕测试 | 活动 |
| ISO/TC 164/SC 3/WG 5 | Vickers hardness test - Knoop hardness test | 维氏硬度测试 - 努氏硬度测试 | 活动 |
| ISO/TC 164/SC 4/WG 2 | Pendulum impact toughness | 摆锤式冲击韧度 | 活动 |
| ISO/TC 164/SC 4/WG 3 | Fracture toughness | 断裂韧性 | 活动 |
| ISO/TC 164/SC 4/WG 4 | Advanced apparatus and analysis | 先进的仪器和分析 | 活动 |
| ISO/TC 164/SC 4/WG 5 | Fatigue testing: general conditions | 疲劳测试：一般条件 | 活动 |
| ISO/TC 164/SC 4/WG 6 | Fatigue testing: elasto-plastic strain and crack growth conditions | 疲劳测试：弹塑性应变和裂纹生长条件 | 活动 |
| ISO/TC 165/WG 2 | Structural glued wood products | 结构性胶合木制品 | 活动 |
| ISO/TC 165/WG 7 | Connections and assemblies | 连接和装配 | 活动 |
| ISO/TC 165/WG 10 | Characteristic values and design specifications | 特性值和设计规格 | 活动 |
| ISO/TC 165/WG 11 | Solid and mechanically laminated timber products | 实木和机械层压木材产品 | 活动 |
| ISO/TC 165/WG 12 | Structural use of bamboo | 竹子的结构用途 | 活动 |
| ISO/TC 166/WG 4 | Permissible limits | 允许的限度 | 活动 |
| ISO/TC 166/WG 5 | Porcelain tableware | 瓷器餐具 | 活动 |
| ISO/TC 167/WG 3 | Execution of steel structures | 钢结构的执行 | 活动 |
| ISO/TC 167/WG 4 | Structural bolting | 结构性螺栓连接 | 活动 |
| ISO/TC 168/WG 1 | Nomenclature and classification | 命名法和分类法 | 活动 |
| ISO/TC 168/WG 3 | Testing | 测试 | 活动 |
| ISO/TC 171/SC 1/WG 9 | Document management - Information stored electronically | 文件管理 - 以电子方式存储的信息 | 活动 |
| ISO/TC 171/SC 1/WG 11 | Controlled sharing of digital documents | 有控制地分享数字文件 | 活动 |
| ISO/TC 171/SC 1/WG 12 | Digital object storage component | 数字对象存储组件 | 活动 |
| ISO/TC 171/SC 2/WG 5 | Joint TC 171/SC 2 - TC 42 - TC 46/SC 11 - TC 130 WG: Document management applications - Application issues - PDF/A | 联合TC 171/SC 2-TC 42-TC 46/SC 11-TC 130工作组：文件管理应用--应用问题--PDF/A | 活动 |
| ISO/TC 171/SC 2/WG 7 | PDF/Engineering | PDF/工程 | 活动 |
| ISO/TC 171/SC 2/WG 8 | PDF specification | PDF规格 | 活动 |
| ISO/TC 171/SC 2/WG 9 | PDF universal accessibility | PDF的普遍可及性 | 活动 |
| ISO/TC 171/SC 2/WG 10 | File format guidelines | 文件格式指南 | 活动 |
| ISO/TC 171/SC 2/WG 11 | EDMS Guidelines | EDMS指南 | 活动 |
| ISO/TC 171/SC 2/WG 12 | Metadata | 元数据 | 活动 |
| ISO/TC 172/WG 1 | Reference wavelengths | 参考波长 | 活动 |
| ISO/TC 172/SC 1/WG 1 | General optical test methods | 一般的光学测试方法 | 活动 |
| ISO/TC 172/SC 1/WG 2 | Preparation of drawings for optical elements and systems | 准备光学元件和系统的图纸 | 活动 |
| ISO/TC 172/SC 1/WG 3 | Environmental test methods | 环境测试方法 | 活动 |
| ISO/TC 172/SC 3/WG 1 | Raw optical glass | 原始光学玻璃 | 活动 |
| ISO/TC 172/SC 3/WG 2 | Coatings | 涂料 | 活动 |
| ISO/TC 172/SC 3/WG 3 | Characterization of IR materials | 红外材料的表征 | 活动 |
| ISO/TC 172/SC 4/WG 2 | Telescopic devices | 伸缩式装置 | 活动 |
| ISO/TC 172/SC 5/WG 3 | Terms and definitions | 术语和定义 | 活动 |
| ISO/TC 172/SC 5/WG 6 | Endoscopes | 内窥镜 | 活动 |
| ISO/TC 172/SC 5/WG 9 | Optical performance of microscope components | 显微镜组件的光学性能 | 活动 |
| ISO/TC 172/SC 5/WG 10 | Microscope systems | 显微镜系统 | 活动 |
| ISO/TC 172/SC 6/WG 3 | Laboratory procedures for testing surveying and construction instruments | 测试测量和建筑仪器的实验室程序 | 活动 |
| ISO/TC 172/SC 6/WG 4 | Field procedures and ancillary devices | 现场程序和辅助设备 | 活动 |
| ISO/TC 172/SC 7/WG 2 | Spectacle frames | 眼镜框 | 活动 |
| ISO/TC 172/SC 7/WG 3 | Spectacle lenses | 眼镜片 | 活动 |
| ISO/TC 172/SC 7/WG 6 | Ophthalmic instruments and test methods | 眼科仪器和测试方法 | 活动 |
| ISO/TC 172/SC 7/WG 7 | Ophthalmic implants | 眼科植入物 | 活动 |
| ISO/TC 172/SC 7/WG 8 | Data interchange | 数据交换 | 活动 |
| ISO/TC 172/SC 7/WG 9 | Contact lenses | 隐形眼镜 | 活动 |
| ISO/TC 172/SC 9/JWG 3 | Joint ISO/TC 172/SC 9-IEC/TC 76 WG: Safety | ISO/TC 172/SC 9-IEC/TC 76联合工作小组：安全 | 活动 |
| ISO/TC 172/SC 9/WG 1 | Terminology and test methods for electro-optical systems | 电光系统的术语和测试方法 | 活动 |
| ISO/TC 172/SC 9/WG 4 | Laser systems for medical applications | 医疗应用的激光系统 | 活动 |
| ISO/TC 172/SC 9/WG 7 | Electro-optical systems other than lasers | 除激光器外的电光系统 | 活动 |
| ISO/TC 173/WG 1 | Assistive products for walking | 用于行走的辅助性产品 | 活动 |
| ISO/TC 173/WG 9 | Assistive products for personal hygiene | 用于个人卫生的辅助性产品 | 活动 |
| ISO/TC 173/WG 10 | Assistive products for cognitive disabilities | 用于认知障碍的辅助产品 | 活动 |
| ISO/TC 173/WG 11 | Assistive products for tissue integrity | 促进组织完整性的辅助产品 | 活动 |
| ISO/TC 173/WG 12 | General requirement | 一般要求 | 活动 |
| ISO/TC 173/WG 13 | Hoists for transfer of persons | 用于转移人员的升降机 | 活动 |
| ISO/TC 173/SC 1/WG 1 | Test methods | 测试方法 | 活动 |
| ISO/TC 173/SC 1/WG 6 | Wheelchair restraint systems | 轮椅约束系统 | 活动 |
| ISO/TC 173/SC 1/WG 10 | Requirements and test methods for electro-technical systems for wheelchairs | 轮椅电子技术系统的要求和测试方法 | 活动 |
| ISO/TC 173/SC 1/WG 11 | Wheelchair seating | 轮椅座位 | 活动 |
| ISO/TC 173/SC 2/WG 12 | Classification and terminology of assistive products for persons with disability | 残疾人辅助产品的分类和术语 | 活动 |
| ISO/TC 173/SC 3/WG 2 | Urinary absorbing aids | 吸收尿液的辅助工具 | 活动 |
| ISO/TC 173/SC 7/WG 7 | User needs survey of assistive products for persons with impaired sensory functions | 感官功能受损者的辅助产品的用户需求调查 | 活动 |
| ISO/TC 174/WG 1 | Methods for determining fineness | 确定细度的方法 | 活动 |
| ISO/TC 174/WG 2 | Diamonds, gemstones and related products | 钻石、宝石和相关产品 | 活动 |
| ISO/TC 176/WG 6 | Application of ISO 9001 in policing organization | ISO 9001在警务组织中的应用 | 活动 |
| ISO/TC 176/SC 3/WG 24 | Quality tools and their application | 质量工具及其应用 | 活动 |
| ISO/TC 176/SC 3/WG 25 | Guidance to understand and improve quality culture | 了解和改善质量文化的指导意见 | 活动 |
| ISO/TC 176/SC 3/WG 26 | Electronic commerce transactions | 电子商务交易 | 活动 |
| ISO/TC 176/SC 3/WG 27 | Measurement management systems | 测量管理系统 | 活动 |
| ISO/TC 176/SC 3/WG 28 | Organizational change management | 组织变革管理 | 活动 |
| ISO/TC 178/WG 1 | Lifts on ships | 船舶上的升降机 | 活动 |
| ISO/TC 178/WG 4 | Safety requirements and risk assessment | 安全要求和风险评估 | 活动 |
| ISO/TC 178/WG 5 | Escalators and moving walks | 自动扶梯和移动步道 | 活动 |
| ISO/TC 178/WG 6 | Lift installation | 电梯安装 | 活动 |
| ISO/TC 178/WG 8 | Electrical requirements | 电气要求 | 活动 |
| ISO/TC 178/WG 10 | Energy efficiency | 能源效率 | 活动 |
| ISO/TC 178/WG 11 | Methodology for the improvement of safety of existing passenger and goods passenger lifts | 改善现有客运和货运电梯安全的方法 | 活动 |
| ISO/TC 178/WG 12 | Cybersecurity | 网络安全 | 活动 |
| ISO/TC 178/WG 13 | New technologies | 新技术 | 活动 |
| ISO/TC 180/WG 3 | Collector components and materials | 采集器组件和材料 | 活动 |
| ISO/TC 180/WG 4 | Solar collectors | 太阳能集热器 | 活动 |
| ISO/TC 180/SC 1/WG 3 | Revision of ISO 9847 | 对ISO 9847的修订 | 活动 |
| ISO/TC 180/SC 1/WG 4 | Revision of ISO 9059:1990 and ISO 9846:1993 | 对ISO 9059:1990和ISO 9846:1993的修订 | 活动 |
| ISO/TC 181/WG 1 | Mechanical and physical properties | 机械和物理性能 | 活动 |
| ISO/TC 181/WG 6 | Phthalate plasticizers in toys | 玩具中的邻苯二甲酸酯增塑剂 | 活动 |
| ISO/TC 181/WG 7 | Age determination guidelines | 年龄确定准则 | 活动 |
| ISO/TC 181/WG 8 | Migration of certain elements | 某些元素的迁移 | 活动 |
| ISO/TC 181/WG 9 | Chemical toys | 化学玩具 | 活动 |
| ISO/TC 181/WG 10 | Microbiology | 微生物学 | 活动 |
| ISO/TC 181/WG 11 | Revision of ISO 8124-4 Safety of toys | 对ISO 8124-4玩具安全的修订 | 活动 |
| ISO/TC 181/WG 12 | Flammability | 易燃性 | 活动 |
| ISO/TC 182/WG 2 | Monitoring in Geotechnical Engineering | 岩土工程的监测 | 活动 |
| ISO/TC 182/WG 4 | Drilling and sampling methods and groundwater measurements | 钻探和取样方法以及地下水测量 | 活动 |
| ISO/TC 182/WG 7 | Cone and piezocone penetration tests | 圆锥体和压电体的渗透试验 | 活动 |
| ISO/TC 182/WG 8 | Borehole expansion tests | 钻孔膨胀试验 | 活动 |
| ISO/TC 182/WG 9 | Geotechnical aspects of geophysical methods | 地球物理方法的岩土工程方面 | 活动 |
| ISO/TC 182/WG 10 | Laboratory testing of rocks | 岩石的实验室测试 | 活动 |
| ISO/TC 182/WG 11 | Static testing of geotechnical structures | 土工结构的静力测试 | 活动 |
| ISO/TC 182/WG 12 | Standardization in geophysics | 地球物理学的标准化 | 活动 |
| ISO/TC 182/WG 13 | Laboratory testing of soils | 土壤的实验室测试 | 活动 |
| ISO/TC 183/WG 9 | Sampling of copper, lead and zinc concentrates | 铜、铅、锌精矿的取样 | 活动 |
| ISO/TC 183/WG 11 | Transportable moisture limits | 可运输的湿度限制 | 活动 |
| ISO/TC 183/WG 13 | Determination of silver in sulfide concentrates | 硫化物精矿中银的测定 | 活动 |
| ISO/TC 183/WG 16 | Fluorine in copper-, lead- and zinc-containing concentrates | 含铜、铅和锌精矿中的氟元素 | 活动 |
| ISO/TC 183/WG 24 | Determination of Fluorine and Chlorine by Ion Chromatography | 用离子色谱法测定氟和氯的含量 | 活动 |
| ISO/TC 183/WG 25 | Thallium | 铊 | 活动 |
| ISO/TC 183/WG 26 | Arsenic and other penalty elements in copper, lead and zinc concentrates | 铜、铅、锌精矿中的砷和其他惩罚元素 | 活动 |
| ISO/TC 183/WG 27 | Determination of zinc | 锌的测定 | 活动 |
| ISO/TC 184/JWG 21 | Joint ISO/TC 184 - IEC/TC 65/JWG 21 - Smart Manufacturing Reference Model(s) linked to ISO/TC 184 | ISO/TC 184 - IEC/TC 65/JWG 21 - 与ISO/TC 184相联系的智能制造参考模型（s）的联合 | 活动 |
| ISO/TC 184/WG 6 | Asset intensive industry interoperability | 资产密集型行业的互操作性 | 活动 |
| ISO/TC 184/SC 1/WG 7 | Data modelling for integration of physical devices | 用于整合物理设备的数据建模 | 活动 |
| ISO/TC 184/SC 1/WG 9 | Interfaces between manufacturing systems | 制造系统之间的接口 | 活动 |
| ISO/TC 184/SC 1/WG 10 | Numerical control systems for machine tools - Technical requirements | 机床的数控系统 - 技术要求 | 活动 |
| ISO/TC 184/SC 1/WG 11 | Reference model for cyber - Physically controlled smart machine tool systems | 网络物理控制智能机床系统的参考模型 | 活动 |
| ISO/TC 184/SC 4/JWG 16 | Joint ISO/TC 184/SC 4 - ISO/IEC JTC 1/SC 24 - ISO/TC 171/SC 2 WG: Formats for visualization and other derived forms of product data | ISO/TC 184/SC 4 - ISO/IEC JTC 1/SC 24 - ISO/TC 171/SC 2联合工作组：可视化和其他产品数据衍生形式的格式 | 活动 |
| ISO/TC 184/SC 4/JWG 24 | Joint ISO/TC 184/SC 4 - IEC SC3D WG: Use of IEC CDD for ISO data dictionaries and ontologies | ISO/TC 184/SC 4 - IEC SC3D联合工作组：将IEC CDD用于ISO数据字典和本体论 | 活动 |
| ISO/TC 184/SC 4/WG 3 | Oil, Gas, Process and Power | 石油、天然气、加工和电力 | 活动 |
| ISO/TC 184/SC 4/WG 8 | Joint ISO/TC 184/SC 4 - ISO/TC 184/SC 5 WG: Manufacturing process and management information | ISO/TC 184/SC 4 - ISO/TC 184/SC 5联合工作组：制造过程和管理信息 | 休眠 |
| ISO/TC 184/SC 4/WG 11 | Implementation methods and conformance methods | 实施方法和符合性方法 | 活动 |
| ISO/TC 184/SC 4/WG 12 | STEP product modelling and resources | STEP产品模型和资源 | 活动 |
| ISO/TC 184/SC 4/WG 13 | Industrial Data Quality | 工业数据质量 | 活动 |
| ISO/TC 184/SC 4/WG 15 | Digital manufacturing | 数字化制造 | 活动 |
| ISO/TC 184/SC 4/WG 21 | SMRL Validation Team | SMRL审定小组 | 活动 |
| ISO/TC 184/SC 4/WG 22 | Reference data validation team | 参考数据验证小组 | 活动 |
| ISO/TC 184/SC 4/WG 23 | Vocabulary validation team | 词汇审定小组 | 活动 |
| ISO/TC 184/SC 4/WG 25 | ISO CDD Validation Team | ISO CDD验证团队 | 活动 |
| ISO/TC 184/SC 5/JWG 5 | Joint WG ISO/TC 184/SC 5 - IEC/SC 65E : Enterprise-control system integration | ISO/TC 184/SC 5-IEC/SC 65E联合工作组：企业-控制系统集成 | 活动 |
| ISO/TC 184/SC 5/WG 1 | Modelling and architecture | 建模和架构 | 活动 |
| ISO/TC 184/SC 5/WG 4 | Manufacturing software and its environment | 制造业软件及其环境 | 活动 |
| ISO/TC 184/SC 5/WG 5 | Open systems application frameworks | 开放式系统应用框架 | 活动 |
| ISO/TC 184/SC 5/WG 6 | Application service interface | 应用服务接口 | 活动 |
| ISO/TC 184/SC 5/WG 9 | Key performance indicators for manufacturing operations management | 制造业运营管理的关键绩效指标 | 活动 |
| ISO/TC 184/SC 5/WG 10 | Evaluation of energy efficiency and other relevant factors of a manufacturing system with respect to its environmental influence | 评价一个制造系统的能源效率和其他相关因素对环境的影响 | 活动 |
| ISO/TC 184/SC 5/WG 12 | Convergence of informatization and industrialization | 信息化和工业化的融合 | 活动 |
| ISO/TC 184/SC 5/WG 13 | Equipment behaviour catalogue | 设备行为目录 | 活动 |
| ISO/TC 184/SC 5/WG 14 | Mass customization | 大规模定制 | 活动 |
| ISO/TC 184/SC 5/WG 15 | Model-based standards authoring | 基于模型的标准编写 | 活动 |
| ISO/TC 184/SC 5/WG 16 | Supply chain interoperability and integration (SCII) | 供应链互操作性和整合(SCII) | 活动 |
| ISO/TC 184/SC 5/WG 17 | Interoperability of simulation models on different manufacturing platforms | 不同制造平台上仿真模型的互操作性 | 活动 |
| ISO/TC 185/WG 1 | Two-phase flow | 两相流 | 活动 |
| ISO/TC 185/WG 17 | Application and installation of safety devices excluding stand alone bursting disc safety devices | 安全装置的应用和安装，不包括独立的爆裂盘安全装置 | 活动 |
| ISO/TC 185/WG 18 | Performance testing | 性能测试 | 活动 |
| ISO/TC 185/WG 19 | Safety devices for protection against excessive pressure -- Application, selection and installation of bursting disc safety devices | 防止压力过大的安全装置 -- 爆破盘安全装置的应用、选择和安装 | 活动 |
| ISO/TC 186/WG 2 | Cutlery - Requirements and Specification | 餐具 - 要求和规格 | 活动 |
| ISO/TC 188/JWG 1 | Joint ISO/TC 188 - IEC/TC 18 WG: Electric propulsion systems | ISO/TC 188 - IEC/TC 18联合工作组：电力推进系统 | 活动 |
| ISO/TC 188/WG 2 | Inflatable and life rafts | 充气筏和救生筏 | 活动 |
| ISO/TC 188/WG 3 | Cockpits: deck fittings and rigging parts | 驾驶舱：甲板配件和索具部件 | 活动 |
| ISO/TC 188/WG 5 | Engine and propulsive systems | 发动机和推进系统 | 活动 |
| ISO/TC 188/WG 9 | Main dimensions of the craft and identification of the hull | 飞船的主要尺寸和船体的识别 | 活动 |
| ISO/TC 188/WG 20 | Windows, portlights, hatches, deadlights and doors | 窗户、舷窗、舱口、死灯和门 | 活动 |
| ISO/TC 188/WG 31 | Fire protection | 火灾保护 | 活动 |
| ISO/TC 188/WG 32 | Lithium-Ion batteries | 锂离子电池 | 活动 |
| ISO/TC 188/WG 33 | Liquefied petroleum gas systems | 液化石油气系统 | 活动 |
| ISO/TC 188/WG 34 | Field of vision (Amendment of ISO 11591:2020) | 视野（ISO 11591:2020的修正案） | 活动 |
| ISO/TC 188/WG 35 | Hull construction and scantlings | 船体建造和剪裁 | 活动 |
| ISO/TC 189/WG 1 | Test methods | 测试方法 | 活动 |
| ISO/TC 189/WG 2 | Product specifications | 产品规格 | 活动 |
| ISO/TC 189/WG 3 | Products for installation | 安装用的产品 | 活动 |
| ISO/TC 189/WG 4 | Thin Tiles | 薄型瓷砖 | 活动 |
| ISO/TC 189/WG 6 | Installation methods | 安装方法 | 活动 |
| ISO/TC 189/WG 7 | Sustainability issues for ceramic tiling systems | 陶瓷瓷砖系统的可持续性问题 | 活动 |
| ISO/TC 189/WG 8 | Antimicrobial properties of ceramic tile surfaces | 瓷砖表面的抗菌性能 | 活动 |
| ISO/TC 189/WG 9 | Low modulus adhesives for exterior tile finishing | 用于外部瓷砖装饰的低模量粘合剂 | 活动 |
| ISO/TC 189/WG 10 | Slip Resistance Measurement for Ceramic Tile | 瓷砖的抗滑性测量 | 活动 |
| ISO/TC 189/WG 11 | Uncoupling membranes for ceramic tile installation | 用于瓷砖安装的解耦膜 | 活动 |
| ISO/TC 190/WG 1 | Soil and climate change | 土壤和气候变化 | 活动 |
| ISO/TC 190/WG 2 | Terminology and data management | 术语和数据管理 | 活动 |
| ISO/TC 190/WG 3 | Assessment of soil functions / ecosystem services | 土壤功能/生态系统服务的评估 | 活动 |
| ISO/TC 190/SC 3/WG 1 | Inorganic analysis | 无机物分析 | 活动 |
| ISO/TC 190/SC 3/WG 6 | Organic analysis | 有机分析 | 活动 |
| ISO/TC 190/SC 3/WG 10 | Screening methods | 筛选方法 | 活动 |
| ISO/TC 190/SC 3/WG 14 | Physical methods | 物理方法 | 活动 |
| ISO/TC 190/SC 4/JWG 6 | Joint ISO/TC 190/SC 4 - ISO/TC 147/SC 5 WG: Validation of biotests | ISO/TC 190/SC 4 - ISO/TC 147/SC 5联合工作组：生物测试的验证 | 活动 |
| ISO/TC 190/SC 4/WG 2 | Effects on soil fauna | 对土壤动物的影响 | 活动 |
| ISO/TC 190/SC 4/WG 3 | Effects on soil flora | 对土壤菌群的影响 | 活动 |
| ISO/TC 190/SC 4/WG 4 | Effects on soil micro-organisms | 对土壤微生物的影响 | 活动 |
| ISO/TC 190/SC 4/WG 5 | Ecotoxicological aspects | 生态毒理学方面 | 活动 |
| ISO/TC 190/SC 7/WG 4 | Human exposure | 人体接触 | 活动 |
| ISO/TC 190/SC 7/WG 6 | Transfer and mobility of components | 组件的转移和流动 | 活动 |
| ISO/TC 190/SC 7/WG 10 | Contaminated site assessment | 污染场地评估 | 活动 |
| ISO/TC 190/SC 7/WG 13 | Sampling | 抽样调查 | 活动 |
| ISO/TC 192/WG 4 | Gas turbine | 燃气轮机 | 活动 |
| ISO/TC 192/WG 10 | Gas turbine safety | 燃气轮机安全 | 活动 |
| ISO/TC 192/WG 12 | Microturbines | 微型涡轮机 | 活动 |
| ISO/TC 193/WG 2 | Quality designation | 质量指定 | 活动 |
| ISO/TC 193/WG 4 | Vocabulary | 词汇 | 活动 |
| ISO/TC 193/WG 5 | Odorization | 气味 | 活动 |
| ISO/TC 193/WG 7 | Energy determination | 能源确定 | 活动 |
| ISO/TC 193/WG 8 | Knock resistance | 抗击打能力 | 活动 |
| ISO/TC 193/WG 9 | Inferential devices | 推理装置 | 活动 |
| ISO/TC 193/SC 1/WG 13 | Thermodynamic properties | 热力学特性 | 活动 |
| ISO/TC 193/SC 1/WG 17 | Analysis with Associated Uncertainty | 具有相关不确定性的分析 | 活动 |
| ISO/TC 193/SC 1/WG 18 | Revision of ISO 6976 | 对ISO 6976的修订 | 活动 |
| ISO/TC 193/SC 1/WG 20 | Revision of ISO 10715 | 对ISO 10715的修订 | 活动 |
| ISO/TC 193/SC 1/WG 21 | Revision of ISO 10101 | 对ISO 10101的修订 | 活动 |
| ISO/TC 193/SC 1/WG 24 | Sulfur UV Fluorescence | 硫磺的紫外线荧光 | 活动 |
| ISO/TC 193/SC 1/WG 25 | Biomethane | 生物甲烷 | 活动 |
| ISO/TC 193/SC 1/WG 26 | Coalbed methane and coal based synthetic natural gas | 煤层气和煤基合成天然气 | 活动 |
| ISO/TC 193/SC 3/WG 1 | Allocation and measurement | 分配和测量 | 活动 |
| ISO/TC 193/SC 3/WG 2 | Wet Gas measurement | 湿式气体测量 | 活动 |
| ISO/TC 193/SC 3/WG 3 | Hydrate management | 水分管理 | 活动 |
| ISO/TC 193/SC 3/WG 4 | Online Gas Chromatography (OGC) applications | 在线气相色谱（OGC）的应用 | 活动 |
| ISO/TC 193/SC 3/WG 5 | Wet gas sampling | 湿式气体采样 | 活动 |
| ISO/TC 193/SC 3/WG 6 | Hydrogen sulfide | 硫化氢 | 活动 |
| ISO/TC 193/SC 3/WG 7 | Composition/Raman spectroscopy | 组成/拉曼光谱学 | 活动 |
| ISO/TC 193/SC 3/WG 8 | Slick water testing | 滑溜溜的水测试 | 活动 |
| ISO/TC 194/WG 1 | Systematic approach to biological evaluation and terminology | 生物评估和术语的系统方法 | 活动 |
| ISO/TC 194/WG 2 | Degradation aspects related to biological testing | 与生物测试有关的降解方面 | 活动 |
| ISO/TC 194/WG 3 | Animal protection aspects | 动物保护方面 | 活动 |
| ISO/TC 194/WG 4 | Clinical investigations of medical devices in humans | 医疗器械在人体中的临床调查 | 活动 |
| ISO/TC 194/WG 5 | Cytotoxicity | 细胞毒性 | 活动 |
| ISO/TC 194/WG 6 | Mutagenicity, carcinogenicity and reproductive toxicity | 诱发性、致癌性和生殖毒性 | 活动 |
| ISO/TC 194/WG 7 | Systemic toxicity | 系统性毒性 | 活动 |
| ISO/TC 194/WG 8 | Irritation, sensitization | 刺激性、致敏性 | 活动 |
| ISO/TC 194/WG 9 | Effects on blood | 对血液的影响 | 活动 |
| ISO/TC 194/WG 10 | Implantation | 植入 | 活动 |
| ISO/TC 194/WG 11 | Allowable limits for leachable substances | 可浸出物质的允许限度 | 活动 |
| ISO/TC 194/WG 12 | Sample preparation and reference materials | 样品制备和参考材料 | 活动 |
| ISO/TC 194/WG 13 | Toxicokinetics | 毒物代谢动力学 | 活动 |
| ISO/TC 194/WG 14 | Material characterization | 材料表征 | 活动 |
| ISO/TC 194/WG 15 | Strategic approach to biological assessment | 生物评估的战略方法 | 活动 |
| ISO/TC 194/WG 16 | Pyrogenicity | 热原性 | 活动 |
| ISO/TC 194/WG 17 | Nanomaterials | 纳米材料 | 活动 |
| ISO/TC 194/WG 18 | Attributes of medical devices relevant to biological risk assessment | 与生物风险评估有关的医疗器械的属性 | 活动 |
| ISO/TC 195/WG 2 | Terminology | 术语 | 活动 |
| ISO/TC 195/WG 5 | Road construction and maintenance equipment - Terminology and commercial specifications | 道路建设和维护设备 - 术语和商业规格 | 活动 |
| ISO/TC 195/WG 6 | Hand-held machinery and equipment | 手持式机器和设备 | 活动 |
| ISO/TC 195/WG 9 | Safety of mobile road construction machinery | 移动式道路施工机械的安全 | 活动 |
| ISO/TC 195/SC 1/WG 2 | Concrete floating machines | 混凝土漂浮机 | 活动 |
| ISO/TC 195/SC 1/WG 4 | Truck mixers | 搅拌车 | 活动 |
| ISO/TC 195/SC 1/WG 5 | Machinery and Plants for the preparation of concrete and mortar | 制备混凝土和砂浆的机器和设备 | 活动 |
| ISO/TC 195/SC 1/WG 6 | Concrete pumps | 混凝土泵 | 活动 |
| ISO/TC 195/SC 1/WG 7 | Concrete mixers | 混凝土搅拌器 | 活动 |
| ISO/TC 195/SC 1/WG 8 | Concrete machinery - Worksite data exchange | 混凝土机械 - 施工现场数据交换 | 活动 |
| ISO/TC 195/SC 1/WG 9 | Self-loading mobile concrete mixers‖ | 自装式移动混凝土搅拌机" | 活动 |
| ISO/TC 195/SC 1/WG 10 | Internal vibrators for concrete | 混凝土的内部振动器 | 活动 |
| ISO/TC 195/SC 2/WG 1 | Winter maintenance equipment | 冬季维护设备 | 活动 |
| ISO/TC 195/SC 2/WG 2 | Sweeper | 扫地机 | 活动 |
| ISO/TC 195/SC 3/WG 1 | Terminology and definitions | 术语和定义 | 活动 |
| ISO/TC 197/JWG 30 | Joint ISO/TC 197 - ISO/TC 22/SC 41 WG: Gaseous hydrogen land vehicle fuel system components | ISO/TC 197 - ISO/TC 22/SC 41联合工作组：气态氢陆路车辆燃料系统部件 | 活动 |
| ISO/TC 197/WG 1 | Liquid hydrogen - Land vehicles fuel tanks | 液态氢 - 陆地车辆燃料箱 | 活动 |
| ISO/TC 197/WG 5 | Gaseous hydrogen land vehicle refuelling connection devices | 气态氢气陆地车辆加注连接装置 | 活动 |
| ISO/TC 197/WG 15 | Cylinders and tubes for stationary storage | 用于固定存储的气缸和管子 | 活动 |
| ISO/TC 197/WG 18 | Gaseous hydrogen land vehicle fuel tanks and TPRDs | 气态氢陆地车辆燃料箱和TPRD | 活动 |
| ISO/TC 197/WG 19 | Gaseous hydrogen fueling station dispensers | 气态氢气加注站加油机 | 活动 |
| ISO/TC 197/WG 21 | Gaseous hydrogen fueling station compressors | 气态氢气加注站压缩机 | 活动 |
| ISO/TC 197/WG 22 | Gaseous hydrogen fueling station hoses | 气态氢气加注站软管 | 活动 |
| ISO/TC 197/WG 23 | Gaseous hydrogen fueling station fittings | 气态氢气加注站配件 | 活动 |
| ISO/TC 197/WG 24 | Gaseous hydrogen – Fuelling protocols for hydrogen-fuelled vehicles | 气态氢 - 以氢为燃料的车辆的燃料协议 | 活动 |
| ISO/TC 197/WG 27 | Hydrogen fuel quality | 氢气燃料的质量 | 活动 |
| ISO/TC 197/WG 28 | Hydrogen quality control | 氢气质量控制 | 活动 |
| ISO/TC 197/WG 29 | Basic considerations for the safety of hydrogen systems | 氢气系统安全的基本考虑 | 活动 |
| ISO/TC 197/WG 31 | O-rings | O型环 | 活动 |
| ISO/TC 197/WG 32 | Hydrogen generators using water electrolysis | 使用水电解的氢气发生器 | 活动 |
| ISO/TC 197/WG 33 | Sampling for fuel quality analysis | 用于燃料质量分析的取样 | 活动 |
| ISO/TC 197/WG 34 | Hydrogen generators using water electrolysis test protocols and safety requirements | 使用水电解的制氢机测试协议和安全要求 | 活动 |
| ISO/TC 197/WG 35 | Liquid Hydrogen Land Vehicle Fueling Protocol | 液态氢陆地车辆燃料协议 | 活动 |
| ISO/TC 197/SC 1/WG 1 | Methodology for Determining the Greenhouse Gas Emissions Associated with the Production, Conditioning and Transport of Hydrogen to Consumption Gate | 确定与氢气生产、调节和运输到消费门相关的温室气体排放的方法学 | 活动 |
| ISO/TC 198/WG 1 | Industrial ethylene oxide sterilization | 工业环氧乙烷灭菌法 | 活动 |
| ISO/TC 198/WG 2 | Radiation sterilization | 辐射消毒 | 活动 |
| ISO/TC 198/WG 3 | Moist heat sterilization | 湿热灭菌 | 活动 |
| ISO/TC 198/WG 4 | Biological indicators | 生物学指标 | 活动 |
| ISO/TC 198/WG 5 | Terminology | 术语 | 活动 |
| ISO/TC 198/WG 6 | Chemical indicators | 化学指标 | 活动 |
| ISO/TC 198/WG 7 | Packaging | 包装 | 活动 |
| ISO/TC 198/WG 8 | Microbiological methods | 微生物方法 | 活动 |
| ISO/TC 198/WG 9 | Aseptic processing | 无菌处理 | 活动 |
| ISO/TC 198/WG 12 | Information for reprocessing of resterilizable devices | 可再消毒器械的再处理信息 | 活动 |
| ISO/TC 198/WG 13 | Washer-disinfectors | 洗衣机-消毒器 | 活动 |
| ISO/TC 199/WG 3 | Safety of integrated manufacturing systems | 集成制造系统的安全 | 活动 |
| ISO/TC 199/WG 5 | General principles for the design of machinery and risk assessment | 机械设计和风险评估的一般原则 | 活动 |
| ISO/TC 199/WG 6 | Safety distances and ergonomic aspects | 安全距离和人体工程学方面 | 活动 |
| ISO/TC 199/WG 7 | Interlocking devices | 联锁装置 | 活动 |
| ISO/TC 199/WG 8 | Safe Control Systems | 安全控制系统 | 活动 |
| ISO/TC 199/WG 10 | Fire prevention and protection | 火灾预防和保护 | 活动 |
| ISO/TC 199/WG 11 | Permanent means of access to machinery | 进入机器的永久性手段 | 活动 |
| ISO/TC 199/WG 12 | Human-machine-interactions | 人-机-互动 | 活动 |
| ISO/TC 201/WG 4 | Surface characterization of biological materials | 生物材料的表面表征 | 活动 |
| ISO/TC 201/WG 5 | Optical interface analysis | 光学界面分析 | 活动 |
| ISO/TC 201/SC 1/WG 2 | Definitions of terms | 术语的定义 | 活动 |
| ISO/TC 201/SC 2/WG 4 | Sample handling | 样品处理 | 活动 |
| ISO/TC 201/SC 6/WG 4 | Organic and Nano SIMS | 有机和纳米SIMS | 活动 |
| ISO/TC 201/SC 7/WG 2 | Quantification and interpretation of data in electron spectroscopy | 电子光谱学中数据的量化和解释 | 活动 |
| ISO/TC 201/SC 9/WG 4 | Application-oriented dimensional SPM calibrations | 面向应用的尺寸SPM校准 | 活动 |
| ISO/TC 201/SC 9/WG 5 | Calibration of probes | 探头的校准 | 活动 |
| ISO/TC 201/SC 9/WG 6 | Use of ESPM | 使用ESPM | 活动 |
| ISO/TC 201/SC 9/WG 7 | Mechanical Properties of Materials | 材料的机械性能 | 活动 |
| ISO/TC 201/SC 10/WG 1 | XRF technique | XRF技术 | 活动 |
| ISO/TC 202/WG 1 | General procedures and data management | 一般程序和数据管理 | 活动 |
| ISO/TC 202/WG 6 | Microbeam analysis - Guideline for electron backscatter diffraction analysis | 微束分析--电子背向散射衍射分析的指导原则 | 活动 |
| ISO/TC 202/SC 2/WG 10 | Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy | 确定波长色散光谱法的实验参数的准则 | 活动 |
| ISO/TC 202/SC 2/WG 11 | Guidelines for the specification of certified reference materials (CRMs) | 经认证的参考物质（CRM）的规格指南 | 活动 |
| ISO/TC 204/JWG 1 | Joint ISO/TC 204 - ISO/IEC JTC1 WG: City data model transportation planning | 联合ISO/TC 204 - ISO/IEC JTC1工作组：城市数据模型交通规划 | 活动 |
| ISO/TC 204/WG 1 | Architecture | 建筑学 | 活动 |
| ISO/TC 204/WG 3 | ITS geographic data | ITS的地理数据 | 活动 |
| ISO/TC 204/WG 5 | Fee and toll collection | 收费和收费 | 活动 |
| ISO/TC 204/WG 7 | General fleet management and commercial/freight | 一般车队管理和商业/货运 | 活动 |
| ISO/TC 204/WG 8 | Public transport/emergency | 公共交通/紧急情况 | 活动 |
| ISO/TC 204/WG 9 | Integrated transport information, management and control | 综合运输信息、管理和控制 | 活动 |
| ISO/TC 204/WG 10 | Traveller information systems | 旅行者信息系统 | 活动 |
| ISO/TC 204/WG 14 | Vehicle/roadway warning and control systems | 车辆/道路警告和控制系统 | 活动 |
| ISO/TC 204/WG 16 | Communications | 通讯 | 活动 |
| ISO/TC 204/WG 17 | Nomadic Devices in ITS Systems | ITS系统中的游牧设备 | 活动 |
| ISO/TC 204/WG 18 | Cooperative systems | 合作系统 | 活动 |
| ISO/TC 204/WG 19 | Mobility integration | 移动性整合 | 活动 |
| ISO/TC 204/WG 20 | Big Data and Artificial Intelligence supporting ITS | 支持ITS的大数据和人工智能 | 活动 |
| ISO/TC 205/JWG 11 | Joint ISO/TC 205 - ISO/TC 163 WG: Moisture damage | ISO/TC 205 - ISO/TC 163联合工作组：湿气损害 | 活动 |
| ISO/TC 205/JWG 12 | Joint ISO/TC 205 - ISO/TC 274 WG: Visual indoor environment | ISO/TC 205 - ISO/TC 274联合工作组：室内视觉环境 | 活动 |
| ISO/TC 205/WG 1 | General principles | 一般原则 | 活动 |
| ISO/TC 205/WG 2 | Design of energy-efficient buildings | 高能效建筑的设计 | 活动 |
| ISO/TC 205/WG 3 | Building Automation and Control System (BACS) Design | 建筑自动化和控制系统（BACS）设计 | 活动 |
| ISO/TC 205/WG 7 | Indoor visual environment | 室内视觉环境 | 活动 |
| ISO/TC 205/WG 8 | Radiant heating and cooling systems | 辐射加热和冷却系统 | 活动 |
| ISO/TC 205/WG 9 | Heating and cooling systems | 加热和冷却系统 | 活动 |
| ISO/TC 205/WG 10 | Commissioning | 调试 | 活动 |
| ISO/TC 206/WG 1 | Terminology/Classification | 术语/分类 | 活动 |
| ISO/TC 206/WG 2 | Powders | 粉末 | 活动 |
| ISO/TC 206/WG 3 | Chemical analysis | 化学分析 | 活动 |
| ISO/TC 206/WG 4 | Composites | 复合材料 | 活动 |
| ISO/TC 206/WG 7 | Monolithic ceramics/ Physical, mechanical and thermal properties | 单片陶瓷/物理、机械和热性能 | 活动 |
| ISO/TC 206/WG 8 | Joining | 加入 | 活动 |
| ISO/TC 206/WG 9 | Photocatalysis | 光催化 | 活动 |
| ISO/TC 206/WG 10 | Coatings | 涂料 | 活动 |
| ISO/TC 206/WG 11 | Electrical and optical applications | 电气和光学应用 | 活动 |
| ISO/TC 206/WG 12 | Engineering applications and porous ceramics | 工程应用和多孔陶瓷 | 活动 |
| ISO/TC 207/SC 1/WG 11 | Applying ISO 14001 framework to environmental aspects by topic areas | 按主题领域将ISO 14001框架应用于环境方面 | 活动 |
| ISO/TC 207/SC 4/WG 5 | Environmental Technology Verification | 环境技术验证 | 活动 |
| ISO/TC 207/SC 5/JWG 14 | Joint ISO/TC 207/SC 5 - ISO/TC 323 WG: Secondary materials | ISO/TC 207/SC 5 - ISO/TC 323联合工作组：二级材料 | 活动 |
| ISO/TC 207/SC 5/WG 12 | Life cycle assessment -- Requirements and guidelines | 生命周期评估-要求和准则 | 活动 |
| ISO/TC 207/SC 5/WG 13 | Land degradation and desertification | 土地退化和沙漠化 | 活动 |
| ISO/TC 207/SC 5/WG 15 | Social life cycle assessments | 社会生命周期评估 | 活动 |
| ISO/TC 207/SC 5/WG 16 | Eco-Technoeconomic Analyses | 生态-技术-经济分析 | 活动 |
| ISO/TC 207/SC 7/JWG 6 | Joint TC 207/SC 7 - CASCO WG: Verification and validation of environmental information | TC 207/SC 7-CASCO联合工作组：环境信息的验证和确认 | 活动 |
| ISO/TC 207/SC 7/WG 4 | Quantification and reporting of greenhouse gas emissions and removals at organizational level | 在组织层面量化和报告温室气体的排放和清除量 | 活动 |
| ISO/TC 207/SC 7/WG 13 | Radiative forcing management | 辐射作用力管理 | 活动 |
| ISO/TC 207/SC 7/WG 14 | Quantification and reporting of greenhouse gas emissions arising from operations of transport chains | 量化和报告运输链运作产生的温室气体排放 | 活动 |
| ISO/TC 207/SC 7/WG 15 | Carbon neutrality | 碳中和 | 活动 |
| ISO/TC 209/WG 2 | Biocontamination control | 生物污染控制 | 活动 |
| ISO/TC 209/WG 4 | Design and construction | 设计和施工 | 活动 |
| ISO/TC 209/WG 5 | Operations | 业务 | 活动 |
| ISO/TC 209/WG 7 | Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) | 隔离装置（洁净空气罩、手套箱、隔离器和小型环境） | 活动 |
| ISO/TC 209/WG 11 | Assessment of suitability of equipment and materials for cleanrooms | 评估设备和材料对洁净室的适用性 | 活动 |
| ISO/TC 209/WG 15 | Airborne particle sampling techniques | 空气中的颗粒物采样技术 | 活动 |
| ISO/TC 209/WG 16 | General technical requirements of modular isolation units | 模块化隔离装置的一般技术要求 | 活动 |
| ISO/TC 210/JWG 1 | Joint ISO/TC 210-IEC/SC 62A WG : Application of risk management to medical devices | ISO/TC 210-IEC/SC 62A联合工作组：风险管理在医疗设备中的应用 | 活动 |
| ISO/TC 210/JWG 2 | Joint ISO/TC 210-IEC/SC 62A WG : Medical device software | ISO/TC 210-IEC/SC 62A联合工作组：医疗设备软件 | 活动 |
| ISO/TC 210/JWG 3 | Joint ISO/TC 210-IEC/SC 62A WG : Medical device usability | ISO/TC 210-IEC/SC 62A联合工作组：医疗设备的可用性 | 活动 |
| ISO/TC 210/JWG 4 | Joint ISO/TC 210 - IEC/SC 62D WG: Small bore connectors | ISO/TC 210 - IEC/SC 62D联合工作组：小口径连接器 | 活动 |
| ISO/TC 210/WG 1 | Application of quality systems to medical devices | 质量体系在医疗设备中的应用 | 活动 |
| ISO/TC 210/WG 2 | General aspects stemming from the application of quality principles to medical devices | 将质量原则应用于医疗设备所产生的一般问题 | 活动 |
| ISO/TC 210/WG 3 | Symbols and nomenclature for medical devices | 医疗器械的符号和命名法 | 活动 |
| ISO/TC 210/WG 5 | Connectors for reservoir delivery systems | 储层输送系统的连接器 | 活动 |
| ISO/TC 210/WG 7 | Good engineering maintenance management | 良好的工程维护管理 | 活动 |
| ISO/TC 211/JWG 11 | Joint ISO/TC 211 - ISO/TC 204 WG: GIS-ITS | ISO/TC 211 - ISO/TC 204联合工作组：GIS-ITS | 活动 |
| ISO/TC 211/WG 1 | Framework and reference model | 框架和参考模型 | 活动 |
| ISO/TC 211/WG 4 | Geospatial services | 地理空间服务 | 活动 |
| ISO/TC 211/WG 6 | Imagery | 画面 | 活动 |
| ISO/TC 211/WG 7 | Information communities | 信息社区 | 活动 |
| ISO/TC 211/WG 9 | Information management | 信息管理 | 活动 |
| ISO/TC 211/WG 10 | Ubiquitous public access | 无处不在的公众访问 | 活动 |
| ISO/TC 212/JWG 6 | Joint ISO/TC 212 - ISO/TC 276 WG: Quality practice for detection of SARS-CoV-2 | ISO/TC 212 - ISO/TC 276联合工作组：检测SARS-CoV-2的质量规范 | 活动 |
| ISO/TC 212/WG 1 | Quality and competence in the medical laboratory | 医学实验室的质量和能力 | 活动 |
| ISO/TC 212/WG 2 | Reference systems | 参考系统 | 活动 |
| ISO/TC 212/WG 3 | In vitro diagnostic products | 体外诊断产品 | 活动 |
| ISO/TC 212/WG 4 | Microbiology and molecular diagnostics | 微生物学和分子诊断学 | 活动 |
| ISO/TC 212/WG 5 | Laboratory biorisk management | 实验室生物风险管理 | 活动 |
| ISO/TC 213/WG 2 | Datums and datum systems | 数据点和数据系统 | 活动 |
| ISO/TC 213/WG 4 | Uncertainty of measurement and decision rules | 测量和决策规则的不确定性 | 活动 |
| ISO/TC 213/WG 6 | General requirements for geometrical product specification (GPS) measuring equipment | 对产品几何规格（GPS）测量设备的一般要求 | 活动 |
| ISO/TC 213/WG 9 | Dimensional and geometrical tolerancing for castings | 铸件的尺寸和几何公差 | 活动 |
| ISO/TC 213/WG 10 | Coordinate measuring machines | 三坐标测量机 | 活动 |
| ISO/TC 213/WG 12 | Size | 尺寸 | 活动 |
| ISO/TC 213/WG 14 | Vertical GPS principles | 垂直GPS原理 | 活动 |
| ISO/TC 213/WG 15 | GPS extraction and filtration techniques | GPS提取和过滤技术 | 活动 |
| ISO/TC 213/WG 16 | Areal and profile surface texture | 面积和轮廓的表面纹理 | 活动 |
| ISO/TC 213/WG 17 | Facilitation of GPS implementation | 促进GPS的实施 | 活动 |
| ISO/TC 213/WG 18 | Geometrical tolerancing | 几何公差 | 活动 |
| ISO/TC 214/WG 1 | Mobile elevating work platforms | 移动式升降工作平台 | 活动 |
| ISO/TC 215/JWG 1 | Joint ISO/TC 215 - ISO/TC 249 WG: Traditional Chinese Medicine (Informatics) | ISO/TC 215 - ISO/TC 249联合工作组：传统中医药（信息学） | 活动 |
| ISO/TC 215/JWG 7 | Joint ISO/TC 215 - IEC/SC 62A WG: Safe, effective and secure health software and health IT systems, including those incorporating medical devices | ISO/TC 215 - IEC/SC 62A联合工作组：安全、有效和可靠的卫生软件和卫生IT系统，包括那些包含医疗设备的系统 | 活动 |
| ISO/TC 215/WG 1 | Architecture, Frameworks and Models | 架构、框架和模型 | 活动 |
| ISO/TC 215/WG 2 | Systems and Device Interoperability | 系统和设备的互操作性 | 活动 |
| ISO/TC 215/WG 3 | Semantic content | 语义学内容 | 活动 |
| ISO/TC 215/WG 4 | Security, Safety and Privacy | 保安、安全和隐私 | 活动 |
| ISO/TC 215/WG 6 | Pharmacy and medicines business | 药房和药品业务 | 活动 |
| ISO/TC 215/WG 10 | Traditional Medicine | 传统医学 | 活动 |
| ISO/TC 215/WG 11 | Personalized digital health | 个性化的数字健康 | 活动 |
| ISO/TC 215/SC 1/WG 1 | Genomics data sharing | 基因组学数据共享 | 活动 |
| ISO/TC 216/WG 1 | Minimum performance requirements and test methods for components for footwear | 鞋类部件的最低性能要求和测试方法 | 活动 |
| ISO/TC 216/WG 2 | Footwear and environmental aspects | 鞋类和环境方面 | 活动 |
| ISO/TC 216/WG 3 | Terminology | 术语 | 活动 |
| ISO/TC 216/WG 5 | Footwear and microbiological aspects | 鞋类和微生物学方面 | 活动 |
| ISO/TC 217/WG 1 | Microbiological standards and limits | 微生物标准和限制 | 活动 |
| ISO/TC 217/WG 3 | Analytical methods | 分析方法 | 活动 |
| ISO/TC 217/WG 4 | Terminology | 术语 | 活动 |
| ISO/TC 217/WG 7 | Sun protection test methods | 防晒测试方法 | 活动 |
| ISO/TC 218/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 218/WG 2 | Round timber | 圆形木材 | 活动 |
| ISO/TC 218/WG 3 | Sawn and processed timber | 锯木和加工木材 | 活动 |
| ISO/TC 218/WG 4 | Test methods | 测试方法 | 活动 |
| ISO/TC 218/WG 5 | Parquet and wood flooring | 镶木地板和木质地板 | 活动 |
| ISO/TC 218/WG 6 | Wooden products | 木制产品 | 活动 |
| ISO/TC 218/WG 7 | Wood residue and post consumer wood | 木材残留物和消费后的木材 | 活动 |
| ISO/TC 219/WG 1 | Textile floor coverings | 纺织品地板覆盖物 | 活动 |
| ISO/TC 219/WG 2 | Resilient floor coverings | 弹性地板覆盖物 | 活动 |
| ISO/TC 219/WG 3 | Laminate floor coverings | 复合地板覆盖物 | 活动 |
| ISO/TC 219/WG 4 | Horizontal topics | 横向课题 | 活动 |
| ISO/TC 220/WG 1 | Design and construction | 设计和施工 | 活动 |
| ISO/TC 220/WG 2 | Operational requirements | 业务需求 | 活动 |
| ISO/TC 220/WG 3 | Supporting standards | 支持标准 | 活动 |
| ISO/TC 221/WG 2 | Terminology, identification and sampling | 术语、识别和取样 | 活动 |
| ISO/TC 221/WG 3 | Mechanical properties | 机械性能 | 活动 |
| ISO/TC 221/WG 4 | Hydraulic properties | 水力特性 | 活动 |
| ISO/TC 221/WG 5 | Durability | 耐用性 | 活动 |
| ISO/TC 221/WG 6 | Design using geosynthetics | 使用土工合成材料的设计 | 活动 |
| ISO/TC 224/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 224/WG 6 | Asset management | 资产管理 | 活动 |
| ISO/TC 224/WG 7 | Crisis management of water utilities | 水务设施的危机管理 | 活动 |
| ISO/TC 224/WG 8 | Onsite domestic wastewater management | 现场生活废水管理 | 活动 |
| ISO/TC 224/WG 10 | Flushable products | 可冲水产品 | 活动 |
| ISO/TC 224/WG 14 | Effective corporate governance and service to users | 有效的公司治理和对用户的服务 | 活动 |
| ISO/TC 224/WG 15 | Smart water management | 智能水管理 | 活动 |
| ISO/TC 224/WG 16 | Climate change adaptation | 适应气候变化 | 活动 |
| ISO/TC 224/WG 17 | ISO 24511 andISO 24512 revisions - Management and assessment of water services | ISO 24511和ISO 24512的修订--供水服务的管理和评估 | 活动 |
| ISO/TC 226/WG 1 | Carbonaceous binders, including pitch | 碳质粘合剂，包括沥青 | 活动 |
| ISO/TC 226/WG 2 | Cathodes and ramming paste | 阴极和夯实膏 | 活动 |
| ISO/TC 226/WG 3 | Smelter grade alumina | 冶炼厂级氧化铝 | 活动 |
| ISO/TC 226/WG 4 | Smelter grade fluorides | 冶炼厂级别的氟化物 | 活动 |
| ISO/TC 226/WG 6 | Anodes and coke | 阳极和焦炭 | 活动 |
| ISO/TC 227/WG 3 | Measurement and test parameters for extension spring | 拉伸弹簧的测量和测试参数 | 活动 |
| ISO/TC 227/WG 4 | Measurement and test parameters for torsion spring | 扭转弹簧的测量和测试参数 | 活动 |
| ISO/TC 228/WG 1 | Diving services | 潜水服务 | 活动 |
| ISO/TC 228/WG 3 | Tourist information and reception services | 旅游信息和接待服务 | 活动 |
| ISO/TC 228/WG 7 | Adventure tourism | 冒险旅游 | 活动 |
| ISO/TC 228/WG 8 | Yacht harbors | 游艇港湾 | 活动 |
| ISO/TC 228/WG 11 | Bare boat charter services | 裸船租赁服务 | 活动 |
| ISO/TC 228/WG 13 | Sustainable tourism | 可持续旅游 | 活动 |
| ISO/TC 228/WG 15 | Accommodation | 住宿 | 活动 |
| ISO/TC 228/WG 16 | Restaurants | 餐馆 | 活动 |
| ISO/TC 228/WG 17 | Tourist visits | 游客访问 | 活动 |
| ISO/TC 228/WG 19 | Online travel agencies (OTA) | 在线旅游机构(OTA) | 活动 |
| ISO/TC 228/WG 20 | Exhibition and Convention | 展览和会议 | 活动 |
| ISO/TC 229/JWG 1 | Terminology and nomenclature | 术语和命名法 | 活动 |
| ISO/TC 229/JWG 2 | Measurement and characterization | 测量和表征 | 活动 |
| ISO/TC 229/WG 3 | Health, Safety and Environmental Aspects of Nanotechnologies | 纳米技术的健康、安全和环境问题 | 活动 |
| ISO/TC 229/WG 4 | Material specifications | 材料规格 | 活动 |
| ISO/TC 229/WG 5 | Products and Applications | 产品和应用 | 活动 |
| ISO/TC 232/JWG 9 | Joint ISO/TC 232 - ISO/TC 260 WG: Internship | ISO/TC 232 - ISO/TC 260联合工作组：实习期 | 活动 |
| ISO/TC 232/WG 5 | Terminology | 术语 | 休眠 |
| ISO/TC 232/WG 6 | Distance and digital learning services | 远程和数字学习服务 | 活动 |
| ISO/TC 232/WG 7 | Educational organizations – Management systems, to revise ISO 21001:2018 | 教育组织 - 管理体系，修订ISO 21001:2018 | 活动 |
| ISO/TC 232/WG 8 | Auditing practice group | 审计实践小组 | 活动 |
| ISO/TC 234/WG 11 | Waste reduction and treatment in aquaculture | 水产养殖中的废物减少和处理 | 活动 |
| ISO/TC 238/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 238/WG 2 | Fuel specifications and classes | 燃料规格和等级 | 活动 |
| ISO/TC 238/WG 4 | Physical and mechanical test methods | 物理和机械测试方法 | 活动 |
| ISO/TC 238/WG 5 | Chemical test methods | 化学测试方法 | 活动 |
| ISO/TC 238/WG 6 | Sampling and sample preparation | 采样和样品制备 | 活动 |
| ISO/TC 238/WG 7 | Safety of solid biofuels | 固体生物燃料的安全性 | 活动 |
| ISO/TC 241/WG 4 | Marketing | 市场营销 | 活动 |
| ISO/TC 241/WG 6 | Guidance on ethical considerations relating to autonomous vehicles | 有关自动驾驶汽车的伦理考虑的指导意见 | 活动 |
| ISO/TC 244/WG 1 | General safety requirements | 一般安全要求 | 活动 |
| ISO/TC 244/WG 2 | Safety requirements for combustion and fuel handling systems | 燃烧和燃料处理系统的安全要求 | 活动 |
| ISO/TC 244/WG 3 | Method of energy balance and efficiency | 能量平衡和效率的方法 | 活动 |
| ISO/TC 244/WG 4 | Vocabulary | 词汇 | 活动 |
| ISO/TC 244/WG 5 | Protective system | 保护性系统 | 活动 |
| ISO/TC 244/WG 6 | Safety requirements for generation and use of protective and re活动 gases | 产生和使用保护性和反应性气体的安全要求 | 活动 |
| ISO/TC 244/WG 7 | Safety Requirements for Steelmaking Equipment | 炼钢设备的安全要求 | 活动 |
| ISO/TC 244/WG 8 | Heat treatment -- Control of quality | 热处理--质量的控制 | 活动 |
| ISO/TC 249/JWG 1 | Joint ISO/TC 249 - ISO/TC 215 WG: Informatics | ISO/TC 249 - ISO/TC 215联合工作组：信息学 | 活动 |
| ISO/TC 249/WG 1 | Quality and safety of raw materials and traditional processing | 原材料和传统加工的质量和安全 | 活动 |
| ISO/TC 249/WG 2 | Quality and safety of manufactured TCM products | 中药制成品的质量和安全 | 活动 |
| ISO/TC 249/WG 3 | Quality of acupuncture needles and safe use of acupuncture | 针灸针的质量和针灸的安全使用 | 活动 |
| ISO/TC 249/WG 4 | Quality and safety of medical devices other than acupuncture needles | 针灸针以外的医疗器械的质量和安全问题 | 活动 |
| ISO/TC 249/WG 5 | Terminology and informatics | 术语和信息学 | 活动 |
| ISO/TC 251/WG 3 | Communications | 通讯 | 活动 |
| ISO/TC 251/WG 4 | Product improvement and revision of ISO 55000 | 产品改进和ISO55000的修订 | 活动 |
| ISO/TC 251/WG 5 | Finance | 金融 | 活动 |
| ISO/TC 251/WG 6 | Revision of ISO 55001 | 对ISO 55001的修订 | 活动 |
| ISO/TC 251/WG 7 | Development of ISO 55011 | ISO 55011的发展 | 活动 |
| ISO/TC 251/WG 8 | People involvement and competence | 人们的参与和能力 | 活动 |
| ISO/TC 251/WG 9 | Development of ISO 55013 | ISO 55013的发展 | 活动 |
| ISO/TC 254/WG 1 | Biomechanical effects | 生物力学效应 | 活动 |
| ISO/TC 254/WG 2 | Design, manufacture and construction | 设计、制造和施工 | 活动 |
| ISO/TC 254/WG 3 | Operation and use | 操作和使用 | 活动 |
| ISO/TC 255/WG 1 | Terms, definitions and classification scheme for the production, conditioning and utilization of biogas | 沼气生产、调节和利用的术语、定义和分类方案 | 活动 |
| ISO/TC 255/WG 2 | Flares for biogas plants | 沼气厂的燃烧器 | 活动 |
| ISO/TC 255/WG 3 | Domestic biogas installations (household and small farm scale) | 家用沼气装置（家庭和小型农场规模） | 活动 |
| ISO/TC 255/WG 4 | Safety and environmental aspects | 安全和环境方面 | 活动 |
| ISO/TC 255/WG 5 | Biogas systems – Non-household | 沼气系统 - 非家用 | 活动 |
| ISO/TC 255/WG 6 | Biomass gasification | 生物质气化 | 活动 |
| ISO/TC 256/WG 2 | Nanotechnological properties of pigments and extenders | 颜料和扩展剂的纳米技术特性 | 活动 |
| ISO/TC 256/WG 3 | General test methods for colorants and extenders | 着色剂和扩展剂的一般测试方法 | 活动 |
| ISO/TC 256/WG 7 | Functional pigments and extenders | 功能性颜料和扩展剂 | 活动 |
| ISO/TC 256/WG 8 | Colorants and extenders for coating materials, plastics, paper and printing inks | 用于涂层材料、塑料、纸张和印刷油墨的着色剂和扩展剂 | 活动 |
| ISO/TC 258/WG 12 | EVM implementation guide | EVM实施指南 | 活动 |
| ISO/TC 260/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 260/WG 2 | Metrics | 度量衡 | 活动 |
| ISO/TC 260/WG 4 | Allocation and timekeeping | 分配和记时 | 活动 |
| ISO/TC 260/WG 5 | Recruitment | 招聘信息 | 活动 |
| ISO/TC 260/WG 6 | Knowledge Management | 知识管理 | 活动 |
| ISO/TC 260/WG 7 | Human Capital Reporting | 人力资本报告 | 活动 |
| ISO/TC 260/WG 13 | HRMS Requirements | 人力资源管理系统要求 | 活动 |
| ISO/TC 260/WG 14 | Data privacy | 数据隐私 | 活动 |
| ISO/TC 261/JWG 10 | Joint ISO/TC 261 - ISO/TC 44/SC 14 WG: Additive manufacturing in aerospace applications | ISO/TC 261 - ISO/TC 44/SC 14联合工作组：航空航天应用中的增材制造 | 活动 |
| ISO/TC 261/JWG 11 | Joint ISO/TC 261 - ISO/TC 61/SC 9 WG: Additive manufacturing for plastics | ISO/TC 261 - ISO/TC 61/SC 9联合工作组：塑料的快速成型制造 | 活动 |
| ISO/TC 261/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 261/WG 2 | Processes, systems and materials | 过程、系统和材料 | 活动 |
| ISO/TC 261/WG 3 | Test methods and quality specifications | 测试方法和质量规格 | 活动 |
| ISO/TC 261/WG 4 | Data and Design | 数据和设计 | 活动 |
| ISO/TC 261/WG 6 | Environment, health and safety | 环境、健康和安全 | 活动 |
| ISO/TC 262/JWG 1 | Joint ISO/TC 262 - ISO/TC 292 WG: Managing emerging risk | ISO/TC 262 - ISO/TC 292联合工作组：管理新出现的风险 | 活动 |
| ISO/TC 262/WG 6 | Guidance Handbook | 指导手册 | 活动 |
| ISO/TC 262/WG 8 | Vocabulary | 词汇 | 活动 |
| ISO/TC 262/WG 9 | Managing risk for youth and school trips | 管理青少年和学校旅行的风险 | 活动 |
| ISO/TC 263/WG 1 | Fundamentals of CBM exploration | 煤层气勘探的基本原理 | 活动 |
| ISO/TC 263/WG 2 | Underground CBM | 地下煤层气 | 活动 |
| ISO/TC 264/WG 4 | Test methods | 测试方法 | 活动 |
| ISO/TC 264/WG 5 | Fireworks display | 烟花表演 | 活动 |
| ISO/TC 265/WG 1 | Capture | 捕获 | 活动 |
| ISO/TC 265/WG 2 | Transportation | 交通运输 | 活动 |
| ISO/TC 265/WG 3 | Storage | 储存 | 活动 |
| ISO/TC 265/WG 5 | Cross Cutting Issues | 跨领域问题 | 活动 |
| ISO/TC 265/WG 6 | EOR Issues | EOR问题 | 活动 |
| ISO/TC 265/WG 7 | Transportation of CO2 by Ship | 用船舶运输二氧化碳 | 活动 |
| ISO/TC 266/WG 4 | Knowledge infrastructure of biomimetics | 生物仿生学的知识基础设施 | 活动 |
| ISO/TC 267/WG 1 | Concepts and context | 概念和背景 | 活动 |
| ISO/TC 267/WG 4 | Strategy and policy | 战略和政策 | 活动 |
| ISO/TC 267/WG 5 | Human experience | 人类的经验 | 活动 |
| ISO/TC 267/WG 6 | Digital, data and technology | 数字、数据和技术 | 活动 |
| ISO/TC 267/WG 7 | Emergency management | 紧急管理 | 活动 |
| ISO/TC 267/WG 8 | Performance measurement and improvement | 绩效衡量和改进 | 活动 |
| ISO/TC 268/WG 1 | Management System Standards | 管理系统标准 | 活动 |
| ISO/TC 268/WG 2 | City indicators | 城市指标 | 活动 |
| ISO/TC 268/WG 4 | Smart processes and operating models for sustainable communities | 可持续社区的智能流程和运营模式 | 活动 |
| ISO/TC 268/SC 1/WG 1 | Infrastructure metrics | 基础设施度量 | 活动 |
| ISO/TC 268/SC 1/WG 2 | Integration and interaction framework for smart community infrastructures | 智能社区基础设施的整合和互动框架 | 活动 |
| ISO/TC 268/SC 1/WG 4 | Data exchange and sharing for smart community infrastructures | 智能社区基础设施的数据交换和共享 | 活动 |
| ISO/TC 268/SC 1/WG 5 | Power plant | 电厂 | 活动 |
| ISO/TC 268/SC 1/WG 6 | Disaster risk reduction | 减少灾害风险 | 活动 |
| ISO/TC 268/SC 1/WG 7 | Utility tunnel | 公用设施隧道 | 活动 |
| ISO/TC 268/SC 2/WG 1 | Digital governance | 数字化治理 | 活动 |
| ISO/TC 268/SC 2/WG 2 | Platform and services | 平台和服务 | 活动 |
| ISO/TC 269/WG 5 | Railway quality management system | 铁路质量管理系统 | 活动 |
| ISO/TC 269/WG 6 | Fire protection | 火灾保护 | 活动 |
| ISO/TC 269/WG 8 | Platform barrier systems | 平台障碍系统 | 活动 |
| ISO/TC 269/WG 9 | Wheel-rail contact geometry | 车轮-轨道接触的几何形状 | 活动 |
| ISO/TC 269/SC 1/WG 1 | Plastic sleepers | 塑料枕木 | 活动 |
| ISO/TC 269/SC 1/WG 2 | Track quality evaluation | 追踪质量评估 | 活动 |
| ISO/TC 269/SC 1/WG 3 | Rail welding | 钢轨焊接 | 活动 |
| ISO/TC 269/SC 1/WG 4 | Rail construction, maintenance and inspection machines | 铁路建设、维护和检查机器 | 活动 |
| ISO/TC 269/SC 1/WG 5 | Monitoring and treatment of rails | 对钢轨的监测和处理 | 活动 |
| ISO/TC 269/SC 1/WG 6 | Concrete sleepers and bearers | 混凝土枕木和支座 | 活动 |
| ISO/TC 269/SC 1/WG 7 | Fastening systems | 紧固系统 | 活动 |
| ISO/TC 269/SC 1/WG 8 | Track foundation | 轨道基础 | 活动 |
| ISO/TC 269/SC 1/WG 9 | Ballastless track systems | 无砟轨道系统 | 活动 |
| ISO/TC 269/SC 2/WG 1 | Railway braking | 铁路制动 | 活动 |
| ISO/TC 269/SC 2/WG 2 | HVAC systems | 暖通空调系统 | 活动 |
| ISO/TC 269/SC 2/WG 3 | Body side glazing for railway rolling stock | 铁路机车车辆的车体侧面玻璃 | 活动 |
| ISO/TC 269/SC 2/WG 5 | Rolling stock suspension components | 机车车辆悬挂部件 | 活动 |
| ISO/TC 269/SC 2/WG 6 | Passenger seats | 乘客座椅 | 活动 |
| ISO/TC 269/SC 2/WG 7 | Derailment detection systems | 脱轨检测系统 | 活动 |
| ISO/TC 269/SC 2/WG 8 | Interior passive safety | 内部被动安全 | 活动 |
| ISO/TC 269/SC 2/WG 9 | Painting of railway vehicles | 铁路车辆的涂装 | 活动 |
| ISO/TC 269/SC 2/WG 10 | Gauges | 计量器 | 活动 |
| ISO/TC 269/SC 2/WG 11 | Structural requirements | 结构要求 | 活动 |
| ISO/TC 269/SC 2/WG 12 | Particles emission measurement method | 颗粒物排放测量方法 | 活动 |
| ISO/TC 269/SC 3/WG 1 | Planning of operational concepts for earthquakes | 针对地震的行动概念的规划 | 活动 |
| ISO/TC 269/SC 3/WG 2 | Railway driving simulator for drivers’ training | 用于驾驶员培训的铁路驾驶模拟器 | 活动 |
| ISO/TC 269/SC 3/WG 3 | Railway timetabling | 铁路时刻表 | 活动 |
| ISO/TC 269/SC 3/WG 4 | Rolling stock relevant operation and maintenance documentation | 机车车辆的相关操作和维护文件 | 活动 |
| ISO/TC 269/SC 3/WG 5 | Principles of train detection for operations and services | 运营和服务的列车检测原则 | 活动 |
| ISO/TC 270/WG 2 | Extruders | 挤压机 | 活动 |
| ISO/TC 270/WG 3 | Clamping systems for plastics and rubber machines | 用于塑料和橡胶机械的夹持系统 | 活动 |
| ISO/TC 274/JWG 1 | Energy performance of lighting in buildings (joint working group with CIE-JTC 6) | 建筑物照明的能源性能（与CIE-JTC 6的联合工作小组） | 活动 |
| ISO/TC 274/JWG 5 | Lighting for work places (joint working group with CIE-JTC 15) | 工作场所的照明（与CIE-JTC 15联合工作小组） | 活动 |
| ISO/TC 274/WG 2 | Commissioning process of lighting systems | 照明系统的调试过程 | 活动 |
| ISO/TC 275/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 275/WG 2 | Characterization methods | 表征方法 | 活动 |
| ISO/TC 275/WG 3 | Anaerobic digestion | 厌氧消化 | 活动 |
| ISO/TC 275/WG 4 | Land application | 土地应用 | 活动 |
| ISO/TC 275/WG 5 | Thermal processes | 热过程 | 活动 |
| ISO/TC 275/WG 6 | Thickening and dewatering | 浓缩和脱水 | 活动 |
| ISO/TC 275/WG 7 | Inorganics and nutrients recovery | 无机物和营养物的回收 | 活动 |
| ISO/TC 275/WG 8 | Communication and Management of Public Perception | 公众认知的沟通和管理 | 活动 |
| ISO/TC 276/WG 1 | Terminology | 术语 | 休眠 |
| ISO/TC 276/WG 2 | Biobanks and bioresources | 生物库和生物资源 | 活动 |
| ISO/TC 276/WG 3 | Analytical methods | 分析方法 | 活动 |
| ISO/TC 276/WG 4 | Bioprocessing | 生物处理 | 活动 |
| ISO/TC 276/WG 5 | Data processing and integration | 数据处理和整合 | 活动 |
| ISO/TC 279/WG 1 | Innovation management system | 创新管理制度 | 活动 |
| ISO/TC 279/WG 2 | Terminology, terms and definitions | 术语、名词和定义 | 活动 |
| ISO/TC 279/WG 3 | Tools and methods | 工具和方法 | 活动 |
| ISO/TC 281/WG 1 | General principles including terminology | 包括术语在内的一般原则 | 活动 |
| ISO/TC 281/WG 2 | Fine bubble characterization and measurement | 细小气泡的表征和测量 | 活动 |
| ISO/TC 281/WG 3 | Applications of fine bubble technology | 精细气泡技术的应用 | 活动 |
| ISO/TC 282/WG 2 | Terminology | 术语 | 活动 |
| ISO/TC 282/WG 3 | Water systems for biopharma industries | 生物制药业的水系统 | 活动 |
| ISO/TC 282/SC 1/WG 1 | Treated wastewater use for irrigation projects | 经处理的废水用于灌溉项目 | 活动 |
| ISO/TC 282/SC 2/JWG 1 | Joint ISO/TC 282/SC 2 - ISO/TC 224 WG: Cost analysis in planning of decentralized wastewater treatment for reuse in urban areas | ISO/TC 282/SC 2 - ISO/TC 224联合工作组：城市地区分散废水处理回用规划中的成本分析 | 活动 |
| ISO/TC 282/SC 2/JWG 2 | Joint ISO/TC 282/SC 2 - ISO/TC 282/SC 3 WG : Benefits evaluation of water reuse in urban areas | ISO/TC 282/SC 2 - ISO/TC 282/SC 3联合工作组：城市地区中水回用的效益评估 | 活动 |
| ISO/TC 282/SC 2/WG 1 | Centralized system design | 集中的系统设计 | 活动 |
| ISO/TC 282/SC 2/WG 3 | Reclaimed water safety evaluation | 再生水安全评估 | 活动 |
| ISO/TC 282/SC 2/WG 4 | Decentralized systems | 分散的系统 | 活动 |
| ISO/TC 282/SC 2/WG 5 | Leachate | 沥滤液 | 活动 |
| ISO/TC 282/SC 2/WG 6 | Technology for water reuse | 水的再利用技术 | 活动 |
| ISO/TC 282/SC 3/WG 2 | Performance evaluation | 业绩评估 | 活动 |
| ISO/TC 282/SC 4/WG 1 | Characterization of energy consumption for industrial wastewater treatment | 工业废水处理的能源消耗特征分析 | 活动 |
| ISO/TC 282/SC 4/WG 2 | Industrial wastewater classification and treatment/reuse technology evaluation | 工业废水分类和处理/回用技术评估 | 活动 |
| ISO/TC 282/SC 4/WG 3 | Industrial cooling water reuse | 工业冷却水回用 | 活动 |
| ISO/TC 282/SC 4/WG 4 | Pilot plan for industrial wastewater treatment facilities in the objective of reuse | 以再利用为目标的工业废水处理设施的试点计划 | 活动 |
| ISO/TC 282/SC 4/WG 6 | Wastewater treatment and reuse in thermal power plants | 热电厂的废水处理和再利用 | 活动 |
| ISO/TC 283/WG 3 | Implementation | 实施 | 活动 |
| ISO/TC 283/WG 4 | Performance evaluation | 业绩评估 | 活动 |
| ISO/TC 283/WG 5 | Infectious disease | 传染性疾病 | 活动 |
| ISO/TC 285/WG 1 | Conceptual framework | 概念性框架 | 活动 |
| ISO/TC 285/WG 2 | Laboratory testing methods | 实验室测试方法 | 活动 |
| ISO/TC 285/WG 4 | Social impacts | 社会影响 | 活动 |
| ISO/TC 286/WG 2 | Guidelines | 准则 | 休眠 |
| ISO/TC 286/WG 4 | University business collaboration | 大学商业合作 | 活动 |
| ISO/TC 287/WG 1 | Chain of Custody of wood and wood based products | 木材和木制产品的监管链 | 活动 |
| ISO/TC 287/WG 2 | Measurement methods and tracking | 测量方法和跟踪 | 活动 |
| ISO/TC 287/WG 3 | Sustainability aspects | 可持续性方面 | 活动 |
| ISO/TC 289/JWG 4 | Joint ISO/TC 289 - ISO/TC 228 WG: Brand evaluation-Tourism city | ISO/TC 289 - ISO/TC 228联合工作组：品牌评价-旅游城市 | 活动 |
| ISO/TC 289/WG 1 | Brand evaluation process | 品牌评估过程 | 活动 |
| ISO/TC 289/WG 2 | Implementation and guidelines | 实施和准则 | 活动 |
| ISO/TC 289/WG 3 | ISO 10668 Review | ISO 10668审查 | 活动 |
| ISO/TC 291/WG 1 | Safety of domestic gas cooking appliances | 家用燃气灶具的安全 | 活动 |
| ISO/TC 292/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 292/WG 2 | Continuity and organizational resilience | 连续性和组织复原力 | 活动 |
| ISO/TC 292/WG 3 | Emergency management | 紧急管理 | 活动 |
| ISO/TC 292/WG 4 | Authenticity, integrity and trust for products and documents | 产品和文件的真实性、完整性和信任度 | 活动 |
| ISO/TC 292/WG 5 | Community resilience | 社区复原力 | 活动 |
| ISO/TC 292/WG 6 | Protective security | 保护性安全 | 活动 |
| ISO/TC 292/WG 7 | Guidelines for events | 活动指南 | 活动 |
| ISO/TC 292/WG 8 | Supply chain security | 供应链安全 | 活动 |
| ISO/TC 292/WG 9 | Crisis management | 危机管理 | 活动 |
| ISO/TC 292/WG 10 | Preparedness | 准备工作 | 活动 |
| ISO/TC 293/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 293/WG 4 | Safety | 安全问题 | 活动 |
| ISO/TC 293/WG 5 | Hygiene | 卫生 | 活动 |
| ISO/TC 295/WG 1 | Audit Data Collection for Non-financial Enterprises | 非金融企业的审计数据收集 | 活动 |
| ISO/TC 296/WG 2 | Bamboo Flooring | 竹地板 | 活动 |
| ISO/TC 296/WG 3 | Bamboo Charcoal | 竹炭 | 活动 |
| ISO/TC 296/WG 4 | Rattan | 藤条 | 活动 |
| ISO/TC 296/WG 5 | Bamboo for Furniture | 家具用竹子 | 活动 |
| ISO/TC 296/WG 6 | Bamboo articles for daily use | 日常使用的竹制品 | 活动 |
| ISO/TC 297/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 297/WG 2 | Waste collection and transport vehicles | 废物收集和运输车辆 | 活动 |
| ISO/TC 298/WG 2 | Elements recycling | 元素回收 | 活动 |
| ISO/TC 298/WG 3 | Traceability, Packaging and Labelling | 可追溯性、包装和标签 | 活动 |
| ISO/TC 298/WG 4 | Testing and Analysis | 测试和分析 | 活动 |
| ISO/TC 298/WG 5 | Sustainability | 可持续发展 | 活动 |
| ISO/TC 299/JWG 5 | Joint ISO/TC 299 - IEC/SC 62A - IEC/SC 62D WG: Medical robot safety | ISO/TC 299 - IEC/SC 62A - IEC/SC 62D联合工作组：医疗机器人安全 | 活动 |
| ISO/TC 299/WG 1 | Vocabulary and characteristics | 词汇和特点 | 活动 |
| ISO/TC 299/WG 2 | Service robot safety | 服务机器人安全 | 活动 |
| ISO/TC 299/WG 3 | Industrial safety | 工业安全 | 活动 |
| ISO/TC 299/WG 4 | Service robot performance | 服务机器人的性能 | 活动 |
| ISO/TC 299/WG 6 | Modularity for service robots | 服务机器人的模块化 | 活动 |
| ISO/TC 299/WG 7 | Management system for service robots | 服务机器人的管理系统 | 活动 |
| ISO/TC 299/WG 8 | Validation methods for collaborative applications | 协作应用的验证方法 | 活动 |
| ISO/TC 299/WG 9 | Electrical interfaces for industrial robot end- effectors | 工业机器人末端效应器的电气接口 | 活动 |
| ISO/TC 300/WG 1 | Terminology and quality assurance | 术语和质量保证 | 活动 |
| ISO/TC 300/WG 2 | Specification and classes | 规格和等级 | 活动 |
| ISO/TC 300/WG 4 | Physical and mechanical tests | 物理和机械测试 | 活动 |
| ISO/TC 300/WG 5 | Chemical tests and determination of biomass content | 化学测试和生物质含量的确定 | 活动 |
| ISO/TC 300/WG 6 | Safety of solid recovered fuels | 固体回收燃料的安全性 | 活动 |
| ISO/TC 301/WG 1 | Energy management | 能源管理 | 活动 |
| ISO/TC 301/WG 2 | Metrics and measurement internal to the organization | 组织内部的指标和衡量标准 | 活动 |
| ISO/TC 301/WG 16 | Zero Net Energy | 零净能源 | 活动 |
| ISO/TC 301/WG 17 | Energy Audits | 能源审计 | 活动 |
| ISO/TC 304/WG 1 | Vocabulary | 词汇 | 活动 |
| ISO/TC 304/WG 3 | Infection prevention management | 感染预防管理 | 活动 |
| ISO/TC 304/WG 4 | Pandemic preparation and response | 大流行病的准备和应对 | 活动 |
| ISO/TC 304/WG 5 | Healthcare quality management | 医疗质量管理 | 活动 |
| ISO/TC 304/WG 6 | Telehealth Management | 远程医疗管理 | 活动 |
| ISO/TC 304/WG 7 | Immunization Management | 免疫接种管理 | 活动 |
| ISO/TC 306/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 306/WG 2 | Safety requirements for molding and core making equipment | 成型和制芯设备的安全要求 | 活动 |
| ISO/TC 306/WG 3 | Safety requirements for high pressure die casting machines | 高压压铸机的安全要求 | 活动 |
| ISO/TC 306/WG 4 | Cleaning and finishing machinery | 清洁和整理机械 | 活动 |
| ISO/TC 307/JWG 4 | Joint ISO/TC 307 - ISO/IEC JTC 1/SC 27 WG: Security, privacy and identity for Blockchain and DLT | 联合ISO/TC 307 - ISO/IEC JTC 1/SC 27工作组：区块链和DLT的安全、隐私和身份识别 | 活动 |
| ISO/TC 307/WG 1 | Foundations | 基金会 | 活动 |
| ISO/TC 307/WG 3 | Smart contracts and their applications | 智能合约及其应用 | 活动 |
| ISO/TC 307/WG 5 | Governance | 治理 | 活动 |
| ISO/TC 307/WG 6 | Use cases | 使用案例 | 活动 |
| ISO/TC 307/WG 7 | Interoperability | 互操作性 | 活动 |
| ISO/TC 308/WG 2 | Mass balance and book and claim | 质量平衡和记账与索赔 | 活动 |
| ISO/TC 309/WG 1 | Guidance for the governance of organizations | 组织治理的指导意见 | 活动 |
| ISO/TC 309/WG 2 | Anti-bribery management systems | 反贿赂管理制度 | 活动 |
| ISO/TC 309/WG 4 | Compliance management systems | 合规管理制度 | 活动 |
| ISO/TC 309/WG 5 | Guidelines for efficiency measurement | 衡量效率的准则 | 活动 |
| ISO/TC 309/WG 6 | Governance maturity model | 治理成熟度模型 | 活动 |
| ISO/TC 309/WG 7 | Internal investigations | 内部调查 | 活动 |
| ISO/TC 309/WG 8 | Fraud controls | 欺诈控制 | 活动 |
| ISO/TC 309/WG 9 | Conflict of Interest | 利益冲突 | 活动 |
| ISO/TC 310/WG 1 | General and common safety specification | 一般和常见的安全规范 | 活动 |
| ISO/TC 310/WG 2 | Feeding and mouthing | 喂食和用嘴咬 | 活动 |
| ISO/TC 310/WG 3 | Activity and protection | 活动和保护 | 活动 |
| ISO/TC 312/WG 1 | Principles, model and measurement | 原则、模型和测量 | 活动 |
| ISO/TC 312/WG 2 | Design of excellent services | 优秀服务的设计 | 活动 |
| ISO/TC 312/WG 4 | Public Services | 公共服务 | 活动 |
| ISO/TC 313/WG 1 | Safety of packaging machinery - General requirements | 包装机械的安全--一般要求 | 活动 |
| ISO/TC 314/WG 4 | Wellbeing | 幸福感 | 活动 |
| ISO/TC 314/WG 5 | Home care | 家庭护理 | 活动 |
| ISO/TC 314/WG 6 | Digital inclusive. | 数字化的包容性 | 活动 |
| ISO/TC 314/WG 7 | Smart multigenerational neighbourhoods | 聪明的多代居民区 | 活动 |
| ISO/TC 315/WG 2 | Contactless delivery | 非接触式交付 | 活动 |
| ISO/TC 315/WG 3 | Services between businesses - Storage and Transport | 企业间的服务--储存和运输 | 活动 |
| ISO/TC 315/WG 4 | Terminology | 术语 | 活动 |
| ISO/TC 321/WG 1 | Foundations | 基金会 | 活动 |
| ISO/TC 321/WG 2 | Framework | 框架 | 活动 |
| ISO/TC 321/WG 3 | Online dispute resolution | 在线争议解决 | 活动 |
| ISO/TC 321/WG 4 | Evaluation | 评价 | 活动 |
| ISO/TC 322/WG 1 | Sustainable finance framework | 可持续融资框架 | 活动 |
| ISO/TC 322/WG 2 | Terminology | 术语 | 活动 |
| ISO/TC 322/WG 3 | Sustainable finance products and services | 可持续金融产品和服务 | 活动 |
| ISO/TC 323/WG 1 | Terminology, principles, frameworks and management system standard | 术语、原则、框架和管理体系标准 | 活动 |
| ISO/TC 323/WG 2 | Practical approaches to develop and implement Circular Economy | 发展和实施循环经济的实用方法 | 活动 |
| ISO/TC 323/WG 3 | Measuring and assessing circularity | 衡量和评估循环性 | 活动 |
| ISO/TC 323/WG 4 | Circular Economy in practice: experience feedback | 循环经济的实践：经验反馈 | 活动 |
| ISO/TC 323/WG 5 | Product circularity data sheet | 产品循环性数据表 | 活动 |
| ISO/TC 324/WG 1 | Terminology and principles | 术语和原则 | 活动 |
| ISO/TC 324/WG 2 | Operation of platform | 平台的运作 | 活动 |
| ISO/TC 324/WG 3 | Provider verification | 提供者验证 | 活动 |
| ISO/TC 327/WG 1 | Test methods | 测试方法 | 活动 |
| ISO/TC 328/WG 1 | Requirements for preparation and installation procedures | 对准备和安装程序的要求 | 活动 |
| ISO/TC 328/WG 2 | Environmental compatibility of engineered stones during their life cycle | 工程石料在其生命周期内的环境兼容性 | 活动 |
| ISO/TC 328/WG 3 | Terminology | 术语 | 活动 |
| ISO/TC 328/WG 4 | Requirements and test methods | 要求和测试方法 | 活动 |
| ISO/TC 330/WG 1 | Antimicrobial resistance testing | 抗菌剂抗性测试 | 活动 |
| ISO/TC 331/WG 1 | Terminology | 术语 | 活动 |
| ISO/TC 331/WG 2 | Measurement, data, monitoring and assessment | 测量、数据、监测和评估 | 活动 |
| ISO/TC 331/WG 4 | Organizations, strategies and sustainable use | 组织、战略和可持续利用 | 活动 |
| ISO/TC 333/WG 1 | Lithium vocabulary | 锂的词汇 | 活动 |
| ISO/TC 333/WG 2 | Chemical analysis for lithium hydroxide | 氢氧化锂的化学分析 | 活动 |
| ISO/TC 333/WG 3 | Chemical analysis for lithium carbonate | 碳酸锂的化学分析 | 活动 |
| ISO/TC 333/WG 4 | Analysis for hexafluorophosphate | 六氟磷酸酯的分析 | 活动 |
| ISO/TC 333/WG 5 | Sustainability | 可持续发展 | 活动 |
| ISO/TC 333/WG 6 | Analysis for lithium cathode materials | 锂电正极材料的分析 | 活动 |
| ISO/TC 333/WG 7 | Analysis for Lithium chloride | 氯化锂的分析 | 活动 |
| ISO/TC 334/WG 8 | Quality control materials | 质量控制材料 | 活动 |
| ISO/TC 334/WG 9 | Use of reference materials | 使用参考材料 | 活动 |
| ISO/TC 334/WG 10 | RM Terms and definitions | RM术语和定义 | 活动 |
| ISO/TC 334/WG 13 | Qualitative reference materials | 定性参考材料 | 活动 |
| ISO/TC 334/WG 14 | RM Accompanying documents | RM 伴随的文件 | 活动 |
| ISO/TC 334/WG 16 | RM Value assignment | RM值分配 | 活动 |
| ISO/TC 334/WG 18 | Organic purity RMs | 有机纯度的RMs | 活动 |
| ISO/TC 334/WG 19 | Purity RMs for metals | 金属的纯度RMs | 活动 |
| ISO/TC 338/WG 1 | General requirements | 一般要求 | 活动 |
| ISO/TC 340/WG 1 | CNG fuelling stations | CNG加气站 | 活动 |
| ISO/TC 340/WG 2 | LNG fuelling stations | 液化天然气加注站 | 活动 |
| ISO/PC 250/WG 1 | Event sustainability management | 活动的可持续性管理 | 活动 |
| ISO/PC 316/WG 1 | Water Efficient products – Rating | 节水产品 - 评级 | 活动 |
| ISO/PC 317/WG 1 | Privacy by design | 隐私设计 | 活动 |
| ISO/PC 337/WG 1 | Guidelines for the promotion and implementation of gender equality | 促进和实施性别平等的准则 | 活动 |
